NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

FAX ARRIVAL INDICATOR
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 168 NDA-24271, Issue 1.0
FAX ARRIVAL INDICATOR
General Description
When a call from a C.O. line (Direct-Inward-Termination, Direct-Inward-Dialing, Automated Attendant), sta-
tion or tie line has terminated to a facsimile machine, a related lamp on a predesignated Multiline Terminal is
caused to light, indicating reception of a facsimile call.  The lamp indication is as follows:
Station Application
All Multiline...

FEATURE ACTIVATION FROM SECONDARY EXTENSION
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 169
FEATURE ACTIVATION FROM SECONDARY EXTENSION
General Description 
This feature allows the Multiline Terminal user to access an appearance of another extension and program cer-
tain features from that extension.
Station Application
All Multiline Terminals.
Operating Procedure
Refer to the applicable feature for operating procedures.
Service Conditions
1. The following...

FLEXIBLE LINE KEY ASSIGNMENT
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 170 NDA-24271, Issue 1.0
FLEXIBLE LINE KEY ASSIGNMENT
General Description
Multiline Terminals can have any desired line key assignment. This feature permits assignments to be tailored
to each individuals needs. (The terminals primary extension line appearance is the only line key which cannot
be reassigned.)
Station Application
All Multiline Terminals.
Operating Procedure
No manual operation is required....

FLEXIBLE NUMBERING PLAN
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 171
FLEXIBLE NUMBERING PLAN
General Description
The system has a Flexible Numbering Plan. All access codes and station numbers and can be assigned in system
programming.  Refer also to the Single Digit Dialing Features and Specifications which further increases the
flexibility of the system.
Station Application
All stations.
Operating Procedure
Normal call handling procedures apply.
Service...

FLEXIBLE RINGING ASSIGNMENT
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 172 NDA-24271, Issue 1.0
FLEXIBLE RINGING ASSIGNMENT
General Description
This feature allows lines on Multiline Terminals to be individually programmed to ring or not ring.
Station Application
All Multiline Terminals.
Operating Procedure
No manual operation is required.
Service Conditions
1. The following priority applies to ringing of multiple incoming calls:
a. Voice call (Station to Station on extension,...

FORCED ACCOUNT CODE
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 173
FORCED ACCOUNT CODE
General Description
This feature forces the user to enter an Account Code (up to 8 or 10 digits) for all outgoing calls.  The Account
Code must be dialed before dialing the outgoing number.  Calls are processed only when the dialed Account
Codes are valid.
Station Application
All stations.
Operating Procedure
When dialing an outgoing call:
1. Lift the handset and receive...

GROUP CALLAutomatic Conference (6/10 Party)
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 174 NDA-24271, Issue 1.0
GROUP CALL
Automatic Conference (6/10 Party)
General Description
This feature allows a Multiline Terminal user or single line telephone user within the system to establish a con-
ference among as many as six or ten parties. From a Multiline Terminal /Single Line Telephone, a maximum of
9 stations can be paged simultaneously plus the originator. The stations are...

GROUP CALL
2 Way Calling
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 175
Up to four CFT trunks can be accommodated in the system.
The maximum number of conference groups per system when using four CFT trunks (maximum) is:
Four, 6-party conference groups
Two, 10-party conference groups
Two, 6-party conference groups and one, 10-party conference group
A CFT trunk is used for either a 6-party or 10-party conference. Dialed access codes determine which CFT...

GROUP CALL2 Way Calling
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 176 NDA-24271, Issue 1.0
Operating Procedure
To page stations of a group
1. Press the Speaker key or go off hook, and receive a dial tone.
2. Dial  the access code, or press feature access key (Multiline Terminal only), for a desired paging group and
receive a ringback tone.
To answer the paging
1. The called terminals receive ringing. The LCD of the Multiline Terminal shows PAGING, including the sta-
tion number...

GROUP LISTENING
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 177
GROUP LISTENING
General Description
When a Multiline Terminal user makes a call using the handset, pressing the Speaker key will allow others to
listen through the built-in speaker of the Multiline Terminal. The user may continue talking on the handset at
the same time.
Station Application
All Multiline Terminals.
Operating Procedure
To monitor a call
1. Talk with a station/trunk by handset.
2....