NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

CONFERENCE (THREE/FOUR PARTY)
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 118 NDA-24271, Issue 1.0
CONFERENCE (THREE/FOUR PARTY)
General Description
This feature provides a station user the ability to add-on another party (trunk or station) to a call already in
progress. Single Line Telephone users can add up to one additional party and Multiline Terminal users can add
up to two additional parties.
Station Application
All stations.
Operating Procedure
To add a third party
From a...

CONFERENCE (THREE/FOUR PARTY)
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 119
5. Multiline Terminals may allow other Multiline Terminals with the same line button appearance to enter the
conversation (and therefore establish a Conference) by using the Privacy feature. Refer to the Privacy Fea-
tures and Specifications for more information.
6. Once the second party answers, and prior to pressing the Conf key, Multiline Terminals may use the Trans-
fer or...

CONFERENCE (SIX/TEN PARTY)
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 120 NDA-24271, Issue 1.0
CONFERENCE (SIX/TEN PARTY)
General Description
This feature permits a station user or Attendant (conference leader) to establish a Conference among as many
as six or ten parties (including the Conference leader).
Station Application
All stations and Attendant Consoles
Operating Procedure
Using the access code
To make a Conference Call
1. The Conference leader goes off hook, or an...

CONFERENCE (SIX/TEN PARTY)
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 121
3. After the party answers, press the Hold key.
4. Call all desired parties (station or C.O./Tie line) sequentially, using other line keys, and placing each on hold
after the party answers.
5. After holding the last party, press the Conference feature key. The line key associated with the last party
lights green. The last party is connected to the CFT trunk.
6. Sequentially press the...

CONFERENCE (SIX/TEN PARTY)
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 122 NDA-24271, Issue 1.0
6. The maximum number of C.O. line/tie lines that can be connected in a Conference is:
Up to five C.O. line/tie lines for a 6-party Conference
Up to nine C.O. line/tie lines for a 10-party Conference
7. Call charges for C.O. lines are charged to the leader (in SMDR).
8. Ten ports are required per CFT trunk.
9. The CFT time out until the first participant is connected into the CFT...

CONSECUTIVE SPEED DIALING
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 123
CONSECUTIVE SPEED DIALING
General Description
For Speed Dialing, all digits are registered as a Speed Dialing Code. In the case of Consecutive Speed Dialing,
the common portion of the number is registered as a speed calling code, and the remaining digits of each number
are dialed by each individual calling station or by using a Station Speed Dial key on a Multiline Terminal.
Example:
9...

CONSULTATION HOLD
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 124 NDA-24271, Issue 1.0
CONSULTATION HOLD
General Description
This feature permits a station user to hold any incoming or outgoing C.O. call, tie line call, or any intraoffice
call while originating a call to another station user within the system.
Station Application
All stations.
Operating Procedure
From a Multiline Terminal
To hold the original call and place a second call
1. Press the Transfer key and receive...

CONSULTATION HOLD
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 125
2. If the second party hangs up, the calling station will automatically be returned to the original call.
3. If the originating station presses the FLASH key (or momentarily presses the hookswitch), a three-party
Conference will be initiated.
Service Conditions
1. An outgoing exchange network or tie line call can also be made by the station user with a call on Consulta-
tion Hold. Refer to...

CUSTOMER ADMINISTRATION TERMINAL (CAT)
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 126 NDA-24271, Issue 1.0
CUSTOMER ADMINISTRATION TERMINAL (CAT)
General Description
In addition to the Maintenance Administration Terminal (MAT), programming of the system can be done from
selected Multiline Terminals with LCD. The designated Multiline Terminals can be placed in program mode,
and system data can then be changed. To prevent unauthorized changes, password levels are assigned,...

DATA LINE SECURITY
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 127
DATA LINE SECURITY
General Description
This feature allows line circuits which are used for data transmission to be protected from interruptions such as
Attendant Camp-On, Executive Override, and Attendant Override.
Station Application
Not applicable.
Operating Procedure
No manual operation is required.
Service Conditions
1. This feature is assigned in system programming on a per-station...