NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

CALL PICKUPCall Pickup - Group
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 98 NDA-24271, Issue 1.0
Service Conditions
1. All ringing calls directed to an extension, including voice calls, can be picked up by this feature, except for
Trunk Queuing - Outgoing and Call Back.
2. This feature can be activated from feature dial tone.
3. This feature may be allowed or denied based on station Class of Service.
4. A fully restricted station cannot pickup an incoming C.O. call.
5. An...

CALL PICKUPCall Pickup - Designated Group
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 99
Call Pickup - Designated Group
General Description
This method permits a station user to answer an incoming call directed to another group by dialing the Call Pick-
up - Designated Group feature access code and any station within the group to which the ringing station belongs.
Station Application
All stations.
Operating Procedure
Ringing telephone in another Call Pickup...

CALL REDIRECT
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 100 NDA-24271, Issue 1.0
CALL REDIRECT
General Description
Without answering incoming calls or held calls which terminates to the line keys of a Multiline Terminal, the
calls can be transferred to a pre-programmed station or Voice Mail System. Two transferring destination number
can be designated per tenant, in system data programming. This feature can be used together with the Caller ID
Display feature.
Station...

CALL REDIRECT
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 101
6. On the following conditions, the call cannot be transferred by the CRD key because the destination is re-
garded as busy state.
When the call is a Camp-On call, and the destination is a UCD queue.
When the call is held on an extension line/trunk access key, and the destination 
is a UCD queue.
When the call is terminating to or held on a trunk access key, and the destination is setting Call...

CALL TRANSFERCall Transfer - All Calls
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 102 NDA-24271, Issue 1.0
CALL TRANSFER
General Description
This feature permits a station user to transfer a call to another station in the system directly, or with assistance
from the attendant.
Call Transfer - All Calls
General Description
This feature permits a station user to transfer incoming or outgoing calls to another station within the system
without attendant assistance.
Station...

CALL TRANSFER
Call Transfer - Attendant
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 103
3. A three-party Conference can be accessed from the Call Transfer state. The three parties connected can be
as follows:
Three stations
Two stations and one trunk
One station and two trunks
4. A four-party Conference can be accessed from the Call Transfer state by Multiline Terminals only. When
the Consultation Hold of a three-party Conference connection is followed by...

CALLER ID CLASS
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 104 NDA-24271, Issue 1.0
CALLER ID CLASS
General Description
This feature receives the calling subscriber’s name and number sent from a public network using a MODEM
signal and displays the name or number on an LCD of a Multiline Terminal and an Attendant Console.
Station Application
All Multiline Terminals with an LCD and Attendant Consoles.
Operating Procedure
To display the calling subscriber’s name or number when...

CALLER ID CLASS
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 105
Service Conditions
1. Up to 14 digits of the calling subscriber’s name or number can be displayed on the LCD of a Multiline Ter-
minal or an Attendant Console.
2. Up to 16 digits of the calling subscriber’s number can be recorded on the SMDR.
3. Up to 24 digits of the calling subscriber’s number can be sent to the OAI computer.
4. The 4RSTC card and the 4COTG/8COTQ card are required for...

CALLER ID DISPLAY
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 106 NDA-24271, Issue 1.0
CALLER ID DISPLAY
General Description
Without answering incoming calls or held calls which terminates to the line keys of a Multiline Terminal, the
calling party’s information can be confirmed by the indications on the LCD. The following information is indi-
cated according to the kind of the calls.
Station Application
All Multiline Terminals with LCD.
Operating Procedure
1. Press a CID (Caller...

CALLER ID DISPLAY
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 107
3. If there is no incoming/held call on the line key and there is no Camp-On call, the Multiline Terminal does
not come into CID mode even if the CID key is pressed.
4. If there are plural incoming/held calls, Camp-On calls, the following priority for displaying is applied:
a. Camp-On call information set to the call in progress on the Multiline Terminal
b. Incoming/held call information in...