NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

DIRECT DATA ENTRY
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 138 NDA-24271, Issue 1.0
c. In Printout Format 2, even if the data corresponding QUANTITY is not entered, the system does not
recognize that the data entry is an error (no reorder tone is received).
 Example: Input data = 1*2*3*#
1995 04/10 17:20 MON
NO.        220
CODE1              1
CODE2              2
CODE3              3
Printout format 1
1995 04/10 17:20 MON
NO.        220
CODE1              1
QUANTITY...

DIRECT DIGITAL INTERFACE
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 139
DIRECT DIGITAL INTERFACE
General Description
This service feature provides the capability to connect trunks from the NEAX2000 IVS2 directly to T1 carrier
links using either a private or public network.
Operating Procedure
No manual operation is required.
Service Conditions
1. Each Office Hierarchy is defined as follows:
a. Source office
One center will operate as the Source Office. This...

DIRECT DIGITAL INTERFACE
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 140 NDA-24271, Issue 1.0
6. The DTI can be provided with circuit cards to interface with T1 carrier.
7. The DTI boards are mounted in the AP board slot of the Port Interface Module (PIM). 
8. The following two methods may be used for network synchronization (see below):
a. Source - Receiver System (Source)
b. Source - Receiver System (Receiver) 
9. The maximum number of trunks for DTI is 240 ports (10 24 DTI...

DIRECT INWARD DIALING (DID)
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 141
DIRECT INWARD DIALING (DID)
General Description
 This feature provides for incoming calls from the exchange network (except FX or WATS) to reach any station
within the system without attendant assistance.
Station Application
Not applicable.
Operating Procedure
The calling party outside the system dials the appropriate telephone number. The call will ring directly at the
called...

DIRECT INWARD DIALING (DID)
DID Call Waiting
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 142 NDA-24271, Issue 1.0
DID Call Waiting
General Description
 This feature allows an incoming call on a DID trunk or a tie line to automatically be Camped-On to the desti-
nation station if the destination station is busy.
Station Application
All stations.
Operating Procedure
The camp-on occurs automatically once this feature is assigned.  For details on how to respond to the camp-on,
refer...

DIRECT INWARD SYSTEM ACCESS (DISA)
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 143
DIRECT INWARD SYSTEM ACCESS (DISA)
General Description
This feature allows an outside caller to access the system using an exchange network connection without Atten-
dant or station assistance. The outside user may originate calls over any or all of the systems facilities such as
WATS, FX, Tie Line or CCSA. The outside user can also directly call stations and access...

DIRECT INWARD SYSTEM ACCESS (DISA)
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 144 NDA-24271, Issue 1.0
8. If the called station is busy or does not answer, or the number dialed is a feature access code, any one of the
following operations can be set:
The C.O. line can be released.
Dial tone can be supplied.
An alternate call terminating destination (Attendant, Trunk Answer Any Station, Direct Inward Termi-
nation) can be provided.
9. The outside user can access a Digital...

DIRECT INWARD TERMINATION (DIT)
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 145
DIRECT INWARD TERMINATION (DIT)
General Description
This feature automatically routes incoming network exchange calls directly to a preselected station without At-
tendant assistance. The call can then be processed by the called party. Three-party Conference, Call Transfer,
etc., are handled in the same manner as any normal trunk call.
Station Application
All stations.
Operating...

DIRECT OUTWARD DIALING (DOD)
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 146 NDA-24271, Issue 1.0
DIRECT OUTWARD DIALING (DOD)
General Description
This feature permits any station user the ability to gain access to the exchange network by dialing an access code
and receiving new dial tone. The user may then proceed to dial the desired exchange network number.
Station Application
All stations.
Operating Procedure
To place an outside call
From any station
1. Go off-hook and...

DIRECT OUTWARD DIALING (DOD)
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 147
6. Exchange network call completion using the Hotline Outside feature is permitted. The originating station is
automatically routed to the assigned trunk route and the digits are dialed automatically when the station goes
off-hook.
7. This feature is disabled when the switch on the MP card is set to KF registration.