NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

DO NOT DISTURB
Do Not Disturb - Hotel/Motel
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 158 NDA-24271, Issue 1.0
3. Press the RESET key.
4. The above two steps can be repeated for additional stations.
5. Press the RLS key.
To set Do Not Disturb to the station currently connected
1. Press the DD key.
2. Press the SET key.
3. Press the RLS key. 
To cancel Do Not Disturb to the station currently connected
1. Press the DD key.
2. Press the RESET key.
3. Press the RLS key.
From a...

DO NOT DISTURBDo Not Disturb - System
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 159
9. Call Back cannot be set to stations in DND.
10. Recalls will override the DND setting, and ring back to a station in DND.
Do Not Disturb - System
General Description
This feature simultaneously restricts incoming calls to a preassigned group of stations by operation from the Ho-
tel/Motel Front Desk Instrument(s).  Attendant Console(s) and Hotel/Motel Front Desk...

DO NOT DISTURB
Do Not Disturb - System
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 160 NDA-24271, Issue 1.0
9. Refer to the Hotel/Motel Front Desk Instrument Features and Specifications for more information.
10. Refer to Do Not Disturb Features and Specifications for the interactions between DND and system features.  

ELAPSED CALL TIMER
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 161
ELAPSED CALL TIMER
General Description 
 This feature provides a display of the elapsed time while a Multiline Terminal with LCD is connected to any
trunk.
Station Application
All Multiline Terminals with LCD.
Operating Procedure
No manual operation is required.
Service Conditions
1. The elapsed time is displayed in the seven upper left-hand positions of the LCD display.
2. The elapsed time...

ENHANCED 911
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 162 NDA-24271, Issue 1.0
ENHANCED 911
General Description
This feature allows the PBX to transmit a callers’ emergency service identification information to an Enhanced
911 Emergency system.
Station Application
All stations and Attendant Consoles.
Operating Procedure
1. Lift the handset and receive a dial tone.
2. Dial the trunk access code and telephone number (e.g., 911).
3. The system automatically completes a call and...

EXECUTIVE CALLING
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 163
EXECUTIVE CALLING
General Description
This feature allows a station to be assigned a VIP class.  This provides special ringing to a called station when
that station is idle, and automatic sending of three tone bursts to a called station when that station is busy, pro-
vided the call was originated from a station assigned as VIP class.
Station Application
All stations.
Operating Procedure
To...

EXECUTIVE OVERRIDE
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 164 NDA-24271, Issue 1.0
EXECUTIVE OVERRIDE
General Description
This feature allows selected users to override a busy condition on a called station.  A warning tone is transmitted
to both stations in the busy call before the busy condition is overriden, and a three-party Conference is then es-
tablished.
Station Application
All stations.
Operating Procedure
From a Multiline Terminal
1. When busy tone is heard, press...

EXECUTIVE OVERRIDE
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 165
7. Executive Override is denied if the busy station is dialing, in Line Lockout mode, receiving a system gen-
erated tone, protected against Executive Override in Class of Service, protected against any override by
DND key, or when any of the following features are in progress:
Attendant OverrideConsultation HoldCall Back
Data Line SecurityHoldPaging
Call TransferPrivacyCamp-On...

EXTERNAL PAGING WITH MEET-ME
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 166 NDA-24271, Issue 1.0
EXTERNAL PAGING WITH MEET-ME
General Description
This feature allows a station user or attendant dial-access to local voice paging equipment and connects both
parties automatically after the paged party has answered the page by dialing an access code.
Station Application
All stations and Attendant Consoles.
Operating Procedure
To page
From any station
1. The calling station dials...

EXTERNAL PAGING WITH MEET-ME
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 167
Service Conditions
1. Amplifiers and speakers must be provided locally.
2. One trunk circuit from a COT card is required for each zone of external paging.
3. One PN-DK00 (or built-in DK00 in MP) is required for every four zones of external paging in order to share
a common amplifier and background music source.
4. The maximum length of paging access codes is three digits.  Paging...