NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

MESSAGE WAITING
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 218 NDA-24271, Issue 1.0
MESSAGE WAITING
General Description
This feature allows the Attendant Console, Hotel/Motel (H/M) Front Desk Instrument, administrative station,
or Property Management System (PMS) terminal to light a lamp (on an uninterrupted or interrupted basis) on a
Single Line Telephone or Multiline Terminal to indicate a message is waiting.
In addition to the lamp indication control, this feature also...

MESSAGE WAITING
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 219 To cancel Message Waiting while receiving ringback tone or busy tone
1. Press the MW key.
2. Press the RESET key.
3. Press the RELEASE key.
From the Attendant Console
To set Message Waiting
1. Dial the desired station number.
2. Press the MW key.
3. Press the  START key.
4. Press the RELEASE key.
To cancel Message Waiting
1. Dial the desired station number.
2. Press the MW key.
3. Press the...

MESSAGE WAITING
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 220 NDA-24271, Issue 1.0
To check
1. Lift the handset and receive dial tone.
2. Dial the Voice Message Waiting - System replay access code.
3. Dial the message number (0-9) and receive service set tone for 3 seconds.
4. Listen to the message.
5. Restore the handset.
To set
1. Lift the handset and receive dial tone.
2. Dial the Voice Messaging Waiting - System set access code.
3. Dial the message number (0-9) and...

MESSAGE WAITING
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 221
Voice Message Waiting - Individual
To set
1. Lift the handset and receive dial tone.
2. Dial the Voice Message Waiting - Individual set access code and receive feature dial tone.
3. Dial the desired station number and receive service set tone for 3 seconds.
4. Record the message.
5. Restore the handset.
To cancel
1. Lift the handset and receive dial tone.
2. Dial the Voice Message Waiting -...

MESSAGE WAITING
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 222 NDA-24271, Issue 1.0
4. Restore the handset.
 (XXX=Card No.)
To set while receiving ringback tone or busy tone or performing voice call
(from the Attendant Console)
1. Dial 8; receive service set tone for 3 seconds.
2. Press the RELEASE key or CANCEL key.
To retrieve a message (from a Single Line Telephone)
1. Lift the handset and receive dial tone.
2. Dial the Voice Message Waiting - Individual retrieve access...

MESSAGE WAITING
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 223
8. When the user of a station that has a Message Waiting indication lifts the handset, the station can receive
special dial tone by system programming.  It reminds the station user that a message is waiting.
Voice Message Waiting - System/Individual
1. A maximum of 10 messages can be recorded for Voice Message Waiting - System.  A maximum of 128
messages can be set simultaneously for Voice...

MISCELLANEOUS TRUNK ACCESS
CCSA Access
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 224 NDA-24271, Issue 1.0
MISCELLANEOUS TRUNK ACCESS
General Description
This feature allows the connection of various types of external facilities. In addition to Loop and Ground Start
Trunks, the following can also be interfaced with the system: CCSA Lines Code Calling Equipment, Dictation
Equipment, Foreign Exchange (FX) Lines, Radio Paging Equipment, and Wide Area Telephone Service
(WATS) lines....

MISCELLANEOUS TRUNK ACCESS
Code Calling Equipment Access
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 225
Service Conditions
1. An access code needs to be assigned for CCSA Access.
2. 4-Wire Tie Line circuits (ODT board) must be provided for the interface with CCSA network.
3. The maximum number of ODT boards are 32/PIM.
4. Immediate, second dial tone, wink start or delay dial operation is available by system data on a trunk route
basis. 
5. When the called...

MISCELLANEOUS TRUNK ACCESS
Foreign Exchange (FX) Access
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 226 NDA-24271, Issue 1.0
Operating Procedure
To access the Dictation Equipment from any station
1. Go off hook and receive dial tone.
2. Dial the Dictation Equipment feature access code.
3. Proceed according to operation procedures of the Dictation Equipment.
Service Conditions
1. One trunk circuit is required for each piece of dictation interface equipment accessed.
2. Dictation...

MISCELLANEOUS TRUNK ACCESS
Radio Paging Equipment Access
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 227
2. Care should be excerised in system data assignment when using this feature in conjunction with Least Cost
Routing (LCR) since FX lines may require that the digit 1 be dialed prior to the desired number, or that the
area code be deleted.
3. The maximum capacity of all trunk, including FX lines, cannot exceed 256 lines.
4. Access to this feature can be...