NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

REMOTE HOLD
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 268 NDA-24271, Issue 1.0
REMOTE HOLD
General Description
This feature allows a Multiline Terminal user to hold it on the line button of transferred terminal, by pressing
the Hold key.
Station Application
All Multiline Terminals.
Operating Procedure
1. Multiline Terminal-A is talking with station/trunk party.
2. Press the Transfer key and dial the station number of Multiline Terminal-B.
a. Station/trunk party hears music on...

REMOTE PIM
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 269
REMOTE PIM
General Description
When the system has two or more PIMs, the PIMs can be installed separately by T1 digital interface. A maxi-
mum of 3 PIMs can be installed apart at the remote site.     
Station Application
All stations.
Operating Procedure
The same operating procedure as the regular NEAX2000 IVS2 apply for each service feature.
Service Conditions
1. The Main Site must be the NEAX2000...

RESERVE POWER
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 270 NDA-24271, Issue 1.0
RESERVE POWER
General Description 
This feature provides backup power from a 24V battery source in the event of a commercial power failure.
Station Application
Not applicable.
Operating Procedure
No manual operation is required.
Service Conditions
1. Batteries should be installed inside the PIM or separately from the system.
2. Sealed lead acid (or maintenance free) batteries must be locally...

RESIDENT SYSTEM PROGRAM
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 271
RESIDENT SYSTEM PROGRAM
General Description
This feature provides the installers a simple procedure to have the system generate system data according to the
system hardware configuration, thereby providing immediate operation and shorter programming time. When
activated, the system scans hardware configuration (such as line/trunk card slot location) and assigns system
data (such as...

RESIDENT SYSTEM PROGRAM
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 272 NDA-24271, Issue 1.0
02 for 4 Wire E&M Tie Lines
03 for Direct Inward Dial lines
Incoming call indication:
Provided at trunk line appearance LED.
g. Trunk Route Data:
Following data is assigned on a trunk route basis.
Type of trunk:
RT00 
→ Direct Distance Dialing
RT01, RT02 
→ E&M Tie Lines (2W/4W)
RT03 
→ Direct Inward Dialing
Type of address signaling for all trunk routes is DTMF for incoming and...

RESIDENT SYSTEM PROGRAM
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 273
50 A130 Internal Zone Paging  group 0
 For calling 51 A131  group 1
52 A132  group 2
53 A133  group 3
54 A134  group 4
55 A138 Internal Zone Paging  group 0
 For answering 56 A139  group 1
57 A140  group 2
58 A141  group 3
59 A142  group 4
5* A024
Timed Reminder/Automatic Wake UpSet
5# A025 Cancel
60 A163 Voice Call/Ring Tone programming
62 A110 Assignment of station name
66 A039 BGM on...

RESIDENT SYSTEM PROGRAM
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 274 NDA-24271, Issue 1.0
Note:
Refer to the Variable Timing Parameters feature for default data relating to timeouts. *5 A010
Call Forwarding-All CallsEntry
#5 A011 Cancel
*6 A012
Call Forwarding-No Answer/Busy 
LineEntry
#6 A013 Cancel
*7 A018
Call Forwarding-DestinationEntry
#7 A019 Cancel
*8 A022
Do Not DisturbSet
#8 A023 Cancel
*9 A040
MW LampSet
#9 A041 Reset
** A069 Last Number Redial
*# A085 Account Code...

RETURN MESSAGE SCHEDULE DISPLAY
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 275
RETURN MESSAGE SCHEDULE DISPLAY
General Description
This feature permits any station user to register his/her Return Schedule from his/her phone when he/she leaves
his/her desk or the premises, and have the Return Schedule displayed on a calling Multiline Terminal with an
LCD during his/her absence.
Station Application
All stations can set a Return Schedule; however, only...

RETURN MESSAGE SCHEDULE DISPLAY
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 276 NDA-24271, Issue 1.0
6. Up to three different messages can be selected:
a.IN:BACK:  recommended when the station user is not at his/her desk but is still on premises (in a 
meeting, in the building, etc.) Provides an hour and minute display.
b.OUT:BACK:  recommended when the station user has left the premises but will be back within the
same day.  Provides an hour and minute display.
c.AWAY: BACK
:...

ROOM CUTOFF
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 277
ROOM CUTOFF
General Description
This feature allows the Attendant Console, Hotel/Motel (H/M) Front Desk Instrument, or Property Management
System (PMS) terminal, or guest room telephones using a special access code, to temporarily restrict guest room
telephones from making unauthorized calls when guests are away from their room, and when rooms are in
Check Out status.
There are two types of Room...