NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

ROOM CUTOFF
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 278 NDA-24271, Issue 1.0
To reset Room Cutoff from the Hotel/Motel Front Desk Instrument
1. Press the RC key.
2. Dial the desired station number.
3. Press the RESET key. The above two steps can be repeated for other stations.
4. Press the RLS key.
To set Room Cutoff from the Hotel/Motel Front Desk Instrument while engaged in conversation with station
1. Press the RC key.
2. Press the SET key.
3. Press the RLS key.
To...

ROOM CUTOFF
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 279
Service Conditions
1. Stations in Room Cutoff condition are able to place outgoing calls using the Attendant Assisted Calling fea-
ture.
2. If the station under Room Cutoff status dials a C.O. line access code and/or a special area code, the station
is rerouted to one of the following:
Reorder tone
Attendant Console
3. Room Cutoff is automatically set by Check Out operation, and it is...

ROOM STATUS
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 280 NDA-24271, Issue 1.0
ROOM STATUS
General Description
This feature provides the Hotel/Motel (H/M) Front Desk Instrument with a visual display of the guests room
status. A supplementary print out (individual and summary) can be provided.
Station Application
All stations.
Operating Procedure
To display Room Status from a Hotel/Motel Front Desk Instrument:
1. Press the STS key.
2. Dial the desired station number.
3. Press...

ROUTE ADVANCE
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 281
ROUTE ADVANCE
General Description 
This feature automatically routes outgoing calls over alternate facilities when the first choice trunk group is
busy. Users select the first choice route by dialing the corresponding access code, and the equipment then ad-
vances through alternate trunk groups only if the first choice is busy.
Station Application
All stations.
Operating Procedure
No manual...

SAVE AND REPEAT
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 282 NDA-24271, Issue 1.0
SAVE AND REPEAT
General Description
This feature allows a Multiline Terminal to save a specific dialed number and then redial that number at a later
time.
Station Application
All Multiline Terminals.
Operating Procedure
1. Go off-hook and seize any idle line. Dial a number.
2. After the number has been dialed, press the Save and Repeat key. The dialed number is stored for future use.
The...

SECURITY ALARM
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 283
SECURITY ALARM
General Description
This feature provides an indication on the Attendant Console when a contact closure occurs.
Station Application
Not applicable.
Operating Procedure
No manual operation is required.
Service Conditions
1. The contact to be monitored is connected across Tip (T) and Ring (R) of one circuit on a 4LC/8LC card.
2. The contact installed must be a normally open contact....

SET RELOCATION
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 284 NDA-24271, Issue 1.0
SET RELOCATION
General Description
This feature enables two stations to be moved from one location to another without reprogramming station data
at MAT.
Station Application
From Multiline Terminal to Multiline Terminal.
From Single Line Terminal to Single Line Terminal.
Operating Procedure
To move Station A to Station B:
1. Lift handset at Station A; receive Dial Tone.
2. Dial Authorization Code...

SET RELOCATION
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 285
4. When the station is busy, it cannot be moved.
5. This feature is selectable by service restriction class.
6. When Multiline Terminal is moved to Multiline Terminal:
The LED status of Multiline (Trunk, station) cannot be moved.
If Call Forwarding-All Calls/-Busy Line/-No Answer, Do Not Disturb, Message Waiting (MW), or
Busy-Out is setting, the associated LED will be lit.
7. When Single Line...

SINGLE DIGIT DIALING
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 286 NDA-24271, Issue 1.0
SINGLE DIGIT DIALING
General Description
This feature provides the station user the ability to dial single digit codes to access certain features while still
allowing the same digit dialed to be used as the first digit of guest room station numbers.
Station Application
All stations.
Operating Procedure
Normal call processing procedures apply.
Service Conditions
1. This feature is available...

SOFTWARE LINE APPEARANCE (VIRTUAL EXTENSIONS)
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 287
SOFTWARE LINE APPEARANCE (VIRTUAL EXTENSIONS)
General Description
This feature permits assignment of circuits which do not physically exist, to be used as secondary extensions on
Multiline Terminals. There are 256 software lines that can be assigned to line keys and used as desired.
Station Application
All Multiline Terminals.
Operating Procedure
Normal call...