NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

STATION SPEED DIALING
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 298 NDA-24271, Issue 1.0
To program numbers in memory
1. Go off-hook and dial the Station Speed Dialing programming code.
2. Dial the abbreviated code to be assigned. 
3. Dial the trunk access code and the desired telephone number.
4. Restore the handset.
Service Conditions
1. Each Station Speed Dialing buffer can store a maximum of 26 digits, including pauses. The trunk access
code (maximum 4 digits) must be...

STATION SPEED DIALING
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 299
This One Touch key is effective when the station user is in idle or seizing a trunk. When talking to the
outside party, the One Touch key sends only outside number as DTMF signal.
When pressing another One Touch key during the sending DTMF signal after a called station
answered, the stored number in the second One Touch key is sent out as DTMF signal continuously.
If the second One Touch...

STEP CALL
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 300 NDA-24271, Issue 1.0
STEP CALL
General Description
This feature allows the Attendant or station user, after calling a busy station, to call an idle station by simply
dialing an additional digit. This feature will operate only if the number of the idle station is identical to that of
the busy station in all respects, except the last digit.
Station Application
All stations.
Operating Procedure
1. The dialed station (220) is...

SUPERVISORY CONTROL OF PERIPHERAL EQUIPMENT
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 301
SUPERVISORY CONTROL OF PERIPHERAL EQUIPMENT
General Description
When various types of peripheral equipment (such as facsimiles, dictation equipment, Voice Mail, etc.) are con-
nected to the line circuits of the system, this feature allows the loop of the line circuit concerned to open for a
programmable interval, and send a release signal to the peripheral equipment...

SYSTEM SPEED DIALING
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 302 NDA-24271, Issue 1.0
SYSTEM SPEED DIALING
General Description
This feature provides all users the ability to dial frequently called numbers using an abbreviated call code.
Station Application
All stations.
Operating Procedure
From Multiline Terminals
1. Press the Speaker key or lift the handset and receive extension dial tone.
2. Press the System Speed Dialing access feature key (one touch key) or dial the...

SYSTEM TRAFFIC
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 303
SYSTEM TRAFFIC
General Description
The NEAX2000 IVS2 is the stored program controlled digital electronic PABX employing PCM time division
switching technique. Single stage time division switching is employed for all configurations of NEAX2000
IVS
2 up to its maximum line and trunk configuration. Traffic capacity is expressed in Busy Hour Call Attempts
(BHCA). This value is the number of call...

TENANT SERVICE
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 304 NDA-24271, Issue 1.0
TENANT SERVICE
General Description
This feature provides for more than one organization (tenant) to share the same system. Through system pro-
gramming, each organization may be restricted to its own C.O. trunks, Attendant Consoles and extension group.
In addition, incoming calls are directed to the specific tenant. 
Station Application
Not applicable.
Operating Procedure
No manual operation is...

TIE LINES
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 305
TIE LINES
General Description
This feature allows any station user dial access or direct access to an E&M Tie Line.
Station Application
All stations.
Operating Procedure
To dial access an E&M Tie Line
1. Lift handset and receive dial tone.
2. Dial E&M Tie Line access code.
3. Dial desired number.
To directly access an E&M Tie Line
1. Lift handset or press Speaker key and receive dial tone.
2. Press...

TIE LINE TANDEM SWITCHING
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 306 NDA-24271, Issue 1.0
TIE LINE TANDEM SWITCHING
General Description
This feature allows Trunk-to-Trunk connections through the system without the need for any Attendant assis-
tance or control. The major use of this feature is in association with a dial tandem tie line network to allow Tie
Line connections and incoming Tie Line calls automatic access to, and completion of, local C.O. calls.
Station...

TIMED QUEUE
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 307
TIMED QUEUE
General Description
When a user originates an outgoing trunk call and the called party is busy or does not answer, the caller can set
the Timed Queue feature. When this feature is set, the trunk seizure is repeated and the number is redialed after
a predetermined time interval.
Station Application
Multiline Terminals.
Operating Procedure
1. Press the Speaker key and receive dial tone.
2....