NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

PROPRIETARY MULTILINE TERMINAL
Multiple Line Operation
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 258 NDA-24271, Issue 1.0
2. When the MIC LED is off, Intercom voice signals will still be received, but the user must activate the mi-
crophone in order to respond using Handsfree Answerback.
Multiple Line Operation
General Description
This feature allows for the appearance of multiple lines on the Flexible Line Keys and feature keys of all Mul-
tiline Terminals.
Station...

PROPRIETARY MULTILINE TERMINAL
Mute Key
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 259
Mute Key
General Description
This feature allows the distant extension user, of a station user that presses a mute key during conversation, not
to hear the station user’s voice though the station user can hear the distant extension user’s voice. By pressing
the mute key again, the mute status returns to original conversation.
Station Application
Multiline Terminals (Dterm...

PROPRIETARY MULTILINE TERMINAL
Prime Line Pickup
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 260 NDA-24271, Issue 1.0
Operating Procedure
With a call in progress using handset
1. The terminal receives an incoming extension call directed to the Primary Extension, and hears voice-page
alert tone.
2. Respond hands-free (when MIC LED is lit).
3. Press the Answer key to respond with the handset. The original call is automatically put on Non-exclusive
Hold.
To set Voice or Tone mode
1....

PROPRIETARY MULTILINE TERMINAL
Recall Key
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 261
Service Conditions
1. One Prime Line per station is allowed. Prime Line is assigned on a per-station basis by the Maintenance
Administration Terminal (MAT) or Customer Administration Terminal (CAT).
2. Only extensions or Direct Trunk Appearances can be assigned as Prime Lines.
3. The default setting for Prime Line is the stations primary extension.
Recall Key
General...

PROPRIETARY MULTILINE TERMINAL
Relay Control Function Key
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 262 NDA-24271, Issue 1.0
3. On trunk routes programmed as CENTREX, regardless of whether they are accessed using an extension or
Trunk Direct Appearance, a timed disconnect corresponding to a hookflash is sent to the distant exchange.
The duration of the hookflash is programmable on a system basis.
4. On Trunk Direct Appearances, a timed disconnect (of the same duration as that...

PROPRIETARY MULTILINE TERMINAL
Ring Frequency Control
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 263
Ring Frequency Control
General Description
The ring frequency of the Multiline Terminal can be controlled on a station basis in system programming (four
frequencies are available) or by use of a function key on the Multiline Terminal.
Station Application
All Multiline Terminals.
Operating Procedure
To change Ring Frequency:
1. Press the Feature key followed...

PROPRIETARY MULTILINE TERMINAL
Soft Keys
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 264 NDA-24271, Issue 1.0
3. Ringing Line Pickup has priority over Prime Line Pickup in any case.
4. The Prime Line Pickup feature takes priority over Ringing Line Pickup when the Speaker key is used to
answer the call. If necessary, the Prime Line Pickup feature can be disabled on a per station basis. 
Soft Keys
General Description
According to the status of the Multiline Terminal, function keys...

PROPRIETARY MULTILINE TERMINAL
Soft Keys
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 265
8. The following list provides status and an example of the Soft Key function:
STATUS
Idle state
During dialing (holding no call)
During dialing (holding a station/trunk)
During calling (holding no call)
During calling (holding a station/trunk)
Being called
When called party is busy (holding no call)
When called party is busy (holding a station/trunk)
When...

PROPRIETARY MULTILINE TERMINAL
Volume Control
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 266 NDA-24271, Issue 1.0
Volume Control
General Description
Multiline Terminals are equipped with common Volume Control keys for:
Built-in Speaker / Handset Receiver Volume
Ring Volume
C.O. Transmission Level
LCD contrast
Ring Tone Frequency
The Volume Control keys are located on the lower front side of Multiline Terminals (UP 
↑ and DOWN 
↓).
Station Application
All Multiline...

Q-SIG CIRCUIT SWITCHED BASIC CALL - ETSI VERSION
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 267
Q-SIG CIRCUIT SWITCHED BASIC CALL - ETSI VERSION
General Description
This feature provides a tie-line connection between NEAX2000 IVS2 and the other Q-SIG PBX using the ISDN
protocol in conformity with ETS 300 172 standardized by ETSI (European Telecommunications Standards In-
stitute).
Note 1:
Layer 2 interface should be inconformity with Q.921.
Note 2:...