NEC Neax 2000 Ivs2 Business/Hotel/Data Features And Specifications

STACK DIAL
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 288 NDA-24271, Issue 1.0
STACK DIAL
General Description
This feature enables a Multiline Terminal or an Attendant Console to remember the numbers dialed in the pre-
ceding five calls, including the last number dialed. The stack dial numbers are sequentially displayed on the
LCD, thus allowing the station user to make an outgoing call by selecting the desired dialed number from the
display.
Station Application
All Multiline...

STACK DIAL
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 289
Example
Service Conditions
1. The Stack Dial feature memorizes the numbers dialed for the last five calls (unless the same number is dialed
twice) inclusive of the last number, and allows redial using the memorized numbers.
2. For Stack Dial, station numbers and C.O. line numbers (inclusive of trunk access codes, routes, route ad-
vance, and Least Cost Routing) are memorized but feature access codes...

STACK DIAL
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 290 NDA-24271, Issue 1.0
5. When the lower line of the LCD is being used by Data Communication/OAI, Stack Dial is not available.
6. The maximum number of digits that can be memorized by Stack Dial is 32. The number of digits to be dis-
played on the LCD ranges from 1 to 16.
7. When only one number is registered by Stack Dial, blank is displayed on the lower line of the LCD when
the Redial key is pressed. If redial is...

STATION HUNTING
Station Hunting - Circular
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 291
STATION HUNTING
General Description
Three Station Hunting arrangements are available. Station Hunting - Circular processes the call no matter which
station in the hunt group is called. Station Hunting - Terminal initiates a hunt only when the pilot number of a
hunt group is called. Station Hunting - Secretarial is initiated when a busy secretarial station in a Station...

STATION HUNTING
Station Hunting - Terminal
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 292 NDA-24271, Issue 1.0
11. This feature will be activated whenever the hunt group is dialed or terminated under the following condi-
tions:
Dialed from station
Dialed from Attendant Console
Dialed from Direct Inward Dialing (DID)
Dialed from Tie Line
Terminated by Direct In Termination (DIT)
Terminated by Hotline - Inside/Outside
Terminated by Off-Hook Alarm
Terminated by Priority...

STATION HUNTING
Station Hunting - Secretarial
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 293
8. The priority for call handling by features, to a pilot station, is as follows:
Call Forwarding - All Calls
Call Forwarding - Busy Line
Camp-On (Call Waiting Method/Transfer Method)
Station Hunting
9. Recalls (Call Back, Call Park, Camp-On, Call Transfer, etc.) return to the originating station and do not
hunt.
10. This feature will be activated whenever the...

STATION HUNTING
Station Hunting - Secretarial
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 294 NDA-24271, Issue 1.0
4. Any number of stations in Station Hunting - Terminal groups and Station Hunting - Circular groups can
have their calls rerouted to a station within the Station Hunting - Secretarial group. In practice, it is best for
the pilot number of Station Hunting - Terminal groups and every member of Station Hunting - Circular
groups to be assigned an entry extension into...

STATION MESSAGE DETAIL RECORDING (SMDR)
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 295
STATION MESSAGE DETAIL RECORDING (SMDR)
General Description
This feature provides a call record for outgoing Station-to-Trunk calls and incoming Trunk-to-Station calls (in-
cluding Data Call). This facilitates cost control by identifying trunk use and misuse by individual stations. Sta-
tion Message Detail Recording (SMDR) enables call billing to customers and clients,...

STATION MESSAGE DETAIL RECORDING (SMDR)
NEAX2000 IVS2
   Business/Hotel/Data Features and SpecificationsPage 296 NDA-24271, Issue 1.0
When a call is completed, the record is sent to the output device and is removed from memory. If the amount
of calls exceed the SMDR memory, those overflow calls will not be recorded.
7. The built-in SMDR can not be provided when AP00 is mounted.
8. The built-in SMDR does not provide a record of tandem calls.
9. Account Codes, Forced Account Codes, Authorization Codes and...

STATION SPEED DIALING
NEAX2000 IVS2
Business/Hotel/Data Features and Specifications  
NDA-24271, Issue 1.0  Page 297
STATION SPEED DIALING
General Description
This feature allows a station user to dial frequently called numbers by dialing an access code and an abbreviated
code, or by pressing a One Touch key assigned for Station Speed Dialing capability.
Station Application
All stations.
Operating Procedure
Multiline Terminals
To operate using a One Touch key:
Press the One Touch key associated with the...