Home > NEC > Communications System > NEC Neax 2000 Ivs Installation Procedure Manual

NEC Neax 2000 Ivs Installation Procedure Manual

    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2000 Ivs Installation Procedure Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							CHAPTER 3 ND-45492 (E)
    Pag e 1 54
    Revision 2.0
    Confirm the entered system data and hardware, including cable connection, by completing the following oper-
    ational tests.
    • Basic Connection Test at MDF
    • Station Line Test (Operator Call from all stations)
    • Central Office Trunk Test (Incoming, Outgoing)
    • Tie Line Trunk Test (Incoming, Outgoing)
    • Service Feature Test
    • Call Transfer
    • Step Call
    • Executive Right of Way
    • Call Hold
    • Call Back
    • Call Forwarding-All Calls/Don’t Answer/Busy Line
    • Call Pickup
    • Station Hunting-Pilot/Circular
    • Speed Calling-System/Station
    • Paging Access
    • Announcement Service
    •etc.
    NAP 200-011
    Sheet 1/1
    Operation Test 
    						
    							ND-45492 (E) CHAPTER 3
    Page 155
    Revision 2.0
    1. Cleaning
    Clean the following places:
    • Inside of the main equipment, especially the bottom of the base.
    • On the Top Cover.
    • Around the Main Equipment and the MDF.
    • Keyboard on the Attendant Console.
    2. Visual Check
    (1) Check to see if all circuit cards are in their positions correctly.
    (2) Check that the cable connections in the PIM are correctly and completely connected, and the routing of the
    cables has been done smoothly and neatly.
    (3) Check to see if the MAT is removed.
    NAP 200-012
    Sheet 1/1
    Cleaning and Visual Check 
    						
    							CHAPTER 3 ND-45492 (E)
    Pag e 1 56
    Revision 2.0
    Mount the Front Cover onto each PIM and attach it with the screw provided, as shown in Figure 013-1.
    Figure 013-1  Mounting of the Front Cover
    NAP 200-013
    Sheet 1/1
    Mounting of the Front Cover
    PIM
    FRONT
    FRONT COVER 
    						
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2000 Ivs Installation Procedure Manual