NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.1 Addendum-001
Page 133February, 1996
Direct Inward System Access (DISA)
6. A dedicated trunk is used for DISA access.  The outside user dials a dedicated number to access this capa-
bility.
7. DISA Codes can be printed out in the SMDR record for Tandem Connection.
8. If the called station is busy or does not answer, or the number dialed is a feature access code, any one of the
following operations can be set:
• The C.O....

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 134NDA-24158, Issue 2
Direct Inward Termination (DIT)
Direct Inward Termination (DIT)
General Description
This feature automatically routes incoming network exchange calls directly to a preselected station without At-
tendant assistance.  The call can then be processed by the called party.  Three-party Conference, Call Transfer,
etc., are handled in the same manner as any normal trunk call.
Station Application
All stations.
Operating...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 135
Direct Outward Dialing (DOD)
Direct Outward Dialing (DOD)
General Description
This feature permits any station user the ability to gain access to the exchange network by dialing an access code
and receiving new dial tone.  The user may then proceed to dial the desired exchange network number.
Station Application
All stations.
Operating Procedure
To place an outside call
n  From any station
1. Go off-hook and receive...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 136NDA-24158, Issue 2
Direct Outward Dialing (DOD)
6. Exchange network call completion using the Hotline Outside feature is permitted.  The originating station
is automatically routed to the assigned trunk route and the digits are dialed automatically when the station
goes off-hook.
7. This feature is disabled when the switch on the PN-CP00 (MP) is set to KF registration.  

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2 Addendum-007
Page 137August, 1998
Direct Station Selection/Busy Lamp Field (DSS/BLF) Console
Direct Station Selection/Busy Lamp Field 
(DSS/BLF) Console
General Description
This feature allows an EDW-48-2A unit associated with a Multiline Terminal to be used as a Direct Station Se-
lection/Busy Lamp Field (DSS/BLF) Console.  When the buttons on the EDW-48-2A unit are programmed for
Direct Station Selection (DSS) buttons, up...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 138NDA-24158, Issue 2
Direct Station Selection/Busy Lamp Field (DSS/BLF) Console
Busy Out Status Console
4. When a call is made using the DSS/BLF Console, the associated Multiline Terminals LCD displays the
same indication that is provided for internal calls made from the line keys of the Multiline Terminal.
5. Feature Access keys cannot appear on the DSS/BLF Console.
6. When the EDW-48-2A unit is assigned as a DSS/BLF Console, the console...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 139
Direct Station Selection/Busy Lamp Field (DSS/BLF) Console
Do Not Disturb Console
Service Conditions
1. If the system is initialized (Reset) the Console Function Mode will return to DSS/BLF.
2. The Busy Out Status of a station cannot be set or cancelled from a Busy Out Status Console.
3. Refer to the DSS/BLF Console and the Uniform Call Distribution Features and Specifications for more de-
tails. 
Do Not Disturb...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 140NDA-24158, Issue 2
Direct Station Selection/Busy Lamp Field (DSS/BLF) Console
Room Cutoff Console
Station Application
All stations with a DSS/BLF Console.
Operating Procedure
To set and cancel Message Waiting:
1. Depress the MW key.  When stations are currently in MW their associated LED will light green.
2. Depress the Function Mode key: an LED associated with the Function Mode key will light red.
3. Depress the desired DSS key(s) to...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 141
Direct Station Selection/Busy Lamp Field (DSS/BLF) Console
Wake Up No Answer Console
3. Refer to the DSS/BLF Console and the Room Cutoff Features and Specifications for more details.
Wake Up No Answer Console
General Description
This feature allows an EDW-48-2A unit associated with a Multiline Terminal to be used as a Wake Up No An-
swer (WU) Console.  This feature is activated by a function mode key on a DSS/BLF...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 142NDA-24158, Issue 2
Distinctive Ringing
Distinctive Ringing
General Description
This feature provides Distinctive Ringing patterns to the station so that the station user can distinguish between
internal and external incoming calls. This feature also enables the LED associated with the line key of the Mul-
tiline Terminal to flash in two colors according to the kind of incoming call.
Station Application
All stations.
Operating Procedure...