NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 161-1Addendum-007 NDA-24158, Revision 2.7
August, 1998
Group Call
Automatic Conference (6/10-Party)
Group Call
Automatic Conference (6/10-Party)
General Description
This feature allows a Dterm user or single line telephone user within the system to establish a conference among as
many as six or ten parties. From a Dterm/single line telephone, a maximum of 9/stations can be paged simultaneously
plus the originator. The stations are assigned...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.7 Addendum-007
Page 161-2August, 1998
Group Call
Automatic Conference (6/10-Party)
3. Up to eight groups can be assigned as conference groups by system data.
4. The maximum number of participants which can be connected in a conference is:
• Six participants (inclusive of the leader) when one CFT trunk is used.
• Ten participants (inclusive of the leader) when two CFT trunks are used.
Up to four CFT trunks (PN-CFTA) can be...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 161-3Addendum-007 NDA-24158, Revision 2.7
August, 1998
Group Call
2 Way Calling
2 Way Calling
General Description
This feature allows a Dterm/single line telephone to page a maximum of fifteen parties simultaneously including the
originator. After one of paged parties answers, the paging becomes the 2 Way Calling between the originator and
the first answered party, automatically stops paging other parties. The stations are assigned to the...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.7 Addendum-007
Page 161-4August, 1998
Group Call
2 Way Calling
7. A station can be paged in the idle state. When the station is busy at the time of paging, the station will not
be paged even if the station returns to idle afterward.
8. Even if a station sets Call Forwarding, the originator can page the station. 

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 162Addendum-003 NDA-24158, Revision 2.3
October, 1996
Group Listening
Group Listening
General Description
When a Multiline Terminal user makes a call using the handset, pressing the SPKR key will allow others to lis-
ten through the built-in speaker of the Multiline Terminal.  The user may continue talking on the handset at the
same time.
Station Application
All Multiline Terminals.
Operating Procedure
To monitor a call:
1. Talk with a...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 163
Handsfree Answerback
Handsfree Answerback
General Description
This feature allows the station user to answer a voice call without lifting the handset.
Station Application
All Multiline Terminals.
Operating Procedure
To answer a voice call:
1. Make sure the MIC (Microphone) is active and the associated LED is lit.
2. Respond to call handsfree.
Service Conditions
1. Handsfree Answerback may only be used when responding...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 164NDA-24158, Issue 2
Handsfree Dialing and Monitoring
Handsfree Dialing and Monitoring
General Description
This feature allows the station user to dial or monitor a call without lifting the handset.
Station Application
All Multiline Terminals.
Operating Procedure
To initiate a call
1. Press the SPKR key and receive dial tone.
2. Dial the desired number.
3. When the called party answers, lift the handset.
To monitor a call
1. Press the...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 165
Hold
Call Hold
Hold
General Description
This feature permits a user to Hold a call in progress.  After Hold has been set, the station user can make or
answer new calls.
Call Hold
General Description
This feature permits a user to Hold a call in progress by sending a hookflash and dialing the Call Hold feature
access code, or by pressing the Call Hold key.  This line can then be used for originating another call or...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 166NDA-24158, Issue 2
Hold
Dual Hold
2. The original call rings back to Multiline Terminal.
3. Lift the handset and continue with the original call.
To Hold a call and return to original call
n  From a Single Line Telephone
1. Press the FLASH key (or momentarily press the hookswitch) and receive special dial tone.
2. Dial the Call Hold feature access code.  The call is now on Hold.
3. The original call is automatically returned. 
n  From a...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 167
Hold
Exclusive Hold
Operating Procedure
Internal party connection from a Multiline Terminal:
1. Station A depresses the HOLD key and Station B is placed on hold.
2. Station B depresses the HOLD key and Station A is placed on hold.
3. Dual Hold is now in progress.  
Service Conditions
1. The party who placed the other party on Hold first will not receive a recall until the other party releases the
Dual Hold.  
2. This...