NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 208Addendum-005 NDA-24158, Revision 2.5
October, 1997
Message Center Interface (MCI)
3. Follow the instructions given by the voice mail system.
To retrieve a voice mail message from the voice mail system
1. The Message Waiting lamp is lit or the LCD displays: 
[MSG]
2. Go off hook and receive dial tone. 
3. Dial the voice mail extension number and receive ringback tone. The LCD displays:
[    xxxx]
      VMS: Voice mail extension number
4....

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.5 Addendum-005
Page 208-1October,  1997
Message Center Interface (MCI)
13. The Voice Mail Integration (Inband) feature cannot be combined with voice mail through the Message Cen-
ter Interface in the system. Either the Voice Mail Integration (Inband) feature or Message Center Interface
feature must be selected in system programming.
14. When terminating a call with the ANI information to the VMS through the MCI, the...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 209
Message Registration
Message Registration
General Description
This feature provides output from the system to a call accounting system using an RS-232C connector.  This
allows the Hotel/Motel clerk to retrieve the information needed to charge for local and toll calls.
Station Application
Not applicable.
Operating Procedure
No manual operation is required.
Service Conditions
1. An AP00 board is required for this...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 210NDA-24158, Issue 2
Message Reminder
Message Reminder
General Description 
This feature allows a user or Attendant to turn on the message waiting (MW) lamp of a Single Line Telephone,
or the Message Reminder (MSG) LED of a Multiline Terminal (if assigned).
Station Application
All stations.
Operating Procedure
To set Message Reminder from a Single Line Telephone
1. Lift the handset and receive dial tone.
2. Dial the Message Reminder set...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 211
Message Reminder
To clear the message indication without calling the station that set the message, from a Single Line Tele-
phone or a Multiline Terminal
1. Lift the handset and receive dial tone.
2. Dial the Message Reminder search access code.
3. Dial 3.   The message indication is cleared.
4. Restore the handset.
5. If more than one message has been set,  repeat the above procedure as required. 
To  Search/...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 212NDA-24158, Issue 2
Message Reminder
2. Dial the Message Reminder cancel code.
3. Dial the desired station number and receive feature dial tone.  The message is cleared at the dialed station.
4. Restore the handset.
Service Conditions
1. Single Line Telephones must be connected to a 4LCD card for this feature to operate.  (+80Vdc on - board
power supply is included).  Single Line Telephones must be equipped with message waiting lamps for...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.8 Addendum-008
Page 213February, 1999
Message Waiting (Single/Multiple)
Message Waiting (Single/Multiple)
General Description
Message Waiting - Single Lamp
This feature allows the Attendant Console, Hotel/Motel (H/M) Front Desk Instrument, administrative station,
Voice Mail Systems (VMS) or Property Management System (PMS) terminal to light a lamp (on an
uninterrupted or interrupted basis) on a Single Line Telephone or...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 214Addendum-008 NDA-24158, Revision 2.8
February, 1999
Message Waiting (Single/Multiple)
3. Press the RESET key.
4. The above two steps can be repeated for additional stations.
5. Press the RELEASE key.
n  To set Message Waiting while receiving ringback tone or busy tone
1. Press the MW key.
2. Press the SET key.
3. Press the RELEASE key. 
n  To cancel Message Waiting while receiving ringback tone or busy tone
1. Press the MW key.
2. Press...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.8 Addendum-008
Page 215February, 1999
Message Waiting (Single/Multiple)
Voice Message Waiting - System
n  To record
1. Lift the handset and receive dial tone.
2. Dial the Voice Message - System record access code.
3. Dial the message number (0-9) and receive service set tone for 3 seconds.
4. Record the message.
5. Restore the handset.
n  To check
1. Lift the handset and receive dial tone.
2. Dial the Voice Message Waiting...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 216Addendum-008 NDA-24158, Revision 2.8
February, 1999
Message Waiting (Single/Multiple)
n  To retrieve a message from a Multiline Terminal
1. Press the SPKR key or lift the handset and receive dial tone.
2. Press the MSG key.
3. Listen to the message.
4. Press the SPKR key or restore the handset.
Voice Message Waiting - Individual
n  To set
1. Lift the handset and receive dial tone.
2. Dial the Voice Message Waiting - Individual set...