NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 254NDA-24158, Issue 2
Proprietary Multiline Terminal
Relay Control Function Key
2. Key operation is not affected.  The call is still in progress.  
With a CENTREX call in progress, using an extension or a Trunk Direct Appearance
1. Depress the RECALL key.
2. Receive CENTREX feature dial tone.
With an internal call
1. Depress the RECALL key.
2. Receive internal dial tone.
With a Conference in progress
1. Depress the RECALL key.  The station...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 255
Proprietary Multiline Terminal
Ring Frequency Control
The associated line-key LED will go off.
The contact will open and remain open.
Service Conditions
1. A maximum of 128 contacts per system can be controlled.
2. One PN-DK00 is required for every four external items to be controlled.
3. The relay control key functions regardless of the Multiline Terminal condition (busy or idle).
4. The contact returns to the...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 255-1Addendum-005 NDA-24158, Revision 2.5
October,  1997
Proprietary Multiline Terminal
Ringing Line Pickup
Operating Procedure
With an incoming call (or recall) in progress:
1. Lift handset and the call is answered.
2. Converse.
Service Conditions
1. This feature is assigned in station Class of Service.
2. The following priority applies for answering of multiple incoming calls:
1) Voice Call.
2) Incoming call on primary extension; recalls...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.7 Addendum-007
Page 255-2August, 1998
Proprietary Multiline Terminal
Soft Keys
Soft Keys
General Description
According to the status of the Multiline Terminal, function keys (Soft Keys) are displayed in the third line on
the LCD. If the status of Multiline Terminal changes, the Soft Keys will change automatically. Also if the HELP
key is pressed, explanation of indicated Soft Keys are shown on the LCD. 
Station...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 255-3Addendum-008 NDA-24158, Revision 2.8
February, 1999
Proprietary Multiline Terminal
Soft Keys
STATUS
• Idle state
• During dialing (holding no call)
• During dialing (holding a station/trunk)
• During calling (holding no call)
• During calling (holding a station/trunk)
• Being called
• When called party is busy (holding no call)
• When called party is busy (holding a station/trunk)
• When called party sets Do Not Disturb
• Trunk busy
•...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 256Addendum-005 NDA-24158, Revision 2.5
October, 1997
Proprietary Multiline Terminal
Volume Control
Volume Control
General Description
Multiline Terminals are equipped with common Volume Control keys for:
•Built-in Speaker / Handset Receiver Volume.
•Ring Volume.
•C.O.Transmission Level.
•LCD contrast.
•Ring Tone Frequency
The Volume Control keys are located on the lower front side of Multiline Terminals (UP ­ and DOWN ¯).
Station...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 257
Proprietary Multiline Terminal
Volume Control
OR
1. When in a ringing state, depress the ­ (UP) key to increase the volume, or the ¯ (DOWN) key to decrease
the volume.
C.O. Transmission Level
•
While connected to a trunk, depress the FNC key followed by 2 or 4:
FNC key + 2 : +5 dB (receiving) /+3dB (sending)
FNC key + 4 : +5 dB (receiving) /No gain (sending)
LCD contrast
•
While in an on-hook state, depress the  ­...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 257-1Addendum-008 NDA-24158, Revision 2.8
February, 1999
Remote Hold
Remote Hold
General Description
This feature allows a Multiline Terminal user to hold it on the line button of transferred terminal, by depressing
the 
HOLD key.
Station Application
All Multiline terminals
Operating Procedure
1. Multiline Terminal-A is talking with station/trunk party.
2. Press the 
TRF key and dial the station number of Multiline Terminal-B.
a. Station...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 257-3Addendum-008 NDA-24158, Revision 2.8
February, 1999
Remote PIM
Remote PIM
General Description
When the system has two or more PIMs, the PIMs can be installed separately by T1 Digital interface. A
maximum of 3 PIMs can be installed apart at the remote site.     
Station Application
All stations
Operating Procedure
The same operating procedure as the regular NEAX2000 IVS apply for each service feature.
Service Conditions
1. The Main...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 258NDA-24158, Issue 2
Reserve Power
Reserve Power
General Description 
This feature provides backup power from a 24V battery source in the event of a commercial power failure.
Station Application
Not applicable.
Operating Procedure
No manual operation is required.
Service Conditions
1. Batteries should be installed inside the PIM or separattly from the NEAX2000 IVS system.
2. Sealed lead acid (or maintenance free) batteries must be locally...