NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 269
Route Advance
Route Advance
General Description 
This feature automatically routes outgoing calls over alternate facilities when the first choice trunk group is
busy.  Users select the first choice route by dialing the corresponding access code, and the equipment then ad-
vances through alternate trunk groups only if the first choice is busy.
Station Application
All stations.
Operating Procedure
No manual operation...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 270NDA-24158, Issue 2
Save and Repeat
Save and Repeat
General Description
This feature allows a Multiline Terminal to save a specific dialed number and then redial that number at a later
time.
Station Application
All Multiline Terminals.
Operating Procedure
1. Go off-hook and seize any idle line.  Dial a number.
2. After the number has been dialed, depress the Save and Repeat feature key.  The dialed number is stored for
future use.  The...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 271
Security Alarm
Security Alarm
General Description
This feature provides an indication on the Attendant Console when a contact closure occurs.
Station Application
Not applicable.
Operating Procedure
No manual operation is required.
Service Conditions
1. The contact to be monitored is connected across Tip (T) and Ring (R) of one circuit on a 4LC card.
2. The contact installed must be a normally open contact.
3. The...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 272NDA-24158, Issue 2
Simultaneous Voice and Data Transmission
Simultaneous Voice and Data Transmission
General Description
A voice signal and a data signal in digital format can be transmitted simultaneously. Voice and data calls can be
placed to different locations.
Station Application
All Multiline Terminals with LCD equipped for Data Communications.
Operating Procedure
To place a voice call while in data call mode
1. Lift handset and...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 273
Simultaneous Voice and Data Transmission
• Internal Multiline Terminal to Outside Line using Analog  Port Adapter (APA/APR). (Outgoing Data
call must be established before regular voice call.)
5. Refer to associated data features for more information. 

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 274NDA-24158, Issue 2
Single Digit Dialing
Single Digit Dialing
General Description
This feature provides the station user the ability to dial single digit codes to access certain features while still
allowing the same digit dialed to be used as the first digit of guest room station numbers.
Station Application
All stations.
Operating Procedure
Normal call processing procedures apply.
Service Conditions
1. This feature is available on a...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 275
Software Line Appearance (Virtual Extensions)
Software Line Appearance 
(Virtual Extensions)
General Description
This feature permits assignment of circuits which do not physically exist, to be used as secondary extensions on
Multiline Terminals.  There are 256 software lines that can be assigned to line keys and used as desired.
Station Application
All Multiline Terminals.
Operating Procedure
Normal call processing...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 276Addendum-007 NDA-24158, Revision 2.7
August, 1998
Stack Dial
Stack Dial
General Description
This feature enables a Multiline Terminal or an Attendant Console to remember the numbers dialed in the pre-
ceding five calls, including the last number dialed.  The stack dial numbers are sequentially displayed on the
LCD display, thus allowing the station user to make an outgoing call by selecting the desired dialed number from
the display....

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.7 Addendum-007
Page 277August, 1998
Stack Dial
Example
Service Conditions
1. The Stack Dial feature memorizes the numbers dialed for the last five calls (unless the same number is dialed
twice) inclusive of the last number, and allows redial using the memorized numbers.
2. For Stack Dial, station numbers and C.O. line numbers (inclusive of trunk access codes, routes, route ad-
vance, and Least Cost Routing) are memorized...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 278NDA-24158, Issue 2
Stack Dial
5. When the lower line of the LCD is being used by Data Communication/OAI, Stack Dial is not available.
6. The maximum number of digits that can be memorized by Stack Dial is 32.  The number of digits to be dis-
played on the LCD ranges from 1 to 16.
7. When only one number is registered by Stack Dial, BLANK is displayed on the lower line of the LCD when
the LNR/SPD key is pressed.  If redial is attempted...