Home > NEC > Communications System > NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

Here you can view all the pages of manual NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 351

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 296NDA-24158, Issue 2
Timed Queue
Timed Queue
General Description
When a user originates an outgoing trunk call and the called party is busy or does not answer, the caller can set
the Timed Queue feature.  When this feature is set, the trunk seizure is repeated and the number is redialed after
a predetermined time interval.
Station Application
Multiline Terminals.
Operating Procedure
1. Depress the SPKR key and receive dial tone.
2. Dial a...

Page 352

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 297
Timed Reminder
Timed Reminder
General Description
This feature allows the system to be programmed to automatically call stations at specified times.  Upon answer-
ing, the station is connected to a recorded announcement or music source.
Station Application
All stations.
Operating Procedure
To set Timed Reminder
1. Go off-hook and receive dial tone from the primary extension.
2. Dial the Timed Reminder feature access...

Page 353

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 298NDA-24158, Issue 2
Timed Reminder
8. The number of Timed Reminder attempts is programmable in system data from 1 to 5 times, when the called
station does not answer. 
9. If the station does not answer, is busy, in Line Lockout, or ringing, recalling is initiated 1 minute later.
When each call results in failure, it is printed out at the printer.  Additionally, when the final attempt results
in failure, a buzzer is sounded at the...

Page 354

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.6 Addendum-006
Page 299November, 1997
Trunk - Direct Appearances
Trunk - Direct Appearances
General Description
This feature allows Multiline Terminal users the ability to access a CO line or E&M Tie Line without dialing
an access code. For this feature, trunks must be assigned to the line keys on the Multiline Terminal. Incoming
calls on CO lines can be answered on the appropriate trunk line appearance.
Station...

Page 355

Trunk - Direct Appearances
NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 299-1Addendum-006 NDA-24158, Revision 2.6
November, 1997
Service Conditions
1. The ETJ-16DC-1 has 15 available line keys which can be assigned as Trunk-Direct Appearances. The ETJ-
8-1 has 7 available line keys which can be assigned as Trunk-Direct Appearances.
2. The following features are available:
• Outgoing call connection restriction • Code Restriction
• Conference • Delayed Ringing
• Station Message Detail...

Page 356

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 300NDA-24158, Issue 2
Trunk Queueing - Outgoing
Trunk Queueing - Outgoing
General Description
This allows a station user, upon encountering a busy signal on a trunk, to dial a feature access code and enter a
first-in, first-out queue.  As soon as an outgoing trunk becomes available, stations in the queue will be called
back on a first-in, first-out basis.
Station Application
All stations.
Operating Procedure
Single Line Telephones
n  When...

Page 357

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 301
Trunk Queueing - Outgoing
5. When the trunk becomes idle, the station is recalled.  Once connected to the trunk, the system will automat-
ically redial the number.
Service Conditions
1. Once an outgoing trunk becomes available, the users station will ring for 30 seconds.  If not answered with-
in that time, the station is automatically dropped from the queue.
2. When this feature is utilized in conjunction with...

Page 358

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 302NDA-24158, Issue 2
Trunk-to-Trunk Connection
Trunk-to-Trunk Connection
General Description
This feature provides any station user with the ability to conference together two outside trunk calls and abandon
the connection without dropping the Trunk-to-Trunk Connection.
Station Application
All stations.
Operating Procedure
To establish a Trunk-to-Trunk Connection from a Single Line Telephone
1. Depress the FLASH key (or momentarily...

Page 359

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.1 Addendum-001
Page 303February, 1996
Trunk-to-Trunk Connection
4. If an originating Single Line Telephone encounters a busy or no answer condition after dialing out to Con-
ference a third party, the originating party can be reconnected to held caller by providing a hookflash or by
depressing the FLASH key to establish a Conference, and a second hookflash to release the last party called.
5. If an originating Single Line...

Page 360

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 304NDA-24158, Issue 2
Uniform Call Distribution (UCD)
Uniform Call Distribution (UCD)
General Description
The Uniform Call Distribution (UCD) feature permits incoming calls to terminate to a prearranged group of sta-
tions.  Calls  are distributed in the order of arrival to idle terminals within  the group, based on which terminal
has been idle the longest period of time.  Stations may log on/log off from the UCD group.  Supervisor...
Start reading NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

Related Manuals for NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

All NEC manuals