NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 286NDA-24158, Issue 2
Step Call
Step Call
General Description
This feature allows the Attendant or station user, after calling a busy station, to call an idle station by simply
dialing an additional digit.  This feature will operate only if the number of the idle station is identical to that of
the busy station in all respects, except the last digit.
Station Application
All stations.
Operating Procedure
To operate:
1. The dialed station...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 287
Supervisory Control of Peripheral Equipment
Supervisory Control of Peripheral 
Equipment
General Description
When various types of peripheral equipment (such as facsimiles, dictation equipment, Voice Mail, etc.) are con-
nected to the line circuits of the NEAX2000 IVS, this feature allows the loop of the line circuit concerned to
open for a programmable interval, and send a release signal to the peripheral equipment...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 288NDA-24158, Issue 2
Synchronous Data Switching
Synchronous Data Switching
General Description
Synchronous data terminals can place switched data calls if both terminals are equipped with Synchronous Data
Adapters.
Station Application
All Multiline Terminals with LCD equipped for Data Communications.
Operating Procedure
Internal connection between two Multiline Terminal Synchronous Data Adapters
To originate a call from a Multiline...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 289
Synchronous Data Switching
4. The following shows the maximum data speed in synchronous transmission
• PROTIMS (NECs unique): 2.4k/4.8k/9.6kbps
• V.110 (CCITTs): 2.4k/4.8k/9.6k/19.2kbps
5. The system provides a transparent data connection (no speed or code conversion) between terminals. If de-
vices do not work when directly connected to each other, they will not work when connected using the
NEAX2000 IVS.
6. The...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 290NDA-24158, Issue 2
System Speed Dialing
System Speed Dialing
General Description
This feature provides all users the ability to dial frequently called numbers using an abbreviated call code.
Station Application
All stations.
Operating Procedure
Multiline Terminals
To initiate a call:
1. Depress the SPKR key or lift the handset and receive extension dial tone.
2. Depress the System Speed Dialing access feature key (one touch key) or dial...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 291
System Speed Dialing
8. When Station Message Detail Recording (SMDR) is provided, the actual dialed number is recorded and
printed.
9. If the NEAX2000 IVS  is designated as KF registration, this feature will not be available.
10. System Speed dialing cannot be used on Trunk Direct Appearances.  

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 292NDA-24158, Issue 2
Tenant Service
Tenant Service
General Description
This feature provides for more than one organization (tenant) to share the same NEAX2000 IVS system.
Through system programming, each organization may be restricted to its own Central Office trunks, Attendant
Consoles and extension group.  In addition, incoming calls are directed to the specific tenant.  
Station Application
Not applicable.
Operating Procedure
No...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 293
Terminal Attribute Data Assignment
Terminal Attribute Data Assignment
General Description
This feature provides a Multiline Terminal equipped with a data adapter the ability to assign or change its own
terminal attributes. Attributes such as auto answer, baud rate, and half/full duplex operation can be changed.
This ability provides the user with the flexibility to adapt to various data communication needs.
Station...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 294NDA-24158, Issue 2
Tie Lines
Tie Lines
General Description
This feature allows any station user dial access or direct access to an E&M Tie Line.
Station Application
All stations.
Operating Procedure
To dial access an E&M Tie Line
1. Lift handset and receive dial tone.
2. Dial E&M Tie Line access code.
3. Dial desired number.
To directly access an E&M Tie Line
1. Lift handset or depress SPKR key and receive dial tone.
2. Depress line key...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 295
Tie Line Tandem Switching
Tie Line Tandem Switching
General Description
This feature allows trunk-to-trunk connections through the NEAX2000 IVS without the need for any Attendant
assistance or control.  The major use of this feature is in association with a dial tandem tie line network to allow
tie line connections and incoming tie line calls automatic access to, and completion of, local Central Office calls.
Station...