Home > NEC > Communications System > NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

Here you can view all the pages of manual NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 221

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 178NDA-24158, Issue 2
Intercept Announcement
Intercept Announcement
General Description
This feature provides the automatic interception of Direct Inward Dialing (DID) and Tie Line calls which cannot
be completed due to unassigned station or level.  The caller hears a recorded Intercept Announcement which
informs the caller that an inoperative number was reached, and may supply the number for information.
Station Application
Not...

Page 222

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 179
Intercom
Manual Intercom
Intercom
General Description
Three types of Intercoms are available: Manual Intercom, Automatic Intercom, and Dial Intercom.  Each type
of Intercom provides access to a small group of Multiline Terminals with simplified calling methods.
 Manual Intercom
General Description
The Manual Intercom groups have up to six Multiline Terminals sharing a common signal path.  Users can call
other members...

Page 223

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 180NDA-24158, Issue 2
Intercom
Automatic Intercom
 Automatic Intercom
General Description
Automatic Intercom provides a path for Voice Announcement Calls with Handsfree Answerback between two
Multiline Terminals using a line key.  Private conversations can be held by using the Multiline Terminal hand-
sets.  The Busy/Idle status of the associated Multiline Terminal is displayed on the Automatic Intercom line key
LED. 
Station Application...

Page 224

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.4 Addendum-004
Page 181April, 1997
Intercom
Dial Intercom
Operating Procedure
1. The caller lifts the handset, presses the Dial Intercom key, and receives dial tone.
2. The caller dials the one-digit Intercom code of the called Multiline Terminal (0-9).
3. The called terminal receives a tone burst followed by Voice Announcement and can answer using Handsfree
Answerback. 
OR
1. The caller can dial 1 to change the call to a...

Page 225

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 182NDA-24158, Issue 2
Internal Tone/Voice Signalling
Internal Tone/Voice Signalling
General Description
Multiline Terminals can signal incoming internal calls by Voice Announcement or by ringing according to the
programmed mode (Voice first or Ring first) of the called terminal.  The caller can dial the digit 1 to change
from Voice Announcement to Ring Tone or vice versa.
The Multiline Terminal assigned this feature can program the...

Page 226

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 183
Internal Tone/Voice Signalling
4. Press the SPKR key.
Service Conditions
1. When a Multiline Terminal is receiving a Voice Announcement, it cannot receive any other audible signal. 
2. Single-digit feature access codes must be allowed in system programming.
3. Voice Announce service on extension lines can be allowed or denied on a system basis.
4. Microphone control MIC lamp must be lit for Handsfree Answerback...

Page 227

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 184NDA-24158, Issue 2
Internal Zone Paging with Meet-Me
Internal Zone Paging with Meet-Me
General Description
This feature allows the Attendant Console and system users to page over the built-in speakers of the Multiline
Terminals within the assigned zone or all zones.
Station Application
All stations.
Operating Procedure
To page from a Multiline Terminal or a Single-Line Telephone
1. Lift the handset and receive extension dial tone.
2....

Page 228

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 185
Keyboard Dialing - Data Adapter
Keyboard Dialing - Data Adapter
General Description
This feature provides Data Terminal Equipment (DTE) with the ability to originate a call using the keyboard of
the DTE or by sending a command character set from the DTE. The user may also originate a voice call at the
same time. The voice and data call can be placed to two different locations.
Station Application
All Multiline...

Page 229

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 186NDA-24158, Issue 2
Keyboard Dialing - Data Adapter
3. The data connection is now released.
Service Conditions
1. Only Multiline Terminals with LCD equipped with a Data Adapter can use Keyboard Dialing.
2. When data communication is established using the keypad, the dialed number will be indicated on the LCD,
but there will be no indication on the DTE. When data communication is established using Keyboard Dial-
ing, the dialed number...

Page 230

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 187
Last Number Redial
Last  Number  Redial
General Description
This feature allows users to redial the last station-to-station or outside number they dialed using a feature access
key or a feature access code.  This is useful when the called station is busy or does not answer.
Station Application
All stations and Attendant Consoles.
Operating Procedure
From a Multiline Terminal
1. Go off-hook and receive dial tone.
2....
Start reading NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

Related Manuals for NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

All NEC manuals