NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 113
Consecutive Speed Dialing
Consecutive  Speed Dialing
General Description
For Speed Dialing, all digits are registered as a Speed Dialing Code.  In the case of Consecutive Speed Dialing,
the common portion of the number is registered as a speed calling code, and the remaining digits of each number
are dialed by each individual calling station or by using a Station Speed Dial key on a Multiline Terminal.
Example:
9 1 5...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 114NDA-24158, Issue 2
Consultation Hold
Consultation  Hold
General Description
This feature permits a station user to hold any incoming or outgoing CO call, tie line call, or any intraoffice call
while originating a call to another station user within the system.
Station Application
All stations.
Operating Procedure
From a Multiline Terminal
n  To hold the original call and place a second call
1. Depress the TRF key and receive feature...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 115
Consultation Hold
3. If the originating station depresses the FLASH key (or momentarily depresses the hookswitch), a three-party
Conference will be initiated.
Service Conditions
1. An outgoing exchange network or tie line call can also be made by the station user with a call on Consulta-
tion Hold.  Refer to Trunk- to-Trunk Connection and Conference Features and Specifications.
2. A station is only allowed to place...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 116NDA-24158, Issue 2
Customer Administration Terminal (CAT)
Customer  Administration  Terminal  (CAT)
General Description
In addition to the Maintenance Administration Terminal (MAT), programming of the NEAX2000 IVS can be
done from selected Multiline Terminals with LCD.  The designated Multiline Terminals can be placed in pro-
gram mode, and system data can then be changed.  To prevent unauthorized changes, password levels are as-...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 117
Data Hotline
Data Hotline
General Description
This feature allows a Data Terminal Equipment (DTE) user to call a predetermined number for an internal data
connection, immediately upon selection of the DATA key.
Through programming, the Data Hotline can be selected by either turning on the DTR (Data Terminal Ready)
signal from the DTE or by pressing the DATA key on the Multiline Terminal, or by sending a specific code...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 118NDA-24158, Issue 2
Data Hotline
5. Terminal Attribute Data Assignment cannot be displayed or changed by the Multiline Terminal on a Data
Hotline. Attribute data can only be assigned from the Maintenance Administration Terminal (MAT) or Cus-
tomer Administration Terminal (CAT).
6. According to the state of the called DTE or station, the following indications are displayed on the calling
Hotline station.
7. Data Hotline to an internal...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 119
Data Hunting
Data Hunting
General Description
This feature provides hunt groups of data extensions for applications requiring termination to a data facility.
This provides access to multiple input/output connections on a mainframe.
Station Application
All Multiline Terminals with LCD equipped for Data Communications.
Operating Procedure
To initiate Data Hunting:
1. Press the DATA key. The LCD displays DTE XXXX. The...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 120NDA-24158, Issue 2
Data Interface - Automatic Answer
Data Interface - Automatic Answer
General Description 
This feature permits all incoming data calls to be answered automatically by the Data Adapter.
Automatic Answer can be set by a switch and data setting on the Hayes
® (Async)/V.25bis (Async/Sync) Data
Adaptor, the Maintenance Administration Terminal (MAT) or Customer Administration Terminal (CAT) using
Terminal Attribute Data...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 121
Data Line Security
Data Line Security
General Description
This feature allows line circuits which are used for data transmission to be protected from interruptions such as
Attendant Camp-On, Executive Override, and Attendant Override.
Station Application
Not applicable.
Operating Procedure:
No manual operation is required.
Service Conditions
1. This feature is assigned in system programming on a per-station basis.
2....

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 122NDA-24158, Issue 2
Delayed Ringing
Delayed Ringing
General Description
This feature enables trunks and station lines to ring immediately at the terminating station, but also, after a pro-
grammable period of time has elapsed, to ring at secondary Multiline Terminals with that trunk or line appear-
ance.
Station Application
All Multiline Terminals.
Operating Procedure
No manual operation is required.
Service Conditions
1. Delayed Ringing...