NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 98NDA-24158, Issue 2
Call Transfer
Call Transfer - Attendant
• three stations
• two stations and one trunk
• one station and two trunks.
4. A four-party Conference can be accessed from the Call Transfer state by Multiline Terminals only.  When
the Consultation Hold of a three-party Conference connection is followed by calling another internal station,
a four-way connection can be initiated.  Refer to the Conference (Three/Four party)...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.2 Addendum-002
Page 98-1March, 1996
Caller ID Class
Caller ID Class
General Description
This feature receives the calling subscriber’s name and number sent from a public network using a MODEM
signal and displays the name or number on a LCD of a Multiline Terminal and an Attendant Console.
Station Application
All Multiline Terminals with a LCD and Attendant Consoles.
Operating Procedure
To display the calling subscriber’s...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 98-2Addendum-002 NDA-24158, Revision 2.2
March, 1996
Caller ID Class
Service Conditions
1. Up to 14 digits of the calling subscriber’s name or number can be displayed on the LCD of a Multiline Ter-
minal or an Attendant Console.
2. Up to 16 digits of the calling subscriber’s number can be recorded on the SMDR.
3. Up to 24 digits of the calling subscriber’s number can be sent to the OAI computer.
4. The 4RSTC card and the 4COTG card are...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.8 Addendum-008
Page 98-3February, 1999
Caller ID Display
Caller ID Display
General Description
Without answering incoming calls or held calls which terminate to the line keys of a Multiline Terminal, the
calling party’s information can be confirmed by the indications on the LCD. The following information is
indicated according to the kind of the calls.
When a station is in conversation and the CID display key is pressed,...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 98-4Addendum-008 NDA-24158, Revision 2.8
February, 1999
Caller ID Display
2. If there are plural incoming calls or held calls, press the desired line key while the CID key lamp lights. 
The LCD displays the calling party’s information of the incoming/held call for six seconds.
If the line key which is pressed while CID mode has no incoming/held call, CID mode is cancelled.
3. When the CID key is pressed again in CID mode, the CID key lamp...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 99
Camp-on
Camp-on
General Description
This feature provides selected stations or outside calls with Camp-On capability to a busy internal station.  Two
Camp-On methods are provided.  The call waiting method allows a station or an outside party to camp itself on
to a busy station.  The transfer method allows a transferred outside call to be camped-on to a busy station.
Station Application
All stations.
Operating...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 100NDA-24158, Issue 2
Camp-on
2. Dial the desired station number and receive busy tone.
3. Depress the TRF key.  Feature dial tone is received.
4. Dial the Camp-On (transfer) feature access code and receive service set tone.  Camp-On tone (two tone
bursts) is sent to the busy station.
5. Restore the handset.
To answer a Camp-On (transfer method or Call Waiting method) from any station
1. Receive Camp-On tone.
2. From a Single Line...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 101
Camp-on
9. Camp-On can only be set if the called station is on a two-party call.  Camp-On is denied if the busy station
is dialing or in Line Lockout, receiving a system generated tone, protected against any override by DND
key, a Data Station currently has a Camped-On call or if any of the following features are activated on the
busy station:
• Attendant Override • Conference • Executive Override
• Attendant Camp-On...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 102NDA-24158, Issue 2
Centrex Compatibility
Centrex Compatibility
General Description
A combination of features allow full integration of the NEAX2000 IVS with Centrex service.
Station Application
All stations.
Operating Procedure
Refer to associated features.
Service Conditions
1. Flexible Configuration:
• Universal Ports to meet high trunk-to-station ratio.
• Building block approach for modular growth.
• Flexible Line Assignment.
• Wide...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 103
Centrex Compatibility
13.  Function keys at Multiline Terminals for easy access to Centrex features.
14. Automatic pause after Centrex access code.
15. Listed directory numbers display at Attendant Console.
16. Uniform Call Distribution (UCD) for quick and efficient handling of incoming calls.
17. Recall key provides timed hookflash to Centrex for feature access.
18. Prime line Assignment to Centrex line (when using...