NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 54Addendum-008 NDA-24158, Revision 2.8
February, 1999
Automatic Call Distribution (ACD)
Silent Monitor - ACD
2. The default setting in system programming is that one tone is sent to both parties when the monitoring
feature is used. As an option, this tone may be disabled on a per system basis.
3. Silent Monitor feature uses a three-party conference circuit. Therefore, a maximum of 16 monitors can
occur simultaneously in conjunction with...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 55
Automatic Call Distribution (ACD) with Management Information System (MIS)
Automatic Call Distribution (ACD) with 
Management Information System (MIS)
General Description
The Automatic Call Distribution (ACD) with MIS feature provides a management information system to be
used in conjunction with the built-in ACD features of the NEAX2000 IVS system. The MIS incorporates a su-
pervisors terminal for real-time...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 56NDA-24158, Issue 2
Automatic Camp-on
Automatic Camp-on
General Description
An incoming Direct Inward Termination (DIT) call which has been terminated to a busy station can be Camped-
On automatically. When the busy station becomes idle, the station is automatically called and connected to the
camped on incoming trunk call.
Station Application
All stations.
Operating Procedure
No manual operation is required.
Service Conditions
1. Two...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 57
Automatic Number Identification (ANI)
Automatic Number Identification (ANI)
General Description
This feature receives the calling subscribers number automatically sent from T1 network using MF signaling
and displays the calling number on the LCD of a Multiline Terminal and an Attendant Console.
Station Application
All Multiline Terminals with LCD and Attendant Consoles.
Operating Procedure
No manual operation is...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 58NDA-24158, Issue 2
Automatic Recall
Automatic Recall
General Description
This feature works as a timed reminder. When a call remains on Hold, Camp-On or ringing unanswered for a
fixed interval after being transferred, the station that initiated the hold, transfer, or Camp-On is automatically
alerted.
Station Application
All stations.
Operating Procedure
No manual operation is required.
Service Conditions
1. Automatic Recall timing is...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 59
Automatic Recall
7. This feature is not activated when a Multiline Terminal holds the call on Nonexclusive or Exclusive Hold
during a three or four-party Conference. The conference members do not receive hold music, but can con-
tinue talking.
8. Automatic Recall will follow any Call Forwarding assignment. 

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 60NDA-24158, Issue 2
Automatic Wake-up
Automatic Wake-up
General Description
This feature allows the system to be programmed to automatically call guest rooms or administration stations at
specified times. Upon answering, the guest is connected to a recorded announcement or music source. A printout
of unanswered or blocked Automatic Wake-Up attempts for each guest room is provided using the Hotel/Motel
printer.
Station Application
All...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 61
Automatic Wake-up
To cancel Automatic Wake-Up from the Hotel/ Motel Front Desk Instrument wile engaged in conversation 
with station
1. Depress the WK UP key.
2. Depress the RESET key.
3. Depress the RLS key.
To set Automatic Wake-Up from a guest room station or administrative station
1. Go off-hook and receive dial tone.
2. Dial the Wake-Up access code and receive feature dial tone.
3. Dial the desired Wake-Up time...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 62NDA-24158, Issue 2
Automatic Wake-up
10. The number of Automatic Wake-Up call attempts is programmable from 1 to 5 times.
11. If the station does not answer, is busy, in Line Lockout, or ringing, recalling is initiated one minute later.
Recalling is repeated up to 5 times. Each call which fails is printed. When the final attempt results in failure,
a buzzer is sounded at the printer and a flashing LED on the DSS/BLF Console is available...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.5 Addendum-005
Page 62-1October, 1997
Back Up CPU
Back Up CPU 
General Description
NEAX2000 IVS can provide two MP cards (MP0/MP1). One of these MP cards (MP0) functions as the active
MP card and another (MP1) as the standby; however, if MP0 becomes out of order for any reason, MP1 starts
up automatically.
Station Application
All stations
Operating Procedure
The same operating procedures as the regular NEAX2000 IVS apply...