NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 16NDA-24158, Issue 2
Attendant Assisted Calling
Attendant Assisted Calling
General Description
This feature allows a station user to ask an Attendant for assistance in originating a call. Three methods are
available: non-delay, delay, and passing dial tone.
Station Application
All stations.
Operating Procedure
Non-delay operation
1. The Attendant answers an operator call by depressing the ANSWER or ATND key.
2. The caller provides a call...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 17
Attendant Assisted Calling
Service Conditions
1. During delay operation the Attendant may release the connection either before or after the called station an-
swers.
2. If the call was processed using non-delay or passing dial tone operation, there will not be an Automatic Re-
call for station-to-trunk calls when the called party does not answer.
3. If the call was processed using non-delay or passing dial tone...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 18NDA-24158, Issue 2
Attendant Camp-on
Attendant Camp-on
General Description
This feature permits the Attendant to hold an incoming call in a special mode when the desired station for the
transfer is busy. The Attendant sends a Camp-On tone to the busy station. When that station becomes idle, it is
automatically alerted and connected to the waiting party.
Station Application
Attendant Consoles
Operating Procedure
To activate a Camp-On from...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 19
Attendant Camp-on
3. Dial the Call Hold feature access code. The original call is placed on Call Hold and the station user is auto-
matically connected to the Camp-On call.
n  From a Multiline Terminal
1. Receive a Camp-On tone.
2. Hang up and receive incoming ring.
3. Lift the handset and converse.
OR
1. Receive a Camp-On tone.
2. Depress the ANSWER key. The call in progress is placed on Call Hold and the Camp-On...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 20Addendum-006 NDA-24158, Revision 2.6
November, 1997
Attendant Console (SN610 ATTCON)
Attendant Console (SN610 ATTCON)
General Description
The Attendant Console (SN610 ATTCON) operates on a switched-loop basis with a maximum of 6 Attendant
loops terminating at each console on the associated interface card. The Attendant uses these loops for answering,
originating, holding, extending, and re-entering calls. When Attendant loop release is...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.7 Addendum-007
Page 20-1August, 1998
Attendant Console (SN716 DESKCON)
Attendant Console (SN716 DESKCON)
General Description
The Attendant Console (SN716 DESKCON) operates on a switched-loop basis with a maximum of 6 Attendant
loops terminating at each console on the associated Interface card. The Attendant uses these loops for answering,
originating, holding, extending, and re-entering calls. When Attendant loop release...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 20-2Addendum-006 NDA-24158, Revision 2.6
November, 1997
Attendant Console (SN610 ATTCON)
Attendant Called/Calling Name Display
Attendant Called/Calling Name Display
General Description
This feature provides a display of the calling/called partys name on the SN610 Attendant Console LCD for At-
tendant Called/Calling Name Display. On attendant-to-station calls, the LCD display the name assigned to the
primary extension of the station. On...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Revision 2.6 Addendum-006
Page 21November, 1997
Attendant Console (SN610 ATTCON)
Attendant Called/Calling Number
Attendant Called/Calling Number
General Description
This feature provides a display of the station number and station name on the Attendant Console during an At-
tendant-to-station connection. During an Attendant-to-trunk connection, the same display shows the trunk route
designation and a trunk identification code (4...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 22NDA-24158, Issue 2
Attendant Console (SN610 ATTCON)
Attendant Call Selection
Attendant Call Selection
General Description
This feature allows assignment of keys on the Attendant Console to particular types of trunk routes (such as
WATS or FX) and particular types of service calls (such as Attendant recalls, intercept calls, etc.). LEDs indicate
the type of incoming call and pressing the associated key allows the Attendant to answer the...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 23
Attendant Console (SN610 ATTCON)
Attendant Do Not Disturb Setup And Cancel
2. Dial the feature access code or press the MODE key. The associated red LED lights. The LCD displays
“ACTIVE” during normal mode and the green LED of the ACTIVE key lights.
3. Press the LKOUT key. The associated red LED lights. The LCD display changes from “ACTIVE” to “LK-
OUT”.
4. Press the ANSWER key and receive service set tone. The LCD...