NEC Neax 2000 Ivs Business/Hotel/Data Features And Specifications

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 24NDA-24158, Issue 2
Attendant Console (SN610 ATTCON)
Attendant Interposition Calling / Transfer
Operating Procedure
To set an individual station in DND
1. Dial the station number without pressing the LOOP key.
2. Press the DD key and the associated LED flashes.
3. Press the ANS key (or START key). The DD LED lights steady and service set tone is received.
4. Press the RELEASE key.
To cancel an individual station in DND
1. Dial the station...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 25
Attendant Console (SN610 ATTCON)
Attendant Lamp Check
Operating Procedure
To call from console A to console B
1. Attendant A presses an idle loop key.
2. Attendant A dials the Interposition Calling/Transfer access code and Attendant Bs identification number.
3. The call is indicated at console B (on the ANS key or TF key).
4. Attendant B presses the ANS key or TF key.
5. Attendant A converses with Attendant B.
6....

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 26NDA-24158, Issue 2
Attendant Console (SN610 ATTCON)
Attendant Listed Directory Number
4. The following message is displayed on the LCD of the Attendant Console, and the console is placed into
the Lamp Check Mode.
To check the status of all the keys, the buzzer sound, and the LEDs, press each key in turn to check the key
itself, as well as to check the corresponding LED, buzzer sound, and LCD on the console. For details on the
procedures,...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 27
Attendant Console (SN610 ATTCON)
Attendant Loop Release
Attendant Loop Release
General Description
This feature allows an Attendant Console loop to become available for a second call as soon as the Attendant
has directed the first call to a station, even if that station does not answer.
Operating Procedure
To operate
1. The Attendant Console indicates incoming calls.
2. Press the ANSWER or appropriate Attendant Call...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 28NDA-24158, Issue 2
Attendant Console (SN610 ATTCON)
Attendant Programming
Attendant Programming
General Description
This function is allowed only for the Attendant Console (SN610) and is used to execute DISA code set up, speed
dial programming, and system clock set up operations.
Station Application
Not Applicable.
Operating Procedure
The following operations are common for DISA code set up, speed dial programming, and system clock set...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 29
Attendant Console (SN610 ATTCON)
Attendant Programming
5. If there is no change skip to step 6, otherwise dial the new trunk restriction class (1 digit).
6. Press the ANS key.
The new code and classes are set up.
7. Press the CNCL key.
To set up another block number, return to step 2.
8. Press the CNCL key.
The system goes back to the status assumed after the password was set up.
To program system speed dialing
1....

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 30NDA-24158, Issue 2
Attendant Console (SN610 ATTCON)
Attendant Training Jacks
SS: Second (00~59)
3. Press the ANS key.
The new date and time are set up.
4. Press the CNCL key.
The system goes back to the status assumed after the password was entered.
Service Conditions
1. A feature access code can be assigned and dialed instead of using the PROG key.
2. The PROG key must be assigned to any of the upper 6 keys of the new Attendant...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 31
Attendant Console (SN610 ATTCON)
Call Processing Indication
Call Processing Indication
General Description
This feature provides visual indications of all calls being processed or awaiting processing at the Attendant Con-
sole.
Operating Procedure
No manual operation is required.
Service Conditions
1. Each Attendant Console is provided with 6 dedicated switching loop keys. Each loop key is associated with
an LED to...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
Page 32NDA-24158, Issue 2
Attendant Console (SN610 ATTCON)
Call Splitting
6. When the system is changed from day to night mode, calls already waiting in the queue will remain in the
same queue and can be answered by the Attendant Console.
7. Calls in queue can overflow to Night Service. Refer to Attendant Overflow Features and Specifications for
more information.
Call Splitting
General Description
This feature allows the Attendant to confer...

NEAX2000 IVS Business/Hotel/Data Features and Specifications
NDA-24158, Issue 2
Page 33
Attendant Console (SN610 ATTCON)
Call Waiting Display
4. Call Splitting is manual when the SRC, DEST, or TALK key is pressed on the Attendant Console.
Call Waiting Display
General Description
This feature provides a visual indication to the Attendant when one or more calls are waiting to be answered.
Operating Procedure
No manual operation is required.
Service Conditions
1. When there are any incoming calls to the...