NEC EliteMail Vms/Elitemail Limited Technician Guide

3 - 2Using Remote Maintenance Issue 3 EliteMail VMS/EliteMail Limited
SECTION 3 
A
CCESS REMOTE 
M
AINTENANCE MENUSRemote Maintenance is a terminate-and-stay resident (TSR) program,
meaning it remains loaded in your computer memory while you use DOS
or run other applications.  Press 
	
-

 to access the Remote
Maintenance Main Menu. The Main Menu includes several submenus that
are described below.

You must press Shift key on the 
left side of the keyboard.
To select from the Main Menu or...

EliteMail VMS/EliteMail LimitedIssue 3
Console Maintenance3 - 3
5.2 Call a Host Computer from the Call Menu
1. From the Main Menu, press 
 to access the Call Menu.
2. Highlight the Phone Book entry you wish to call.  Use the
arrow keys to move from name to name.
3. Press 
! to start dialing.  A pop-up is displayed, identifying
both the host and the calling parameters in use (
e.g., COM
port and baud rate).  Note the 
Dialing! message displayed at
the bottom of the screen.
4. Wait 5 to 10 seconds for...

3 - 4Using Remote Maintenance Issue 3 EliteMail VMS/EliteMail Limited
SECTION 7 
A
CCESS MENUS 
D
URING CONNECTIONTo access other menus during connection:
1. Press 
	
-

 to access the Remote Maintenance Main Menu
anytime during a connection just as you did to access from DOS.
This allows you to access various functions, such as the File Menu to
transfer the host computer REPLOG file to your computer.  The
program running on the host computer is not affected and operates
normally.
2. When you...

EliteMail VMS/EliteMail LimitedIssue 3
Console Maintenance3 - 5
SECTION 9 
U
NLOAD REMOTE 
M
AINTENANCE FROM 
M
EMORY9.1 Remote Maintenance
Remote Maintenance is a terminate-and-stay resident (TSR)
program. TSR programs remain in the computer memory while you
use DOS or run other applications.  The following procedure
unloads Remote Maintenance only.  It does not unload other TSR
programs.
9.2 Unload Remote Maintenance from the Remote Computer
Memory
1. Verify that you are at the DOS prompt in the...

Console Maintenance4 - 1
Transferring Files
 
SECTION 1 
G
ENERAL 
I
NFORMATIONRemote Maintenance allows you to transfer files from the host computer to the
remote computer, including the call report log file (REPLOG
 file). Related file
transfer features let you change the current directory, view, delete, rename, or
copy files, or print a file from the host computer on a printer attached to the
remote computer.
SECTION 2 
P
REPARE FOR FILE 
T
RANSFERMany functions are available from the Remote...

4 - 2Transferring Files Issue 3 EliteMail VMS/EliteMail Limited
Set File Transfer Options
1. From the Main Menu, press 
 to select the Files option.
2. Press 
 to select the File Menu expanded menu.
3. Press 
% to select Options.
4. To reset an option at the Options Menu, highlight it, then
press 
 .  Settings toggle between ON and OFF.
Leave the File Compression option OFF (default).
5. Press 
! to save entries and exit to the File Menu.
2.2 The File Menu Screen
Figure 4-1 File Menu...

EliteMail VMS/EliteMail LimitedIssue 3
Console Maintenance4 - 3
File Lists
The File Menu Screen has two separate windows. The left window
lists files and directories on the local computer (where you are).
The right window lists files and directories on the host you are
connected to by modem.  The directory you are in is listed at the
top of each window.  To move between the two windows, press the
left or right arrow key.  The other elements of the File Menu Screen
(from top to bottom of the screen) are:...

4 - 4Transferring Files Issue 3 EliteMail VMS/EliteMail Limited
Functions Line
The bottom of the screen lists the functions available at this
window by function key and abbreviated name.  These may vary
slightly depending on whether the highlight bar is in the local or
host window.
Tagging Files
You can select the files you want to transfer, view, copy, or delete
by tagging (marking) them.  Files can be tagged individually by
using the arrow keys or grouped using the DOS wildcard
characters.
Tag or Untag...

EliteMail VMS/EliteMail LimitedIssue 3
Console Maintenance4 - 5
Figure 4-2    Expanded File Menu
Tag or untag a group of files:
1. Press right or left arrow to move the highlight bar to the
correct window on the File Menu Screen. 
2. Press 
 to display the expanded File Menu.
3. Press 
! to Tag File
(s
) or press 
 to Untag File
(s
). 
4. Enter the name of the file or files, using the wildcard
characters (*
 or ?
) and press 

.
SECTION 3 
T
RANSFER FILES 
B
ETWEEN HOST AND 
R
EMOTE...

4 - 6Transferring Files Issue 3 EliteMail VMS/EliteMail Limited
2. To move between windows, press 
& to move the highlight
bar to the right window or press 
 to move to the left
window.
Placement of the highlight bar designates which window is
active. The active window is the source from which files
transfer.  The other window is automatically the destination.
3. To move through the directory list(s), use the following keys: 
4. To change directories, perform either procedure below:

Move the highlight...