NEC EliteMail Vms/Elitemail Limited Technician Guide

EliteMail VMS/EliteMail Limited Issue 3
Hardware Specifications2 - 5
SECTION 5  
I
NSTALL MODEM 
K
IT UNIT The Modem Kit Unit provides remote connection.  To install the Modem Kit
Unit refer to Figure 2-3 Install Modem Kit Unit.  The VMS(  )-U10 ETU is
shown, but the Modem Kit Unit can also be installed in connectors J2 and
J3 on the FMS(  )-U10 ETU.
1. Verify that the HDD LED on the VMS/FMS( )-U10 ETU is off.
2. Verify that the BCLR LED is green.
3. Turn off the MB (Make Busy) Switch and verify that MB...

Issue 3 EliteMail VMS/EliteMail Limited
2 - 6Installation
Figure 2-3   Install Modem Kit Unit 

Programmingi
Table of Contents
Section 1 Overview ............................................................................................... 1-1
Enter Programming Mode .................................................................................  1-1
Assign Function Keys ........................................................................................  1-1
Assign Voice Mail Parameters...........................................................................  1-2
Live Record Parameters...

Programmingiii
List of Figures
Figure 1-1  VMS( )-U10 ETU ...........................................................................................................  1-7
Figure 1-2  FMS(  )-U10 ETU ..........................................................................................................  1-9 

Programming1 - 1
Programming
 	
SECTION 1 
O
VERVIEWThe VMS ETU is recognized by the Electra Elite system as having four or
eight digital voice mail (DVM) ports; therefore, make all assignments
required for DVM.  

The FMS(  )-U10 ETU has only four ports
1. Install VMS/FMS( )-U10 ETU.
2. Program the telephone system to support digital voice mail (DVM).
Enter Programming Mode
1. From Port 01 or 02, 



2. Then 


3. Dial

 

Graphic key face (e.g., 
)  means press indicated key.
Assign...

Issu e 3                                                                                                                                      EliteMail VMS/EliteMail Limited
1 - 2Programming Assign Voice Mail Parameters
Program Memory Block 7-1, Interface Slot Assignment.  This program
assigns the VMS/FMS(  )-U10 ETU to the right slot.
1. Press LK7.
2. Press LK1.
3. Enter the slot number of the VMS/FMS(  )-U10 ETU.

Page 3 LK3 for 2 or 4 ports; Page 3 LK4 for 8 ports.
4. Press LK7 (Digital Voice Mail)....

EliteMail VMS/EliteMail Limited Issue 3
Programming1 - 3 3. Dial 
.
4. Enter the class of service  number.
5.
, ,  to advance to page 4.
6. Press LK5 to enable live record for that class of service.
7.
to write data.
8. Repeat Steps 4~7 for each class of service.
9.
.
Program Memory Block 3-45, Live Recording Trunk Selection.  This
program selects live record feature trunk-by-trunk as follows:
1. Press LK3.
2.
.
3. Dial 
	
.
4. Press 
 followed by the CO/PBX line number.
5. Press LK2 to allow...

Issu e 3                                                                                                                                      EliteMail VMS/EliteMail Limited
1 - 4Programming Assign DVM Extensions to Hunt
Program Memory Block 4-14, Intercom Master Hunt Number.  This
program assigns the first DVM extension as the pilot number as follows:
1. Press LK4.
2. Dial 
	.
3. Press 
  followed by the port number of the first DVM
extension.
4. Press LK2 to assign the DVM port as master hunt.
5....

EliteMail VMS/EliteMail Limited Issue 3
Programming1 - 5 8. Dial 
	.
9.
 to advance to the next CO line.
10. Repeat Steps 5~9 for each CO line to ring the DVM.
11 .
to write data.
12.
.
Allow Call Forwarding
Program Memory Block 1-8-08, Class of Service (Station) Feature
Selection 2.  This program selects Call Forward Busy/No Answer feature
as follows:
1. Press LK1.
2. Press LK8.
3. Dial 
.
4. Enter the Class of Service number.
5.
.
6. Press LK5.
7.
to write data and advance to the next Class of...

Issu e 3                                                                                                                                      EliteMail VMS/EliteMail Limited
1 - 6Programming
SECTION 2 
C
ONFIGURATION 
S
UPPORT
Applications Automated Attendant/Voice Mail with call 
forwarding (release transfer)
Automated Attendant/voice Mail without call 
forwarding (Await answer transfer)
Voice Mail only ( No transfer)
Message Notification Through message waiting lamps
Call Forwarding Supported
Operator...