NEC Ds2000 Software Instructions Manual

Direct Station Selection (DSS) Console
DS1000/2000 Software ManualChapter 1: Features133
Hotline KeyUse this option to assign a programmable key 
as a Hotline key.
A DSS Console can also have a Hotline key for 
a trunk (e.g., 401). However, this capability 
requires that Direct Trunk Access be enabled 
for the extension. See 
Direct Trunk Access on 
page 139
 for more.
05 + nnn (extension 
number)
Call Coverage 
Immediate Ring
Use this option to assign a programmable key 
as an immediately ringing Call...

Direct Station Selection (DSS) Console
134Chapter 1: FeaturesDS1000/2000 Software Manual
Other Related Features
Call Coverage Keys (page 61)
DSS Consoles can have Call Coverage keys.
Directory Dialing (page 143)
Assign a Directory Dialing key on a DSS Console.
Group Call Pickup (page 177)
DSS Consoles can have Group Call Pickup keys.
Hotline (page 202)
DSS Consoles can have Hotline keys.
Night Service / Night Ring (page 265)
A DSS Console with a Night key can put the system in the night mode.
Paging...

Direct Station Selection (DSS) Console
DS1000/2000 Software ManualChapter 1: Features135
Feature Operation
To use your DSS Console trunk (line) key:
1. Press the DSS Console trunk key.
To use your DSS Console Park key:
1. Press DSS Console Park key to Park or retrieve call.
To use your DSS Console Hotline key:
1. Press key to call Hotline partner.
To use your DSS Console Call Coverage key:
You can set up the Call Coverage key for immediate ring, delayed ring , or no ring.
1. Press key to call covered...

Direct Station Selection (DSS) Console
136Chapter 1: FeaturesDS1000/2000 Software Manual
To use your DSS Console Group Call Pickup key:
You can set up the Group Call Pickup key for immediate ring, delayed ring , or no ring.
1. Press key to answer call ringing Pickup Group.
To use your DSS Console Page Zone key:
1. Press key to Page into assigned zone.
To use your DSS Console System Speed dial key:
1. Press key to dialed stored number.
System Speed Dial keys provide no BLF.
To use your DSS Console...

Direct Station Selection (DSS) Console
DS1000/2000 Software ManualChapter 1: Features137
1. Press key to record conversation in mailbox.
To use your DSS Console Night key:
1. Press key to put the system in the night mode.
To use your DSS Console ICM Directory key:
1. Press key to access Intercom Directory Dialing.
To use your DSS Console Reverse Voice Over key:
1. While on a handset call, press key to place Private Intercom call to covered extension.
DSS Console Conversation Record Key Busy Lamp...

Direct Station Selection (DSS) Console
138Chapter 1: FeaturesDS1000/2000 Software Manual
To use your DSS Console Message Center key:
1. Press key to see how many messages are waiting in the Message Center.
OR
Press
 SPK + key to call Message Center mailbox.
To use your DSS Console Save key:
1. While on a call, press key to Save the number you just dialed.
OR
While idle, press key to redial a previously saved number.
Save keys provide no BLF.
DSS Console Message Center Key Busy Lamp Indications
When the...

Direct Trunk Access
DS1000/2000 Software ManualChapter 1: Features139
Direct Trunk  Access
Description
Direct Trunk Access lets an extension user access (seize) an individual trunk. After seizing the 
trunk, the user can dial any outside telephone number without restriction. An extension’s Class of 
Service allows or denies Direct Trunk Access. Direct Trunk Access is normally only provided for 
attendants, priority users and maintenance personnel.
Conditions
None
Default Setting
Disabled
Programming...

Direct Trunk Access
140Chapter 1: FeaturesDS1000/2000 Software Manual
Programming List
Program 0501 - Numbering Plan (page 472)
Change the digit that user’s dial for Direct Trunk Access if 4 does not meet the site require-
ments.
Program 0101 - Direct Trunk Access (page 442)
Enter Y to enable an extension to use Direct Trunk Access.
Program 1801 - Extension Class of Service Assignment (page 533)
Assign Class of Service to extensions.
Program 1803 - Extension Line Access Assignments (page 546)
Direct...

Directed Call Pickup
DS1000/2000 Software ManualChapter 1: Features141
Directed Call Pickup
Description
Directed Call Pickup permits an extension user to intercept a call ringing another extension. With 
Directed Call Pickup, an extension user can pick up:
Trunk (Key Ring) calls ringing an extension
Direct Inward Lines
Transferred trunk calls
Ringing Intercom calls.
Recalls (e.g., Hold recall).
Ring Group Calls (by dialing either the ringing extension’s number or the Ring Group mas-
ter number)...

Directed Call Pickup
142Chapter 1: FeaturesDS1000/2000 Software Manual
Feature Operation
To use Directed Call Pickup to intercept a call to a co-worker’s extension:
1. Lift handset.
2. Dial 
* *.
3. Dial number of extension whose call you want to intercept.
To intercept a call ringing an attendant, dial the attendant’s extension number (e.g., 
300). Do not dial 0 or 01-04.Call ringing co-worker’s extension.
N/A.
Conversation with intercepted caller.
N/A.