NEC Ds2000 Software Instructions Manual

Conference
DS1000/2000 Software ManualChapter 1: Features113
To use Conference at an on- or off-premise single line telephone:
1. Establish Intercom or trunk call
2. Hookflash and dial extension or trunk you want to add.
3. Hookflash and dial #10 to set up Conference.
If you cannot add additional parties to your Conference, you have exceeded the sys-
tem’s Conference limit.
4. Repeat steps 2 and 3 to add aditional parties to your Conference. 

Delayed Ringing
114Chapter 1: FeaturesDS1000/2000 Software Manual
Delayed Ringing
Description
Delayed Ringing allows a trunk to start ringing a preset interval after the call starts flashing a line 
key. This is helpful for co-workers that cover each other’s calls.For example, a secretary can have 
Delayed Ringing for the trunks that ring the boss’s telephone. If the boss doesn’t answer after the 
Delayed Ringing interval, the call will start ringing the secretary’s extension.
Conditions
None
Default...

Delayed Ringing
DS1000/2000 Software ManualChapter 1: Features115
Programming List
Program 0401 - Trunk Delay Ring (page 457)
Set how long the system waits before ringing an extension that has the Delayed Ringing 
option enabled.
Program 1805 - Ring Assignments (page 551)
For the selected trunk, set the ring assignment to 4 to enable Delayed Ringing. The other 
options are: 1 (lamp only day and night), 2 (ringing day and night) and 3 (night ring only, 
lamp during the day).
Other Related Features
Call...

Dial Number Preview
116Chapter 1: FeaturesDS1000/2000 Software Manual
Dial Number Preview
Description
Dialing Number Preview lets a display keyset user dial and review a number before the system dials 
it out.
Conditions
None
Default Setting
Enabled
Programming Guide
None
Programming List
None
Other Related Features
Central Office Calls, Placing (page 93)
Dial Number Preview allows an extension user to review a number before the system dials it 
out.
Feature Operation
To dial using Dial Number Preview:...

Dial Number Preview
DS1000/2000 Software ManualChapter 1: Features117
4. Press line key.
To correct the displayed digits before dialing them out:
1. Use VOL 
 and VOL  until the cursor replaces the digit you want to change.
VOL 
 moves the cursor to the left. VOL   moves the  cursor to the right.
2. Dial the digit that you want to replace the cursor.
3. Press VOL 
 and VOL  to place the cursor over any other digits you want to edit.
OR
Press VOL 
 until the entire number displays to the left of...

Direct Inward Line
118Chapter 1: FeaturesDS1000/2000 Software Manual
Direct Inward Line
Description
A Direct Inward Line (DIL) is a trunk that rings an extension directly. Since DILs only ring one 
extension, employees always know which calls are for them. For example, a company operator can 
have a Direct Inward Line for International Sales Information. When outside callers dial the DIL’s 
phone number, the call rings the operator on the International Sales line key. The DIL does not ring 
other...

Direct Inward Line
DS1000/2000 Software ManualChapter 1: Features119
Programming Guide
Step-by-step guide for setting up Direct 
Inward Line (Page 1 of 3)
Step 1: Check to be sure each trunk’s circuit type matches the connected trunk circuit.
• In Program 1001 - Trunk Circuit Type (page 498), 
enter the correct circuit type for each trunk (51 = 
loop start DTMF, 52 = loop start DP).
Step 2: Assign the DIL day mode destination.
• In Program 1003 - Direct Termination (Day) 
(page 509), assign the DIL day...

Direct Inward Line
120Chapter 1: FeaturesDS1000/2000 Software Manual
Step 6: Do you want an unanswered DIL to overflow during the night mode?
• In Program 1003 - Activate Overflow at Night 
(page 510), enter Y.
• In Program 1003 - Activate Overflow at Night 
(page 510), enter N.
Step 7: Assign the DIL night overflow destination.
• In Program 1003 - Night Overflow Destination 
(page 510), assign the DIL night mode termina-
tion. The destination can be an extension, UCD 
Group master number, Ring Group master...

Direct Inward Line
DS1000/2000 Software ManualChapter 1: Features121
Programming List
Program 0401 - DIL No Answer (page 456)
When the DIL destination is an e
xtension:
If DIL Overflow is set up, this interval determines how long a DIL rings its destination before 
ringing its programmed overflow destination. If DIL Overflow is not set up, this interval deter-
mines how long a DIL rings is destination before diverting to Key Ring.
Step 11: If a DIL to a Ring Group master number is unanswered, does call...

Direct Inward Line
122Chapter 1: FeaturesDS1000/2000 Software Manual
Program 0401 - DIL No Answer (page 456)
When the DIL destination is a Ring Group master number:
If DIL Overflow is set up, this interval determines how long a DIL rings its destination before 
ringing its programmed overflow destination. If DIL Overflow is not set up, this interval deter-
mines how long a DIL rings is destination before diverting to Key Ring.
Program 0401 - Transfer Recall (page 455)
This interval sets how long a call...