NEC Ds2000 Software Instructions Manual

Caller ID
DS1000/2000 Software ManualChapter 1: Features83
Programming Guide
Step-by-step guide for setting up Caller ID
Step 1: Should the trunk provide  Caller?
• In DS2000, be sure that Caller ID Daughter 
Boards are installed on the ATRU PCBs.
• In DS2000, for Program 1001 - Caller ID 
(page 503), enter 2 (for daughter board).
• In DS1000, for Program 1001 - Caller ID 
(page 503), enter 1 (for DSP).
• In Program 1001 - Caller ID (page 503), enter 0.
Step 2: Should the  extension display Caller ID?
•...

Caller ID
84Chapter 1: FeaturesDS1000/2000 Software Manual
Programming List
Program 0101 - CLID Display (page 443)
This option enables (Y) or disables (N) Caller ID in an extension’s Class of Service. If 
enabled, Caller ID will occur for all extensions with this Class of Service provided Caller ID 
is enabled in other system programming. If disabled (N), Caller ID will never occur for exten-
sions with this Class of Service.
Program 0101 - 2nd CALL CLID (Extension Level Call Waiting Caller ID) (page...

Caller ID
DS1000/2000 Software ManualChapter 1: Features85
Program 1001 - Voice Mail Caller ID (page 503)
This option enables (Y) or disables (N) the capability of the telephone system to send Caller 
ID data to an NVM-Series Voice Mail. If enabled, the telephone system will send incoming 
Caller ID data for any trunk answered by Voice Mail. (This will occur, for example, for DILs 
terminated to the Voice Mail master number.) If disabled (N), the telephone system will not 
provide a trunk’s Caller ID...

Caller ID
86Chapter 1: FeaturesDS1000/2000 Software Manual
Feature Operation
To cancel the Caller ID display and return your phone to its normal display:
You can only do this while you’re on a call, not while your phone is ringing.
1. Press 
CLEAR.
To turn the Caller ID display back on (after you press CLEAR to cancel it):
1. Press 
CHECK.
To display the Caller ID data for the third party’s call (i.e., use Third Party Caller ID 
check):
1. Press 
ICM + CHECK.
2. Press the key for the call you want to...

Central Office Calls, Answering
DS1000/2000 Software ManualChapter 1: Features87
Central Office Calls, Answering
Description
The system provides flexible routing of incoming CO (trunk) calls to meet the exact site requirements.
Answering Priority
When multiple calls ring an extension simultaneously, the system services the ringing calls in the 
following order:
1. Line key (from lowest to highest)
2. Fixed Loop Key (from lowest to highest)
3. Switched Loop Key (from lowest to highest)
4.
ICM Key
Overflow...

Central Office Calls, Answering
88Chapter 1: FeaturesDS1000/2000 Software Manual
DS1000
All extensions have full access on all trunks.
Trunks 4-6 require the Expansion Board.
Prior to 02.00.09
Extensions have immediate day/night ring on trunks 1-4 (line keys 1-4), and delay ring on 
trunks 5 and 6 (line keys 5 and 6).
2.00.09 or Higher
Extensions have immediate day/night ring on all trunks.
Trunks 1-6 ring extensions on line keys 1-6.
2.01.07 or higher
Extensions have immediate day/night ring on...

Central Office Calls, Answering
DS1000/2000 Software ManualChapter 1: Features89
• In Program 1803 - Extension Line Access Assign-
ments (page 546), enter 3 to allow full access 
(both incoming and outgoing).
Step 4: Set the ringing options at each extension for each trunk.
• In Program 1805 - Ring Assignment (page 551), 
enter 1 for each trunk that should lamp only (day 
and night).
• In Program 1805 - Ring Assignment (page 551), 
enter 2 for each trunk that should ring during the 
day and at night.
•...

Central Office Calls, Answering
90Chapter 1: FeaturesDS1000/2000 Software Manual
Step 7: While on a trunk call, is a user’s conversation transmitted to the caller at a comfort-
able level?
• In Program 1001 - Trunk Transmit Gain 
(page 499), leave this option at its current setting.
• In Program 1001 - Trunk Transmit Gain 
(page 499), increase or decrease the trunk trans-
mit gain for the optimum transmission level for 
the connected telco or PBX.
Step 8: While on a trunk call, is the conversation...

Central Office Calls, Answering
DS1000/2000 Software ManualChapter 1: Features91
Programming List
Program 0401 - Trunk Delay Ring (page 457)
Set how long the system flashes a line key before ringing an extension that has the Delayed 
Ringing option enabled.
Program 0402 - Minimum Ring Detection Timer (page 461)
Set the threshold for ring detection. If the ring signal is longer than this interval, the system 
interprets the signal as valid ringing. If the signal is equal to or shorter than this interval,...

Central Office Calls, Answering
92Chapter 1: FeaturesDS1000/2000 Software Manual
Other Related Features
Call Timer (page 71)
The Call Timer helps a user keep track of the time they spend on the phone.
Direct Inward Line (page 118)
A DIL rings an extension directly.
Line Keys (page 238)
Line keys simplify answering trunk calls.
Loop Keys (page 242)
In order to answer trunk calls, extensions without line keys should have loop keys.
Night Service / Night Ring (page 265)
Night Service determines how outside...