NEC Ds2000 Software Instructions Manual

Call Timer
DS1000/2000 Software ManualChapter 1: Features73
Feature Operation
To time your trunk call if you have an Automatic Call Timer key:
1. Place or answer trunk call.
2. The Call Timer starts automatically.
You can press the Automatic Call Timer key once to turn the timer off. Press the key a 
second time to restart the timer.
You can also press CHECK + the timer key to restart the timer.
To time your call if you have a Manual Call Timer key:
You can also use your Manual Call timer key as a stop...

Call Waiting / Camp-On
74Chapter 1: FeaturesDS1000/2000 Software Manual
Call Waiting / Camp-On
Description
With Call Waiting, an extension user may call a busy extension and wait in line (Camp-On) without 
hanging up. When the user Camps-On (by dialing 2), the system signals the busy extension with 
two beeps indicating the first waiting call. (The busy extension can be on a handset or Handsfree 
call.) The call goes through when the extension becomes free.
If an extension has more than one caller...

Call Waiting / Camp-On
DS1000/2000 Software ManualChapter 1: Features75
Programming Guide
Step-by-step guide for setting up Call Waiting 
/ Camp-On
Step 1: Should extension be able to Camp On to a busy co-worker?
• In Program 0101 - Camp-On to Busy Extension 
(page 440), enter Y in each Class of Service that 
should allow users to Camp-On to a busy exten-
sion.
• In Program 0101 - Privacy (page 441), be sure 
Privacy is disabled at the destination extension 
(N).
• In Program 1801 - Extension Class of...

Call Waiting / Camp-On
76Chapter 1: FeaturesDS1000/2000 Software Manual
Programming List
Program 0101 - Camp-On to Busy Extension (page 440)
In an extension’s Class of Service, enter Y to allow the extension to Camp-On to a busy co-
worker. Enter N to prevent the extension from Camping-On to a busy co-worker. Entering N 
also automatically converts an extension’s Camp On to Callback.
Program 0101 - Privacy (page 441)
An extension with Privacy enabled (Y) will block Camp On / Call Waiting.
Program 0201 -...

Call Waiting / Camp-On
DS1000/2000 Software ManualChapter 1: Features77
Feature Operation
To Camp-On to a busy extension:
1. Call busy extension.
2. Dial 2; do not hang up.
If you hang up, the system converts your Camp-On to a Callback.
3. When your co-worker hangs up their initial call:
4. Speak to your co-worker when they answer their Camp-On ring.Busy tone.
ICM and SPK on.
Busy tone stops.
ICM and SPK on.
Ringback. Camp-On rings your co-worker’s phone also.
ICM and SPK on. 

Callback
78Chapter 1: FeaturesDS1000/2000 Software Manual
Callback
Description
When an extension user calls a busy co-worker, they can leave a Callback request for a return call. 
The system services Callback requests as follows:
Caller at extension A leaves a Callback at extension B.
Caller can place or answer additional calls in the mean time.
When extension B becomes idle, the system rings extension A. This is the Callback ring.
Once caller A answers the Callback ring, the system rings (formerly...

Callback
DS1000/2000 Software ManualChapter 1: Features79
Programming List
Program 0101 - Camp-On to Busy Extension (page 440)
In an extension’s Class of Service, enter Y to allow the extension to leave a Callback for a 
busy co-worker. Enter N to prevent the extension from leaving a Callback for a busy co-
worker.
Program 0201 - Call Waiting (Camp-On) Tone (page 445)
Enter Y to enable Camp-On tones system-wide. Enter N to disable Camp-On Tones system-
wide. 
Program 0403 - Call Waiting Tone Interval...

Callback
80Chapter 1: FeaturesDS1000/2000 Software Manual
Feature Operation
To place a Callback:
1. Call busy extension.
2. Dial 2 and hang up.
Stay on the line without hanging up if you want to Camp-On instead.
3. When the busy co-worker becomes free:
4. Lift handset to answer.
5. Speak to your co-worker when call goes through.Busy tone.
ICM and SPK on.
Busy tone stops.
ICM and SPK off.
Intercom ring.
ICM and SPK off.
Two beeps.
ICM on. 

Caller ID
DS1000/2000 Software ManualChapter 1: Features81
Caller ID
Description
Caller ID allows a display keyset to show an incoming caller’s telephone number (called Directory 
Number or DN) and optional name. Caller ID supports the telco’s Called Number Identification 
(CNI) and Called Number Delivery (CND) service, when available. These services provide the 
Caller ID information (i.e., messages) between the first and second ring burst of an incoming call.
Caller ID provides the following features:...

Caller ID
82Chapter 1: FeaturesDS1000/2000 Software Manual
Station Message Detail Recording
03/10/2000 11:11A
---+---+--------------------------------+----------+---------+--------+---
Sta|Lin|         Number Dialed          |  Account |  Start  |Duration| T 
---+---+--------------------------------+----------+---------+--------+---
301| 02|                      2139261000|          |11:11:39A|00:00:13|IN 
301| 02|                  ANDERSON ALLEN|          |11:11:39A|00:00:13|IN 
301| 02|...