NEC Ds2000 Software Instructions Manual

Check Key
DS1000/2000 Software ManualChapter 1: Features103
Check Key
Description
A display telephone user can use the CHECK key to check keyset and DSS Console Programmable 
Function Key assignments and Personal Speed Dial bin names.
Conditions
None
Default Setting
Enabled
Programming Guide
None
Programming List
None
Other Related Features
Programmable Function Keys (page 304)
Check Programmable Function Key assignments.
Speed Dial (page 332)
Check Personal Speed Dial bin assignments.
Feature...

Check Key
104Chapter 1: FeaturesDS1000/2000 Software Manual
To check a Personal Speed Dial bin name and number:
1. Press CHECK
.
2. Press the Personal Speed Dial Key once to display the name for the lower numbered bin.
For example, pressing bin 1 in this step displays the name for 701.
3. Press the Personal Speed Dial Key a second time to display the number stored in the lower 
numbered bin.
For example, pressing bin 1 in this step displays the number stored for 701.
4. Press the Personal Speed Dial Key...

Class of Service
DS1000/2000 Software ManualChapter 1: Features105
Class of Service
Description
Class of Service (COS) sets various features and dialing options for extensions. The system allows 
any number of extensions to share the same Class of Service.
The table below shows each Service Option. Refer to the individual features referenced in the table 
for more.
Conditions
None
Default Setting
Extension 300 (normally the attendant) has Class of Service 1. (In DS2000 software version 
02.01.07 and...

Class of Service
106Chapter 1: FeaturesDS1000/2000 Software Manual
System Speed Dial 
AccessUse this option to enable or disable an exten-
sion’s ability to access System Speed Dial. 
• See System Speed Dial on page 332 for 
more.SYS SPDL ACCESS?Y = Enable
N = DisableY
Extended RingUse this option to enable or disable 
Extended Ringing at the extension.
• See Extended Ringing on page 154 for 
more.EXTENDED RING?Y = Enabled
N = DisableN
PrivacyUse this option to enable or disable Privacy 
at the...

Class of Service
DS1000/2000 Software ManualChapter 1: Features107
Access Page Zone 4Use this option to enable or disable an exten-
sion’s ability to make a Paging announce-
ment into zone 4.
• See Paging on page 281 for more.PAGE ZONE 4?Y = Enable
N = DisableY
Access Page Zone 5Use this option to enable or disable an exten-
sion’s ability to make a Paging announce-
ment into zone 5.
• See Paging on page 281 for more.PAGE ZONE 5?Y = Enable
N = DisableY
Access Page Zone 6Use this option to enable or...

Class of Service
108Chapter 1: FeaturesDS1000/2000 Software Manual
Direct Trunk  AccessUse this option to enable or disable an exten-
sion’s ability to use Direct Trunk Access. 
Note that enabling Direct Trunk Access 
allows the user to bypass Toll Restriction.
• See Central Office Calls, Placing on 
page 93 for more.DIRECT TRK  ACCES?Y = Enable
N = DisableCOS 1 = Y
COS 2-15 = N
Remote Call Forwarding / 
Alternate Attendant• This option is currently not imple-
mented. REMOTE FWRD?Y = Enable
N =...

Class of Service
DS1000/2000 Software ManualChapter 1: Features109
Programming Guide
Programming List
Program 0101 - Class of Service Options (page 440)
Set Class of Service options for extensions, OPX trunk and tie lines.
Program 1001 - Trunk Class of Service Assignment (page 502)
Assign Class of Service (1-15) to OPX trunks and tie lines.
Program 1801 - Extension Class of Service Assignment (page 533)
Assign Class of Service (1-15) to extensions.
Forced Account Codes 
for Toll Calls OnlyUse this...

Class of Service
110Chapter 1: FeaturesDS1000/2000 Software Manual
Other Related Features
Refer to the Class of Service chart above.
Attendant Position (page 46)
By default, the system assigns Class of Service 1 to the attendant. This provides the attendant 
with Alternate Attendant, Barge In, Call Forwarding Off Premise, Direct Trunk Access, 
Forced Trunk Disconnect, Night Service, and Trunk Queuing (Camp On) capability.
Feature Operation
None 

Conference
DS1000/2000 Software ManualChapter 1: Features111
Conference
Description
Conference lets an extension user add additional inside and outside callers to their conversation. 
The following table shows the system’s Conference capacities:
The system’s 32 Conference circuits are dynamically allocated as users request them.
Conditions
None
Default Setting
Conference enabled.
Programming Guide
None
Programming List
Program 1803 - Extension Line Access Assignments (page 546)
An extension can join a...

Conference
112Chapter 1: FeaturesDS1000/2000 Software Manual
Meet-Me Conference (page 247)
Monitor / Silent Monitor (page 257)
An extension user cannot Monitor a Conference.
Privacy Release Groups (page 297)
Tandem Trunking / Unsupervised Conference (page 379)
Off-Hook Signaling (page 270)
After hearing off-hook signals, an extension user can Conference their active call with the 
waiting call.
Off-Premise Extensions / On-Premise SLT Extensions (page 274)
On- and off-premise SLT extensions can use...