NEC Ds2000 Software Instructions Manual

Extension Hunting
DS1000/2000 Software ManualChapter 1: Features163
Extension Hunting Timers
The following diagrams show how the system implements various timers when handling 
Extension Hunting calls.
Transfer to Hunt GroupBusy/Ring No Answer All Calls (Type 3)
Circular and Terminal Hunting
0401 - Transfer Recall
0403 - Call Fwd Ring No Answer
Call rings first member for Transfer Recall time.
Call transferred into hunt group.
In unanswered, call rings the next and succeeding 
members for the Call...

Extension Hunting
164Chapter 1: FeaturesDS1000/2000 Software Manual
Transfer to Hunt GroupBusy/Ring No Answer All Calls (Type 3) Circular and Terminal Hunting
Routing to Busy UCD Group with Overflow
0401 - Transfer Recall
0403 - Call Fwd Ring No Answer
Call rings extension A for the Transfer Recall 
time.
Call transferred to extension A, which is the sin-
gle member of a type 3 hunt group that is set up 
to hunt to extension B.
In unanswered at extension A, the call hunts to 
extension B which is the...

Extension Hunting
DS1000/2000 Software ManualChapter 1: Features165
DIL (no overflow) to Hunt GroupBusy/Ring No Answer All Calls (Type 3)
Circular and Terminal Hunting
DIL (with o
verflow) to Hunt GroupBusy/Ring No Answer All Calls (Type 3)
Circular and Terminal Hunting
0401 - DIL No Answer
0401 - DIL No Answer
DIL rings programmed DIL destination for the 
DIL No Answer time.
DIL (with no overflow) directly rings hunt group 
member.
In unanswered, call rings the next and succeeding 
members for the DIL No...

Extension Hunting
166Chapter 1: FeaturesDS1000/2000 Software Manual
Trunk Call on Hold at Hunt Group MemberBusy/Ring No Answer All Calls (Type 3)
Circular and Terminal Hunting
Programming List
Circular Hunting
Program 0401 - Transfer Recall (page 455)
Set how long a trunk call waits at a busy member extension. This interval also sets how long a 
call rings each member extension as it cycles through the group.
Program 0401 - DIL No Answer (page 456)
Set how long a DIL rings its destination member...

Extension Hunting
DS1000/2000 Software ManualChapter 1: Features167
Terminal Hunting 
Program 0401 - Transfer Recall (page 455)
Set how long a trunk call waits at a busy member extension. This interval also sets how long a 
call rings each member extension as it cycles through the group.
Program 0401 - DIL No Answer (page 456)
Set how long a DIL rings its destination member extension before cycling through the group.
Program 1807 - Hunt Type (page 554)
Enter the same hunt type for all extensions in the...

Extension Hunting
168Chapter 1: FeaturesDS1000/2000 Software Manual
Program 0510 - Hunt Group Master Number (page 485)
Define the master extension number for the UCD hunt group. UCD Hunting group master 
numbers can be 100-299, 332-400, or 417-899. They cannot be in the extension (300-395 in 
DS2000 or 300-325 in DS1000) or trunk (401-448 in DS2000 or 401-406 in DS1000) number 
range. By default, the systems uses codes beginning with 0 for operator access and 9 for 
trunk/trunk group access.
Program 0510...

Extension Hunting
DS1000/2000 Software ManualChapter 1: Features169
Transfer (page 393)
Trunk calls transferred to a Terminal or Circular Hunting group member activate hunting. In 
addition, trunk calls transferred to a UCD group master number activate hunting.
Voice Mail (page 414)
To set up extension overflow to Voice Mail:
- In Program 1807 -  
Hunt Type on page 554, enter Hunt Type 3.
- In Program 1807 -  
Hunt Destination on page 554, designate the Voice Mail master number as 
the Hunt...

Flash
170Chapter 1: FeaturesDS1000/2000 Software Manual
Flash
Description
Flash allows an extension user to access certain CO and PBX features by interrupting trunk loop 
current. Flash lets an extension user take full advantage of whatever features the connected telco or 
PBX offers. You must set the Flash parameters for compatibility with the connected telco.
Conditions
None
Default Setting
Enabled
Programming Guide
Programming List
Program 0402 - PBX/Centrex Flash (page 460)
Set the Flash interval....

Flash
DS1000/2000 Software ManualChapter 1: Features171
Other Related Features
Call Timer (page 71)
Flash restarts the Call Timer.
PBX/Centrex Compatibility (page 291)
Flash allows an extension user to access certain telco or PBX features.
Toll Restriction (page 385)
The system enforces normal Toll Restriction after the Flash.
Feature Operation
To Flash the trunk you are on:
1. Press FLASH
2. Dial the code for the desired CO/PBX feature.A brief interruption, followed by new CO/PBX dial tone.
Line/loop...

Flexible Numbering Plan
172Chapter 1: FeaturesDS1000/2000 Software Manual
Flexible Numbering Plan
Description
The system’s Flexible Numbering Plan allows you to change the digits users dial to reach the atten-
dant, other co-worker’s and trunks. The following chart shows the areas of the system number plan 
you can change.
Conditions
None
Default Setting
See the table above.
Programming Guide
DS2000 Fixed Slot
Available. DS2000 U Slot
DS1000
Change the digits users dial for co-workers and other...