NEC Ds2000 Software Instructions Manual

Flexible Numbering Plan
DS1000/2000 Software ManualChapter 1: Features173
Step 2: Do you want to change the digits users dial to reach coworkers over the Intercom?
• In Program 0501 - Numbering Plan (page 472), 
change the options for digit 3 and the new Inter-
com access digit. Review your new choice to be 
sure it does not affect other system operations.
• In Program 0505 - Station Port Extension Num-
bers (Fixed Slot) (page 480), assign new exten-
sion numbers to station ports.
  OR
In Program 0505 -...

Flexible Numbering Plan
174Chapter 1: FeaturesDS1000/2000 Software Manual
Programming List
Program 0501 - Numbering Plan (page 472)
Customize the system’s number plan by changing the digits users dial to reach an operator, 
co-workers (i.e., Intercom), Direct Trunk Access and Trunk Group Access.
Program 0504 - Trunk Port Extension Numbers (Fixed Slot) (page 476)
Enter the extension number associated with each trunk port.
Program 0504 - View Extension (U Slot and DS1000) (page 478)
Select an extension or...

Forced Trunk Disconnect
DS1000/2000 Software ManualChapter 1: Features175
Forced Trunk  Disconnect
Description
Forced Trunk Disconnect allows an extension user to disconnect (release) another extension’s 
active trunk call. Forced Trunk Disconnect lets a user access a busy trunk in an emergency, when no 
other trunks are available. Maintenance technicians can also use Forced Trunk Disconnect to 
release a trunk on which there is no conversation. This can happen if a trunk does not properly dis-
connect...

Forced Trunk Disconnect
176Chapter 1: FeaturesDS1000/2000 Software Manual
Programming List
Program 0101 - Forced Trunk Disconnect (page 441)
In an extension’s Class of Service, enter Y to enable the ability to use Forced Trunk Discon-
nect.
Program 1801 - Extension Class of Service Assignment (page 533)
Assign Class of Service to extensions.
Program 1803 - Extension Line Access Assignments (page 546)
An extension can only use Forced Trunk Disconnect on a trunk to which it has outgoing 
(option 2) or...

Group Call Pickup
DS1000/2000 Software ManualChapter 1: Features177
Group Call Pickup
Description
Group Call Pickup allows an extension user to answer a call ringing an extension in their assigned 
Pickup Group.This permits co-workers in the same Pickup Group to easily answer each other’s ring-
ing calls. The user can intercept the ringing call by dialing a code or pressing a programmed Group 
Call Pickup key. The system has a maximum of eight Pickup Groups, with an unlimited number of 
extensions in...

Group Call Pickup
178Chapter 1: FeaturesDS1000/2000 Software Manual
Step 2: Should an incoming call on a trunk ring all extensions in a Pickup Group?
• In Program 1003 - Call Pickup Group (page  509), 
assign the trunk to a Pickup Group (1-8).
• In Program 1803 - Extension Line Access Assign-
ments (page 546), make sure extensions in the 
Pickup Group have incoming (option 1) or full 
(option 3) access to the trunk.
• In Program 1805 - Ring Assignments (page 551), 
make sure to enable ringing for all...

Group Call Pickup
DS1000/2000 Software ManualChapter 1: Features179
Programming List
Program 1003 - Call Pickup Group (page 509)
Have an incoming call on the trunk ring all the extensions in the assigned pickup group.
Program 1701 - Programmable Function Key Assignments (page 517)
Assign a programmable key on an extension as a Group Call Pickup key (09 = Immediate 
Ring, 10 = No Ring, 11 = Delayed Ring). The options are 1-8 (Pickup Groups 1-8) or 0 (unas-
signed).
Program 1704 - DSS Console Key...

Group Call Pickup
180Chapter 1: FeaturesDS1000/2000 Software Manual
Feature Operation
To answer a call ringing a phone in your Pickup Group:
1. Lift handset.
2. Press flashing Group Pickup key.
OR
Dial * #.
  User Programmable Feature
Feature Mnemonic Operation Access Level
The shaded row below shows the Fixed Slot software User Programmable Feature..
Group Call Pickup#RG#RG + press Group Call Pickup key 
repeatedly to select ringing mode.N/A
Group Call Pickup
#RA
#RAP + Group Call Pickup Key repeat-...

Group Listen
DS1000/2000 Software ManualChapter 1: Features181
Group Listen
Description
Group Listen permits a keyset user to talk on the handset and have their caller’s voice broadcast 
over the telephone speaker. This lets the keyset user’s co-workers listen to the conversation. Group 
Listen turns off the keyset’s Handsfree microphone so the caller does not hear the co-worker’s 
voices during a Group Listen.
Conditions
None
Default Setting
Enabled
Programming List
Programming List
Program 1807 -...

Group Listen
182Chapter 1: FeaturesDS1000/2000 Software Manual
Feature Operation
To initiate Group Listen:
1. Place or answer call using the handset.
2. Press 
SPK twice (but do not hang up).
You can talk to the caller through your handset. You and your co-workers hear your 
caller’s voice over your phone’s speaker.
Your handsfree microphone and handset receiver are off.
To talk handsfree after initiating Group Listen:
1. Press 
SPK twice.
2. Hang up.
To cancel Group Listen and return to your handset:...