Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways User Guide

MultiVOIP User Guide Quick Start Instructions
41
5. In the “Destination Pattern” field of the Add/Edit Outbound
Phonebook screen, enter the digits from step 4 followed by the digits
from step 3.
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago system.
Answer:  enter 81312 as
Destination Pat-
tern in Outbound
Phone-book of
Seattle voip.
London/Birming. system.
Leading zero of
Birmingham area code is
dropped when combined
with national-dialing
access code. (Such
practices...

Quick Start Instructions MultiVOIP User Guide
42
6. Tally up the number of digits that must be dialed to reach the  remote
voip site (including prefix digits of all types).  Enter this number in
the “Total Digits” field.
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago system.
To complete Seattle-to-
Chicago call, 81312 must be
followed by the 7-digit local
phone number in Chicago.
Answer:  enter 12 as number
of Total Digits in
Outbound Phone-
book of Seattle
voip....

MultiVOIP User Guide Quick Start Instructions
43
field in the Outbound Phonebook.  This precludes the problem of having to
make two inbound phonebook entries at remote voips, one to account for
situations where “8” is used as the PBX access digit, and another for when
“9” is used.
8. Select the voip protocol that you will use (H.323 or SIP).
9. Click OK to exit from the Add/Edit Outbound Phonebook screen.
Inbound Phonebook
1. Open the MultiVOIP program.  
(Start | MultiVOIP xxx | Configuration
2. Go to...

Quick Start Instructions MultiVOIP User Guide
44
4. In the “Add Prefix” field, enter any digits that must be dialed from
your local voip to gain access to the PSTN.
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago system.
On Seattle PBX, “9” is used to
get an outside line.
Answer:  9 is prefix to be
added by local
(Seattle) voip.
London/Birming. system.
On London PBX, “9” is used
to get an  outside line.
Answer: 9 is prefix to be
added by local
(London) voip.
Euro,...

MultiVOIP User Guide Quick Start Instructions
45
6. In the “Description” field, it is useful to describe the ultimate
destination of the calls.  For example, in a New York City voip
system, “incoming calls to Manhattan office,” might describe a
phonebook entry, as might the descriptor “incoming calls to NYC
local calling area.”  The description should make the routing of calls
easy to understand.  (40 characters max.)
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago...

Quick Start Instructions MultiVOIP User Guide
46
Phonebook Tips
Preparing the phonebook for your voip system is a complex task that, at
first, seems quite daunting.  These tips may make the task easier.
1. 
Use Dialing Patterns, Not Complete Phone Numbers. You will not
generally enter complete phone numbers in the voip phonebook.
Instead, you’ll enter “destination patterns” that involve area codes and
other digits.  If the destination pattern is a whole area code, you’ll be
assigning all calls to that...

MultiVOIP User Guide Quick Start Instructions
47
(b) access codes.  There are digits (PSTN access codes) that must be
dialed to gain access to an operator, to access the publicly switched
‘long-distance’ calling system(North America), to access the publicly
switched ‘national’ calling system (Europe and elsewhere), or to access
the publicly switched ‘international’ calling system (worldwide).
There are digits (PBX access codes) that must be dialed by phones
connected to PBX systems or key systems.  Often...

Quick Start Instructions MultiVOIP User Guide
48
4.  Using a Comma.Detail
, = 1-second pause
Commas are used in telephone
dialing strings to indicate a pause
to allow a dial tone to appear
(common on PBX and key
systems).  Commas may be used
only in the “Add Prefix” field of
the Inbound Phonebook.
in many PBX systems
(not needed in all)
5. Ease of Use.  The phonebook setup determines how easy the voip
system is to use.  Generally, you’ll want to make it so dialing a voip call
is very similar to dialing...

MultiVOIP User Guide Quick Start Instructions
49
Phonebook Example
Flagstaff Office
204.16.49.75
8-Channel
Analog VoIP
(MVP810)
PSTN
PBX System.
Main Number:
777-5600
30 extensions
Area: 520
Santa Fe Office
PBX System.
Main Number:
444-3200
40 extensions
PSTN
204.16.49.74
8-Channel
Analog VoIP
(MVP810)
Area: 505
PBX System.
Main Number:
333-2700
204.16.49.73
24-Channel
Digital VoIP
(MVP2410)
PSTN
Boise OfficeArea: 208
90 extensions
IP
Network
EachOutbound Phonebookcontains two
pairs of entries, two...

Quick Start Instructions MultiVOIP User Guide
50
Flagstaff Voip Flagstaff VoipInbound Phonebook Outbound PhonebookPrefix to
RemovePrefix
to AddDescription
Incoming CallsDestin.
PatternTo t a l
DigitsPrefix to
RemovePrefix
to  Ad dIP
AddrDescription
Outgoing Calls
1520 9 Incoming calls
to PSTN,
Flagstaff local
calls91505 12 9 none204.16
.49.74Outgoing calls
to Santa Fe
area
15207775 5 Incoming calls
to extensions
of company’s
PBX system
in Flagstaff2 3 none 1505
444
3204.16
.49.743-digit calls to
Santa...