Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways User Guide

MultiVOIP User Guide Overview
21
Analog MultiVOIP LED Descriptions
  
MVP-210/410/810 Front Panel LED Definitions
LED NAMEDESCRIPTION 
General Operation LEDs (one set on each MultiVOIP model)
PowerIndicates presence of power.
BootAfter power up, the Boot LED will be on briefly while the
MultiVOIP is booting.  It lights whenever the MultiVOIP is
booting or downloading a setup configuration data set.
EthernetRCV. Receive.  Lights (blinks) when receiving data on
Ethernet port.
XMT. Transmit.  Lights...

Overview MultiVOIP User Guide
22
Computer Requirements
The computer on which the MultiVOIP’s configuration program is
installed must meet these requirements:
•must be IBM-compatible PC with MS Windows operating
system;
•must have an available COM port for connection to the
MultiVOIP.
However, this PC does not need to be connected to the MultiVOIP
permanently. It only needs to be connected when local configuration
and monitoring are done.  Nearly all configuration and monitoring
functions can be done...

MultiVOIP User Guide Overview
23
Specifications
Specs for Digital T1 MultiVOIP Units
Digital T1 MultiVOIP Specifications
Parameter
……/Model
MVP-2400 MVP-2410MVP-2410
w/ MVP24-48
Expansion
Card
Operating
Voltage(s)External
transformer:
1.6A@5v
100-240 VAC
1.2 - 0.6 A100-240 VAC
1.2 - 0.6 A
Mains
Frequencies50/60 Hz 50/60 Hz 50/60 Hz
Power
Consumption13 watts 17 watts 27 watts
Mechanical
Dimensions6.2” W x
9” D x
1.4” H
15.8cm W x
22.9cm D x
3.6cm H1.75”H x
17.4”W x
8.75”D
4.5cm H x
44.2 cm W x
22.2 cm...

Overview MultiVOIP User Guide
24
Specs for Digital E1 MultiVOIP Units
Digital E1 MultiVOIP Specifications
Parameter
……/ModelMVP-3010 MVP-3010
w/ MVP30-60
Expansion
Card
Operating
Voltage(s)100-240 VAC
1.2 - 0.6 A100-240 VAC
1.2 - 0.6 A
Mains
Frequencies50/60 Hz 50/60 Hz
Power
Consumption17 watts 27 watts
Mechanical
Dimensions1.75”H x
17.4”W x
8.75”D
4.5cm H x
44.2 cm W x
22.2 cm D1.75”H x
17.4”W x
8.75”D
4.5cm H x
44.2 cm W x
22.2 cm D
Weight7.1 lbs.
(3.2 kg)7.5 lbs.
(3.4 kg) 

MultiVOIP User Guide Overview
25
Specs for Analog MultiVOIP Units
Analog MultiVOIP Specifications
Parameter
……/ModelMVP210 MVP410 MVP810
or
MVP410 + 428
Operating
Voltage(s)External
transformer:
3A @5V100-240 VAC
1.2 - 0.6 A100-240 VAC
1.2 - 0.6 A
Mains
Frequencies50/60 Hz 50/60 Hz 50/60 Hz
Power
Consumption19 watts 29 watts 46 watts
Mechanical
Dimensions6.2” W x
9” D x
1.4” H
15.8cm W x
22.9cm D x
3.6cm H1.75”H x
17.4”W x
8.5”D
4.5cm H x
44.2 cm W x
21.6 cm D1.75”H x
17.4”W x
8.5”D
4.5cm H x
44.2 cm W...

Overview MultiVOIP User Guide
26
Installation at a Glance
The basic steps of installing your MultiVOIP network involve
unpacking the units, connecting the cables, and configuring the units
using management software (MultiVOIP Configuration software) and
confirming connectivity with another voip site.  This process results in a
fully functional Voice-Over-IP network.
Related Documentation
The MultiVOIP User Guide (the document you are now reading) comes
in electronic form and is included on your system...

27
Chapter 2: Quick Start Instructions 

Quick Start Instructions MultiVOIP User Guide
28
Introduction
This chapter gets the MultiVOIP up and running quickly.  The details
we’ve skipped to make this brief can be found elsewhere in the manual
(see Table of Contents and Index).
MultiVOIP Startup Tasks
TaskSummary




 
 Collecting Phone/IP
Details (vital!)
The MultiVOIP must be configured to
interface with your particular phone
system and IP network.  To do so,
certain details must be known about
those phone and IP systems.




 
 PlacementDecide...

MultiVOIP User Guide Quick Start Instructions
29
Phone/IP Details *Absolutely Needed*
Before Starting the Installation
  
Gather IP Information
➼Ask your computer network
administrator.Info needed to operate:
all MultiVOIP models.
IP Network Parameters:
Record for each VOIP Site
in System


• IP Address
• IP Mask
• Gateway
• Domain Name Server (DNS) Info
   
(not implemented; for future use)
Gather Telephone Information
➼T1 Phone Parameters
Ask phone company or
PBX maintainer.
Info needed to operate:...

Quick Start Instructions MultiVOIP User Guide
30
Phone/IP Details *Absolutely Needed*  (cont’d)
Gather Telephone Information
➼E1 Phone Parameters
Ask phone company or
PBX maintainer.
Info needed to operate:
MVP3010
E1 Telephony Parameters:
Record for this VOIP Site


• Which frame format is used?  Double Frame_____
MultiFrame w/ CRC4_____
MultiFrame w/ CRC4 modified_____
• Which CAS or PRI protocol is used? ______________
• Clocking: Does the PBX or telco switch use
internal or external clocking?...