Multi-Tech Systems Mvp-2400/2410/3010, Mvp-210/410/810 Voice/ip Gateways User Guide

MultiVOIP User Guide Quick Start Instructions
31
Phone/IP Details Often Needed/Wanted
Obtain Email Address for VOIP (for email call log reporting)
required  if log reports of
VOIP call traffic
 are to be sent by email
Optional
SMTP Parameters
Preparation Task:
Ask Mail Server
administrator to set up
email account (with
password) for the
MultiVOIP unit itself.
Be sure to give a unique
identifier to each
individual MultiVOIP
unit.
Get the IP address of the
mail server computer, as
well.To:  I . T. D e p a...

Quick Start Instructions MultiVOIP User Guide
32
Placement
Mount your MultiVOIP in a safe and convenient location where cables
for your network and phone system are accessible.  Rack-mounting
instructions are in Chapter 3: Mechanical Installation & Cabling.
The Command/Control Computer (Specs & Settings)
The computer used for command and control of the MultiVOIP
(a) must be an IBM-compatible PC,
(b) must use a Microsoft operating system,
(c) must be connected to your local network (Ethernet) system, and...

MultiVOIP User Guide Quick Start Instructions
33
Quick Hookups
Hookup for MVP2410 & MVP3010
Digital Voice
TrunkOl
10 /100RS-232
Ethernet
Command
Cabling to your IP network.
RJ-45 connector.
T1/E1/PRI cabling to your PBX,
and/or to the PSTN.
RJ-45 connector.
On/Off SwitchPower Cable
Receptacle Cabling to computer running
MultiVOIP software.
RJ-45 to serial connector (DB9).Grounding
Screw
T1/E1 MultiVOIP Hookup
(MVP-2410/3010)
Hookup for MVP410 & MVP810
E&MFXS/FXOE&MFXS/ FXO
E&MFXS/ FXO E&MF XS/ FXO
E&MF...

Quick Start Instructions MultiVOIP User Guide
34
Hookup for MVP2400
Power Connection
Command Port Connection
1
0DIGITAL VOICE
TRUNKETHERNET
10/100
RS232 COMMAND
POWER
T1
PBX
PSTN
Telephony Connection
Network Connection


Hub
Hookup for MVP210


	


	
	

	
	
	
		
	
		
	
E&MFXS/FXOFXS/FXORS232
COMMAND 10/100POWER ETHERNET
E&M
	



	
	



 


 
	
 	
 

MultiVOIP User Guide Quick Start Instructions
35
Load MultiVOIP Control Software onto PC
For more details, see Chapter 4: Software Installation.
1. MultiVOIP must be properly cabled.   Power must be turned on.
2. Insert MultiVOIP CD into drive. Allow 10-20 seconds for Autorun to
start.  If Autorun fails, go to
My Computer | CD ROM drive | Open.   Click Autorun icon.
3. At first dialog box, click Install Software.
4. At ‘welcome’ screen, click Next.
5. Follow on-screen instructions.  Accept default...

Quick Start Instructions MultiVOIP User Guide
36
Phone/IP Starter Configuration
Full details here:  
MVP2400
MVP2410
MVP3010Chapter 5: Technical Configuration for
Digital T1/E1 MultiVOIPs
MVP210
MVP410
MVP810Chapter 6: Technical Configuration for
Analog MultiVOIPs
1. Open MultiVOIP program:  Start | MultiVOIP xxx | Configuration.
2. Go to Configuration | IP.  Enter the IP parameters for your voip site.
3. Do you want to configure and operate the MultiVOIP unit using the
web browser GUI? (It has the same...

MultiVOIP User Guide Quick Start Instructions
37
5. Go to Configuration | Voice/Fax.  Select Coder | “Automatic.”  At
the right-hand side of the dialog box, click Default.  If you know any
specific parameter values that will apply to your system, enter them.
Click Copy Channel.  Select Copy to All.  Click Copy.  At main
Voice/Fax Parameters screen, click OK to exit from the dialog box.
6. Enter telephone system information.
Analog MultiVOIPs
MVP-210/410/810
Digital MultiVOIPs
MVP-2400/2410/3010
Go to...

Quick Start Instructions MultiVOIP User Guide
38
Phone/IP Starter Configuration (continued)
9. (continued) Whenever email log messages are sent out, they must
have a standard Subject line.  Something like “Phone Logs for Voip
N” is useful.  If you have more than one MultiVoip unit in the
building, you’ll need a unique identifier for each one (select a useful
name or number for “N”).  In this “Subject” field, enter a useful
subject title for the log messages.
In the “Reply-To Address” field, enter the...

MultiVOIP User Guide Quick Start Instructions
39
Phonebook Starter Configuration (with remote voip)
To do this part of the quick setup, you need to know of another voip
that you can call to conduct a test.  It should be at a remote location,
typically somewhere outside of your building.  You must know the
phone number and IP address for that site.  We are assuming here that
the MultiVOIP will operate in conjunction with a PBX.
You must configure both the Outbound Phonebook and the Inbound
Phonebook.  A...

Quick Start Instructions MultiVOIP User Guide
40
4. Suppose you want to call a phone number outside of your building
using a phone station that is an extension from your PBX system (if
present).  What digits must you dial?  Often a “9” or “8” must be
dialed to “get an outside line” through the PBX (i.e., to connect to the
PSTN).  Generally, “1 “or “11” or “0” must be dialed as a prefix for
calls outside of the calling code area (long-distance calls, national
calls, or international calls).
On a sheet of...