Mitel Sx-2000 Llightware 32, Release 1.0 Technicians Handbook

							Programming
51
Programming
DATASET Printer Port
1. DNI Circuit Assignment form
!Assign DS110x or DS210x against channel #2 of the 
required PLID.
2. Dataset Circuit Descriptor Assignment form
!Create a circuit descriptor.
!Set Device Class = DS1100s or DS2100s.
!Set Defaults = Yes.
3. Dataset Assignment form
!Assign Port = YES against the dataset’s PLID.
!Assign the circuit descriptor to the dataset.
!Assign an interconnect number to the dataset.
4. System Port Assignment form
!Assign a port name to the PLID of the DATASET’s 
output channel (channel #2).
5. Application Logical Port Assignment form
!Assign the port name to each application from which 
you would like to print reports. 
						

							Technician’s Handbook
52
Programming Peripheral Devices
Single Line Telephones
Before You Begin
Program Class of Service, Interconnect Restriction, and 
Intercept Handling (see page 47).
1. System Configuration form
!For standard telephones, add an ONS, ONS 
CLASS/CLIP, or OPS line card.
!For SUPERSET 401+ or SUPERSET 4001 
telephones, add a DNI line card.
2. For SUPERSET 401+ and SUPERSET 4001 
telephones:
DNI Circuit Assignment form
!Program the set type to channel #1 of the circuit.
For standard telephones:
ONS/OPS Circuit Descriptor form
!Change the circuit descriptor contents (if required).
!For OPS circuits, change the transmission parameter 
to LONG.
!For ONS circuits, change the transmission 
parameter to SHORT.
Note:The SUPERSET 401 telephone does not have a 
descriptor. 
						

							Programming
53
Programming
3. Single Line Set Assignment form
!Assign a directory number, circuit descriptor number, 
and interconnect number to the circuit.
4. (Optional) Default Account Code Definition form 
!Create a default account code number that will 
appear in all SMDR records for the station.
5. Station Service Assignment form
!Assign the telephone’s directory number a class of 
service, class of restriction, and intercept number.
!(Optional) Assign a default account code index 
number. 
						

							Technician’s Handbook
54
Analog Devices Connected to an AIM
Before You Begin
Program Class of Service, Interconnect Restriction, and 
Intercept Handling (see page 47).
To program analog devices connected to a Mitel Networks 
5422 Analog Interface Module:
1. System Configuration form
!Program a DNI line card.
2. DNI Circuit Assignment form
!Program set type against channel #1 of the circuit.
!Program the AIM against channel #2 of the circuit.
3. ONS/OPS Circuit Descriptor Assignment form
!Change circuit descriptor contents (if required).
!Change the transmission parameter to SHORT.
4. Single Line Set Assignment form
!Assign a directory number, circuit descriptor number, 
and interconnect number to the circuit.
5. Default Account Code Definition form (Optional)
!Create a default account code number that will 
appear in all SMDR records for the station.
6. Station Service Assignment form
!Assign the telephone’s directory number a Class of 
Service, Class of Restriction, and Intercept Number.
!(Optional) Assign a Default Account Code Index 
Number. 
						

							Programming
55
Programming
Multiline Telephones
Before You Begin
Program Class of Service, Interconnect Restriction, and 
Intercept Handling (see page 47).
1. System Configuration form
!Program a COV or DNI line card.
2. DNI Circuit Assignment form
Note:This step does not apply to SUPERSET 4 telephones.
!Program the set type to channel #1 of the circuit.
!If the telephone connects to a PKM, program the 
PKM to channel #2. If the telephone connects to an 
analog device, program the AIM to channel #2.
If you program the AIM to channel #2, you must also 
program the connected analog devices. See Analog 
Devices Connected to an AIM on page 54.
3. Multiline Set Assignment form
!Program a prime directory number and an 
interconnect number to a line circuit.
4. Multiline Set Key Assignment form (Optional)
!Assign a directory number (line appearance) or 
feature to each key.
!Assign each line appearance a ring type.
5. Multiline Set Group Assignment form (Optional)
!Change the ring type at each telephone where the 
number appears.
!Change the group type from “key system” to 
“multicall” or vice versa. 
						

							Technician’s Handbook
56
6. Default Account Code Definition form (Optional)
!Create a default account code number that will 
appear in all SMDR records for the station.
7. Station Service Assignment form
!Assign the telephone’s directory number a class of 
service, class of restriction, and intercept number.
!(Optional) Assign a default account code index 
number.
Programmable Key Module
The PKM12, PKM48, and Dual PKM are programmed in the 
same way. You can only program the first 12 keys on a 
PKM12.
1. DNI Circuit Assignment form
!Locate the PLID of the device to which the PKM is 
connected.
!Select PKM12, PKM48, or Dual PKM in the 
Channel #2 field.
2. Multiline Set Key Assignment form
!Program the keys.
Upgrade a PKM
To change your PKM12 to PKM48, Dual PKM, or add a 
second PKM48 to a SUPERSET 4025 or SUPERSET 4150:
1. DNI Circuit Assignment form
!Locate the PLID of the PKM-connected device.
!Change the PKM type in the Channel #2 field.
2. Multiline Set Key Assignment form
!Program the additional keys. 
						

							Programming
57
Programming
Attendant Consoles
Before You Begin
Program Class of Service, Interconnect Restriction, and 
Intercept Handling (see page 47).
1. System Configuration form
!Add a DNI line card.
2. DNI Circuit Assignment form
!For a SUPERCONSOLE 1000 or SUPERSET 7000, 
program the set type to channel #1 of a DNI circuit.
!For a SUPERSET 700, program SUPERSET 7 to 
channels #1 and #2 of a DNI circuit.
!For a SUPERCONSOLE 2000, program SC2000 to 
channels #1 and #2 of a DNI circuit.
3. Attendant Assignment form
!Assign a prime directory number to the console 
circuit PLID and a key appearance.
4. Attendant Softkey Assignment form
!Recall the prime directory number of the console.
!Assign directory numbers to the console softkeys 
(key #1 is reserved for recall functions).
5. Telephone Directory form
!Assign names to the console softkey directory 
numbers.
6. (Optional) Default Account Code Definition form 
!Create a default account code number that will 
appear in all SMDR records for the station. 
						

							Technician’s Handbook
58
7. Station Service Assignment form
!Assign the console’s directory number a class of 
service, class of restriction, and intercept number.
!(Optional) Assign a default account code index 
number. 
						

							Programming
59
Programming
Programming the Telephone Directory
Telephone Directory form
!Assign a name to the telephone’s directory number.
!If more than one name is assigned to the same 
telephone number, enter “Y” in the Prime Name field 
to indicate the prime name.
!If the telephone number is not to appear on the 
display of other telephones during a call, enter “Y” in 
the Prv # field.
!(Optional) Assign a department and location name to 
the telephone’s directory number. 
						

							Technician’s Handbook
60
Changing a Telephone’s Attributes
1. Change Attribute Assignment form
!Enter the directory number of the device and recall 
the form.
2. Change any of the following database parameters:
!Department name for the user
!Location of the user
!Default account code index number
!Intercept number
!Interconnect number
!Circuit descriptor
!Class of service and class of restriction
!Maximum number of speedcalls available
!Pickup group number
!Station hotline number
!Associated dataline number
!1st, 2nd, and Always call rerouting numbers
To move a user from one telephone to another, or to 
exchange telephones between two users, use the MOVE 
command, rather than the Change Attribute Assignment 
form. See Moving a Telephone User on page 61.