Mitel Sx 200 Ml Pabx Lightware 16 Instructions Guide

CDE Form Descriptions 
Softkeys 
ACTlVEhNACTlVE: This softkey has two functions. Pressing the ACTIVE softkey 
activates the selected account code entry so that the account code can be used. The 
ACTIVE prompt appears in the ACTIVE field and the softkey now displays the INAC- 
TIVE prompt. Pressing the INACTIVE softkey sets the selected Account Code entry 
to ‘Inactive’ and the account can no longer be accessed. The ACTIVE field now displays 
the INACTIVE prompt and the softkey displays the ACTIVE prompt...

Customer Data Entry 
Form 34 - Directed IO 
4.42 This form allows the user to specify the location of the system printer ports, designate 
the type of printout for each printer, and define whether the printout is guaranteed or 
not (will or will not print). Data outputs such as Traffic Measurement, SMDR, Ho- 
tel/Motel can be routed to any data port with an asynchronous dataset. If no new point 
is specified, printouts continue to default to the system printer RS-232 port. If the 
printer specified is...

CDE Form Descriptions 
Table 4-10 Available Softkeys 
Application Printout Type Options 
Maintenance Logs AUTOPRINT, DIRECTED, MONITOR 
Traffic Measurement 
SMDR AUTOPRINT, DIRECTED 
AUTOPRINT 
CDE Data Print 
Hotel/Motel Wakeup DIRECTED 
AUTOPRINT 
Hotel/Motel Audit 
PMS DIRECTED 
AUTOPRINT 
ACD Agent Summary 
ACD Monitor Print AUTOPRINT 
DIRECTED 
I ACD Group Summary 
I MONITOR 
I , 
MAl* AUTOPRINT 
* If software option is enabled. 
GUARANTEED: This field is only modifiable for SMDR and Data SMDR...

Customer Data Entty 
4-l 14 
DATA SMDR: This softkey defines the printout as a DATA SMDR. DATA SMDR is a 
record of internal data calls. 
ACD AGT SUM: This softkey appears after the MORE softkey has been pressed. 
Available only if system software contains ACD Option. Refer to the 
ACD TELEMARKETER Apphcation Package Practice for further information. 
ACD MONITORS: This softkey appears after the MORE softkey has been pressed. 
Available only if system software contains ACD Option. Refer to the 
ACD...

CDE Form Descriptions 
Form 35 - Global Find Access Code 
4.43 This form lists the access codes in the CDE database, including ARS Leading Digits. 
Callback Busy and Executive Busy Override are excluded, since they can only be 
dialed when receiving busy tone. This form exists to provide access code information 
conveniently to the user. Codes can be assigned, modified or deleted only in the 
appropriate forms. 
16:31 PM 9-JRN-97 
WCESS CODE DEFINED 
BflY SLT CCT SCT MULTIPLE fiPP. 
1801 PBX SUPERSET I...

Customer Data Entry 
NEXT This softkey is displayed when an unassigned number is entered at the ENTER 
ACCESS CODE prompt, and is cancelled. Pressing this softkey displays the next 
access code that follows the one requested. 
The standard softkeys CANCEL, ENTER, TOP, BOTTOM, and QUIT are also provid- 
ed. 
Form 36 - Modem Assignment 
4.44 This form assigns pooled modems to the system database. A pooled modem consists 
of a modem connected to an ONS or OPS circuit and a dataset connected to a digital...

CDE Form Descriptions 
TEN: This column lists the tenant numbers to which the pooled modems are assigned. 
The default tenant number is I. 
DTE: This column lists the optional DTE Descriptor that applies to each pooled modem. 
The DTE Descriptor is needed for incoming or internal modem pooling calls that require 
a DTRX. DTE Descriptors are programmed in the CDE DTE Descriptor Form. 
COS: This column lists the Class of Service (COS) of each pooled modem. The default 
COS is 1. 
COR: This column lists the...

Customer Data Entry 
Form 37 - Guest RM SUPERSE~ Keys Template 
4.45 Form 37 (see Figure 4-53) provides 3 preprogrammed sets (templates) of speed dial 
and feature keys for hotel/motel guest room phones. In each COS, the programmer 
can enable one template which will apply to all SUPERSET 4 70, SUPERSET 420 and 
SUPERSET 430 telephones in that COS that have Room Status Applies enabled. 
6:33 PM 9-JRN-97 alarm status = NO fiLeRM 
TEMPLfiTE 1 1 KEY 1 TVPE 
I SPEED DIRL NUMBER PRIWTE 
02 Speed Dial 
03...

CDE Form Descriptions 
These softkeys are the same ones that appear in the nested Expand Set form of the 
Stations/SUi?E/%X~Telephones form. Refer to Form 09 for more information. 
TEMPLATE NO: Pressing the TEMPLATE NO softkey prompts the user to “ENTER 
TEMPLATE NUMBER:“. Valid template numbers are 1,2 and 3. When a valid template 
number is entered, the new template form is displayed. 
KEY: Pressing this key prompts the user to “ENTER KEY NUM:“. The valid range for 
the key number is 2 - 12. 
PRIVATE:...

Customer Data Entry 
Field Descriptions 
The header lists the ACD position to which the template applies and the template 
number (I, 2 or 3). 
Key: This field lists the line select keys. The keys are numbered on the set from bottom 
to top. Key 01, the prime line key, is not shown because it cannot be reprogrammed. 
Type: This field lists the function of each key. The default is speed dial. 
Speed Dial Number: This field lists the speed dial number for each speed dial key. 
Private: The word ‘Private’...