Mitel Sx 200 Ml Pabx Lightware 16 Instructions Guide

CDE Form Descriptions 
NO ACCESS: Pressing the NO ACCESS softkey restricts form access. The form 
displays the ‘none’ prompt to indicate this state. 
SET PASSWORD: This softkey changes the password for Customer Data Entry. Press- 
ing the SET PASSWORD softkey shows a new softkey display (ATTENDANT, SU- 
PERVISOR, MAlNT2, MAlNTl, and INSTALLER) and the following prompt: SELECT 
LEVEL OF ACCESS:. The user cannot change the password for a level of access 
higher than the current one. 
For example, a user...

Customer Data Entry 
Field Descriptions 
PROFILE NUMBER: This field lists ail the profile numbers 01 to 25. The PROFILE 
NUMBER field cannot be modified. 
NUMBER OF DATA SETS ASSIGNED: This field lists the number of data sets as- 
signed to each profile number. 
COMMENTS: This field is reserved for additional data (a maximum of 20 characters). 
It is stored by the system but not used. 
Softkeys 
PROFILE NUM: The PROFILE NUM softkey allows a user to select a device by num- 
ber. Pressing this softkey...

CDE Form Descriptions 
Field Descriptions 
, The header displays the profile number. 
VALUE: The VALUE field displays the current setting for each option. 
Softkeys 
Some of the softkeys displayed are the alternative settings for the option displayed on 
the command line. Refer to parameters, for details. The following softkeys are contin- 
uously present: TOP, BOTTOM, and QUIT. 
Parameters 
Terminal Type: This parameter is used to determine how the delete character is de- 
fined on a video or...

Customer Data Entty 
ALWAYS: The cLF> will be injected if the  is originated from the DTE or 
DTRX. 
Number of Pads after : This field is used for terminals that require delays after 
a carriage return before receiving printable characters (printers with small or no buff- 
ers). Values entered range from 0 to 7* This option is valid only if echoplex is enabled. 
Number of Pads after cLFx This field is used for terminals that require delays after 
a line feed return before receiving printable characters...

CDE Form Descriptions 
Softkeys 
PROFILE NUM: When this softkey is pressed the command line displays ‘ENTER 
PROFILE NUM:‘. After entering a valid number and pressing the ENTER softkey, the 
screen will display the list of users of that DTE profile, if any. 
The standard softkeys CANCEL, ENTER and QUIT are also provided. 
Form 30 - Device Interconnection Table 
4.37 This form specifies which devices may be connected. See Figure 4-45 for the form 
layout. The system allows a maximum of 25 devices. 
16:16...

Customer Data Entry 
DISALLOW/ALLOW: This softkey has two functions; it enables and disables intercon- 
nection between devices. Pressing the DISALLOW softkey disables the interconnec- 
tion between those two devices unidirectionally. For example, when modifying con- 
nections for device 5 (the command line displays line 5) and the DISALLOW softkey 
is pressed when the cursor is under the sixth column, then device 5 cannot commu- 
nicate with device 6. However, device 6 can still communicate with device...

CDE Form Descriptions 
INTERCONNECT NUM: This field lists all the interconnect numbers; it links this form 
to the previous form (refer to Form 30, Device Interconnection Table). The interconnect 
numbers range from I to 25. The INTERCONNECT NUM field cannot be modified. 
ENTRY NUM: This softkey selects an entry number. Pressing the ENTRY NUM softkey 
displays the ENTER ENTRY NUM: on the command line. The selection is completed 
by entering a valid entry number (I to 25). 
INTERCON NUM: This softkey...

Customer Data Entry 
*9 = Pause for 1 second (for ONS Voice Mail feature) 
** = DTMF digit * 
# = DTMFdigit# 
PRIVATE: This field specifies which entries are private (as indicated by the PRIVATE 
prompt) and which are non-private (as indicated by a blank). 
Softkeys 
FIND INDEX: This softkey selects an index number. Pressing the FIND INDEX softkey 
displays ENTER INDEX NUM: on the command line. The selection is completed by 
entering a valid index number (a maximum of three digits). 
INSERT This softkey...

CDE Form Descriptions 
Field Descriptions 
PRINT OPTION: This field lists the print option numbers for the CDE options that can 
be sent to an output device (a terminal or a printer). There is a maximum of 50 print 
option numbers. The PRINT OPTION field cannot be modified. 
CDE DATA PRINT This field lists the form names associated with the print option 
numbers. Print options with the form name RESERVED are not available. The CDE 
DATA PRINT field cannot be modified. 
Softkeys 
PRINT ALL: This softkey...

Customer Data Entry 
Form 33 - Account Code Entry 
4.41 This form specifies the account codes in the database. If the account codes are veri- 
fied, they are stored in the account code database. Refer to Figure 4-49 for the form 
layout. Refer also to the SQfiof~ Message De&G/ Recording CSMJRj 
Practice. This 
form can only be accessed if System Option 05, Verified Account Codes is enabled. 
6:24 PM 9-JBN-97 alarm status = NO fiLRRM 
fJCCOUN1 CODE cos COR 
RCTIUE 
> < 
l- z- 3- 4- 5- 
6-QUIT 7- 8- 9- 0-...