Mitel Sx 200 Ml Pabx Lightware 16 Instructions Guide

CDE Form Descriptions 
Review Subform (SET APP) for Form 45 
’ 4.56 This form appears when the REVIEW and SET APP softkeys are pressed in the Key 
System Telephones form, or when the REVIEW softkey is pressed in the Expand Set 
Subform for Form 45. This form lists all programmed appearances of the selected ex- 
tension number on other SUPERSET telephones. When entered from the 
Station/SUPE/?SETform, this form displays a list of all programmed appearances of 
the selected extension number. When entered...

Customer Data Entry 
system tenant 
group, PBX SUB-ATT indicates a subattendant for a PBX tenant group, 
and CONSOLE indicates an attendant console. 
KEY: For listed SU/?l3?SE~telephones, the KEY field displays the key number where 
the line appears. 
EXT NUM: This field displays the extension number assigned to a particular 
bay/slot/circuit. 
Softkeys 
TRUNK NUMBER: This softkey selects a trunk, and shows all sets which have ap- 
pearances of it. Pressing this softkey displays ENTER TRUNK NUM: prompt...

CDE Form Descriptions 
3: 15 PN 10-JRN-97  3: 15 PN 10-JRN-97 
[PRGING  [PRGING 
i3roup : il r GROUP : 11 t 
>  > alarm Hatus = NO RLRRH  alarm Hatus = NO RLRRH 
1  1 EXTN  ERTN 8RY  8RY SLT  SLT CCT  CCT COMMENTS  COMMENTS 
3300  3300 e1  Hl 88  88 11  11 <  < 
l-  l- 2-NRHE  2-NRHE 
&QUIT  &QUIT 7-  7- I I 
33m e1 es 11  33QM Bl 88 11 
3-PRGING GROUP h-  3-PRGING GROUP h- 
8-  8- S-EXT  S-EXT NUM  NUM 5-  5- 
e-  e- 
Figure 4-68 Review (Paging Group) Subform Layout 
Softkeys 
NAME: 
Specifies a...

Customer Data Entry 
Form 46 - Key System Toll Control 
4.58 This form serves to verify dialed digits for the CO line key feature. This is similar to, 
but independent from Form 26 (AM: Digit Strings). See Figure 4-69 for the form 
layout. 
710a PM  710a PM 9-Jfw-97  9-JhN-97 alarm status = NO fll-fSW  alarm status = NO flLfiRM 
DIGITS TO BE flNf2L’fZED  DIGITS TO BE flNf2L’fZED QT’f TO FOLLOW LONG DST TERM T’fPE fiND NUtl COR GROUP  QT’f TO FOLLOW LONG DST TERM T’fPE fiND NUtl COR GROUP 
>  > <  < 
l-...

CDE Form Descriptions 
TANCE field. The default condition is no “long distance” management required as 
indicated by the NO prompt. 
UNKNOWN: This softkey appears only when the cursor is at the QTY TO FOLLOW 
field. Pressing the UNKNOWN softkey indicates to the system that the quantity of 
dialed digits AFTER the analyzed digits is unknown. 
INSERT This softkey adds new entries to the form. Pressing the INSERT softkey clears 
the command line and moves the cursor to the DIGITS TO BE ANALYZED field. The...

Customer Data Entry 
4-146 Issue 1 Revision 0 March 1997  

Appendix A 
Programming Error 
Messages 
Table A-l Programming Error Messages 
Error Message 
XXXXX is an ACD agent ID 
XXXXX is an ACD supervisor Meaning 
A supervisor with ACD ID XXXXX, cannot be displayed, 
as requested via the FIND SUPER key, because this ID 
belongs to an agent, not a supervisor. 
The ID entered for the FIND ID key belongs to a senior 
supervisor or supervisor. 
XXXXX already has day zone X specified The selected day already has a day zone specification. 
Only one day zone can be...

Customer Data Entry 
Table A-l Programming Error Messages (continued) 
Error Message 
Access Code XXXXX confJicts with a 
Console Access Code Meaning 
The code entered has already been defined as an 
extension number for a console in Form 07, Console 
Assignments. Select a new code or change the console 
extension number. 
Access Code XXXXX conflicts with the The code entered has already been defined as a feature 
Feature Access Code for FEATURE access code. Select a new code or change the code in...

Appendix A - Programming Error Messages 
Table A-l Programming Error Messages (continued) 
Error Message Meaning 
Access code XXXXX is not a valid answer The following are valid answer points for the DAY, Nl 
point and N2 fields in Form 14, Non-Dial-In Trunks: 
- an LDN on the attendant console, 
- a rotary dial or DTMF set extension number, 
- a SWERSE~ telephone directory number, 
- a hunt group access code or, 
- a night bell extension number. 
Account codes of unspecified lengths exist; Ensure that...

Customer Data Entry 
Table A-l Programming Error Messages (continued) 
Error Message Meaning 
Associated device has a key template An attempt was made to associate a PKM module with 
established in its COS a set that has a key template enabled in its COS. 
Association of SUPERSETDSS or PKM An attempt was made to delete a SUPERSET that has 
Module to SUPfRSETmust be removed one or more PKM modules associated with it. 
Attempting to add invalid access code A PBX PKM may only be associated with a PBX set....