Mitel Sx 200 Ml Pabx Lightware 16 Instructions Guide

Appendix A - Programming Error Messages 
Table A-l Programming Error Messages (continued) 
Error Message Meaning 
Attempting update/delete of a device that is The selected device is being used; modify this device 
currently in use at a later time. 
Automated Attendant hunt group may not An auto attendant hunt group can only contain industry 
contain SUPERSETs standard telephones. 
Bay/Slot/Circuit XX/XX/XX is already The specified bay/slot/circuit is assigned elsewhere. 
assigned Select a new...

Customer Data Entry 
Table A-l Programming Error Messages (continued) 
Error Message Meaning 
Bay/Slot/Circuit - XX/XX/XX is not The selected trunk number corresponds to a 
programmed as a trunk bay/slot/circuit that is not programmed as a trunk. 
Bay/Slot/Circuit - XX/XX/XX is not The selected bay/slot/circuit is not a Universal Card 
programmed as a UNIVERSAL CARD assignment. Refer to Form 01, System Configuration 
and reprogram this bay/slot/circuit as a Universal Card. 
Cannot change tenant grp, if a...

Appendix A - Programming Error Messages 
Table A-l Programming Error Messages (continued) 
Error Message 
COR value is out of range 
COS number must be 1 to 50 
COS value is out of range Meaning 
In Form 32, Customer Data Print, the COR value 
specified must be valid (1 -+ 25 for each COR group). 
There are a maximum of 50 COR groups. Refer to Form 
20, ARS: Class of Restriction Groups. 
Valid range for COS numbers is I to 50. 
In Form 32, Customer Data Print, the COS value 
specified must be valid (1 -+...

Customer Data Entry 
Table A-l Programming Error Messages (continued) 
Error Message 
Entered string is not in the system 
Error in “*” sequences. * 
(1,2,3,4,5,6,7,8,9,*) are the only valid 
sequences Meaning 
In Form 26, ARS Nested Digit Strings, the selected digit 
string is not defined. 
Theasterisksequence in the DIGITSTO BE INSERTED 
field in Form 22, ARS: Modified Digit Table is restricted 
to the following: 
*1 = Pause for 5 seconds, 
*2 = Wait for Dial Tone, 
*3 = Switch to DTMF for subsequent...

Appendix A - Programming Error Messages 
Table A-l Programming Error Messages (continued) 
Error Message 
First digit in Access Code must be ‘*’ 
First digit in digit string cannot be a ‘*’ 
Form access disallowed; enable verified 
account codes system option 
Form number XX cannot be accessed Meaning 
The Key System - Retrieve Personal Speed Call feature 
access code must begin with an asterisk (*). 
This will conflict with the Key System - Retrieve Personal 
Speed Call. If asterisks (*) are required,...

Customer Data Entry 
, Table A-l Programming Error Messages (continued) 
Error Message Meaning 
Maximum Time is 54:OO The user entered a timer out of range. 
Minute value XX is out of range The minute value can range from 01 to XX, where XX 
is option specific. Refer to Form 04, System 
Options/System Timers. 
MODIFIED DIGIT ENTRY out of range The selected entry number is invalid. The range is 1 to 
Valid range is (1 - 50) 50. Refer to Form 22, ARS: Modified Digit Table. 
Modified digit table entries are...

Appendix A - Programming Error Messages 
Table A-l Programming Error Messages (continued) 
Error Message Meaning 
Must delete BLF appearances starting on The user attempted to delete a device which has BLF 
device XXXX before deleting appearances on the specified device. The appearances 
must be deleted first. 
Must delete the appearances of XXXXX on All appearances of the station number (or prime line 
all sets before deleting set number) must be deleted before that set can be 
removed from the system....

Customer Data Entry 
Table A-l Programming Error Messages (continued) 
Error Message 
Option XX conflicts with this option Meaning 
The selected option is mutually exclusive with the option 
number shown. 
Option number XXX is out of range; must The selected option number is out of range. For COS 
be between XXX and XXX Options, the valid range is 100 to 908. For System 
Options, the valid range is 1 to 52. 
Only 1 PER bay is allowed 2 Tl Trunk This message appears if you attempt to program a 
cards, all...

Appendix A - Programming Error Messages 
Table A-1 Programming Error Messages (continued) 
Error Message Meaning 
RTE PLN= X, DZ= X, TZ= X, Field= START The START HOUR field entry is less than or equal to 
HOUR, Error = Entry c = previous entry the previous START HOUR field entry. The entries in 
the START HOUR field must be listed in ascending 
order. Refer to Form 25, ARS: Route Plans. 
RTE PLN= X, DZ= X, TZ= X, Field= START A blank entry in the START HOUR field represents 24 
HOUR, Error= Entry cannot...

Customer Data Entry 
Table A-l Programming Error Messages (continued) 
Error Message Meaning 
TOTAL DIGITS EXPECTED must be in the in Form 15, Dial-In Trunks, the N field (total digits 
range (1-Q) expected) is restricted to digits 1 to 9. (Generic 1004 
and below). 
TOTAL DIGITS EXPECTED must be in the In Form 15, Dial-In Trunks, the N field (total digits 
range (0 - IO) expected) is restricted to digits 0 to 10. 
(L/G/-/TWA/?E only). 
Total string is too long Limit is 26 digits The total number of...