Mitel SX 200 DIGITAL Pabx Shipping, Receiving, And Installation Information Manual

Cdtomer Data Entry (CDE)
TABLE 4-5
PROGRAMMABLE FEATURE ACCESS CODES
NumberFeature Name
::
!4”
:z
iiiD9101112
13
14
15
:;18
:x
E23
$2
28
El29
30
x:33
it36
zi39
40
41
4243
44
45Account Code Access
Auto-Answer Activation
Cal I Forwarding 
- Busy
Call Forwr:rding - Don’t Answer
Call Forwarding - Busy/Don’t Answer
Call Forwarding - Follow Me
Call Forwarding - I’m Here
Dial Call Pickup
Directed Call Pickup
Do Not Disturb
Extension General Attendant Access
Paging Access to Default Zone(s)
Paging Access to...

SECTION MITL9109-094-210-NAForm 03 
- COS Define
4.17This form defines the Classes of Service for the system (refer
to Table 4-6, COS Define for the form layout). Classes of Ser-
vice group together stations with common feature operations and
restrictions. The SX-200 DIGITAL PABX accommodates a maximum of
50 Classes of Service. Each device (including attendants and all trunks)
are supplied with a Class of Service. This provides for the 
multi-attendant environment where one attendant may access the...

Customer Data Entry (CDE)
groups: enabled options and disabled options.
STATUS: This field displays the status of each option; either DISABLED,
ENABLED or a timer value.
OPTION NUM: This field displays the number of each Class of Service
option. The actual option number cannot be modified.
4.19Commands
l-DISABLE/ENABLE: This softkey enables and disables COS options.
The DISABLE 
softkey appears when the form shows the enabled op-
tions. Pressing the DISABLE 
sof-tkey followed by pressing the ENTER...

SECTION MITL9109-094-210-NA
curred. Pressing the CANCEL softkey returns the display to the level
where the programming error was made. The CANCEL 
softkey appears
with an error message. Refer to Table 5-1, Programming Error Mes-
sages for a list of these error messages.
‘I-OPTION NUM: This 
softkey selects a specific COS option. Pressing
the OPTION NUM 
softkey displays the ENTER OPTION NUM: prompt on
the command line. The selection is completed by entering a valid
option number (100 to 908). The command...

Customer Data Entry (CDE)
TABLE 4-7
CLASS-OF-SERVICE OPTIONS
All-ENDANT-RELATED3pt ion NumberClass-of-Service Name
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123Attendant Bell-Off
Attendant O/G Restriction/Room Status Setup
Attendant Display of System Alarms
Attendant 
DISA Code Setup
Attendant Flexible Night Service Setup
Attendant Guest Room Key
Attendant New Call Tone
Attendant Automatic Call Forward 
- No Answer
Attendant Audible Lockout Alarm...

SECTION MITL9109-094-210-NATABLE 4-7 (CONT’D)
CLASS-OF-SERVICE OPTIONS
IOpt ion Number
212
213
214
215216
217
218
219
220
221
222
223224
225
226
227
228
229
230
231232
233
234
235
236
237
I238
239240
241242
243
244
245246
247
248249
250
251
252
253254
255
256
257
258
259
STATIONKUPERSET-RELATED (CCXU’D)Class-of-Service Name
Can Flash if Talking to an Incoming Trunk
Can Flash if Talking to an Outgoing Trunk
Cannot Dial a Trunk After Flashing
Cannot Dial a Trunk If Holding or Conferencing With One
Data...

Customer Data Entry (CDE)
TABLE 4-7 (CONT’D)
CLASS-OF-SERVICE OPTIONSAlXNDANT/STAT I CWSUPERSET-RELATEDOpt ion NumberClass-of-Service Name
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318319
320
321322
323
324
325
326
327
328Automatic Callback
Camp-on
Flash-in Conference
Paging Zone 1 Access
Paging Zone 2 Access
Paging Zone 3 Access
Paging Zone 4 Access
Paging Zone 5 Access
Paging Zone 6 Access
Paging Zone 7 Access
Paging Zone 8 Access
Paging Zone 9 Access
Paging Default (0 
+...

SECTION MITL9109-094-210-NATABLE 4-7 
(CONT’D)CLASS-OF-SERVICE 
OPilONS
AlTENDANT/SUPERSET-RELAT5DOpt i on NumberClass-of-Service Name
500Override
501Override Announce
502RESERVED
503RESERVEDATTENDANT/STAT I DN/SUPERSET-RELATED
Option NumberClass-of-Service Name
600SUPERSET - Auto-Answer601SUPERSET - Auto-Hold Disable
602SUPERSET - Background Music
603SUPERSET -Disconnect Alarm
604SUPERSET - inmediate Line Select
605SUPERSET - Message Program
606SUPERSET - Sub-Attendant
607SUPERSET -Associated Modem...

Customer Data Entry (CDE)
TABLE 4-7 (CONT’D)
CLASS-OF-SERVICE OPTIONSTIUNK-RELATEDOption Number 1Class-of-Service Name
800
801802
803
804
805
808
807
808
809
810
811
812
813
814
ANI Applies
incoming Trunk Call Rotary
Limited Wait For Dial Tone
SMDR -Drop Calls < n Digits (0.. 11, 0 = disable)
SMDR - Drop Incomplete Outgoing Calls
Trunk No Dial Tone Alarm
SMDR 
- Record Incoming CallsRESERVEDSpecial DISAStandard Ring Applies
DISA During Night Service Only
Disable Trunk Conferencing
Loop Start Trunk to...

SECTION MITL9109-094-210-NAForm 04 
- System Options/System Timers
4.20This form specifies the system’s options and timers that are
systemwide. Refer to Table 4-9, System Options and Timers for
the complete list and refer to Table 4-8, System Options/System Tim-
ers for the form layout.
TABLE 4-8
FORM 04 
- SYSTEM OPTIONS/SYSTEM TIMERS
CDE TERMINAL DISPLAY
IO:15 PM 15-JAM-88
alarm status = NO ALARM
System Options (Displaying ENABLED Options)
STATUSOPTION
NwlDiscriminating Ringing
ENABLEDHoliday...