Mitel SX 200 DIGITAL Pabx Shipping, Receiving, And Installation Information Manual

Installation Forms
TABLE 3-20 (CONT’D)
FORM 13x - TRUNK CIRCUIT DESCRIPTOR OPTIONS
SHEET 
_ OF _
SeizeTimer(IO - 60 s) (IO s increments)
Interdigit Timer (300 
- 800 ms) (100 ms inc)
Notes: 1. 
* This form is a nested form and can only be accessed from Form 13 (Trunk Circuit
Descriptors), via the SEL. OPTIONS softkeys.
2. Specify the hardware options for the selected trunk circuit descriptor number. The
options can be specified only after a trunk type has been assigned to a trunk circuit
descriptor...

SECTION MITL9109-094-206-NATABLE 3-21
FORM 14 
- NON-DIAL-IN TRUNKS
SHEET 
_ OF _BAY SLT CCT COS TEN DAY 
NlN2 CDN TK NUM TK NAME COMMENTS
Notes: 1.
2.
3.
4.
5.
Specify the COS number, Tenant Group number and the trunk number (1 - 200).
Specify the answer points for Day, Nightl, and Night2 Service Modes. The answer points
may be specified as an LDN on the Attendant Console, a station number (or a 
SUPERSETtelephone Prime Line number), a Hunt Group Access Code or a Night Bell equipment
extension number....

Installation Forms
TABLE 3-22
FORM 15 - DIAL-IN TRUNKS
SHEET 
_ OF _Notes: 1. Specify COS number, COR number, Tenant Group number and the trunk number (1 
-
200).2. Assign a trunk circuit descriptor number in the CDN field for each Dial-In Trunk. The
CDN field links this form to Form 13, Trunk Circuit Descriptors which defines the trunk
hardware parameters.
3. Specify the number of expected digits (1 to g), if required, in the N field. Digit translation
on incoming calls occurs after the system receives...

SECTION MITL9109-094-206-NATABLE 3-23
FORM 16 
- TRUNK GROUPS
Trunk Group Function:
SHEET 
_ OF _1 TRUNK GROUP NUMBER (1 
- 50):ITRUNK GROUP NAME:IHUNTING (TERMINAL/CIRCULAR):1 SMDR 
(YIN):6TRUNK NUMBERS
Trunk Group Function:1 TRUNK GROUP NUMBER (1 
- 50):1 TRUNK GROUP NAME:1 HUNTING (TERMINAL/CIRCULAR):1 SMDR (Y/N):
INotes: 1. There are maximum of 50 members per Trunk Group and the system supports a
maximum of 50 Trunk Groups.
2. Specify each member of the Trunk Group by trunk number. Trunk Group...

Installation Forms
TABLE 3-24
FORM 17 - HUNT GROUPS
Hunt Group Function:
SHEET 
_ OF _
IIIIIIIIHunt Group Function:
HUNT GROUP NUMBER (1 
- 50):
HUNTING (TERMINAL/CIRCULAR):ACCESS CODE :
OVERFLOW :1 HUNT GROUP TYPE:
IIII IIIIIINotes: 1. There are a maximum of 50 members per Hunt Group; the system supports a maximum
of 50 Hunt Groups.
2. Specify an Access Code for the Hunt Group.3. Specify each member of the Hunt Group by extension number. Hunting occurs in the
order that the members are entered.
4....

SECTION MITL9109-094-206-NATABLE 3-25
FORM 18 
- MISCELLANEOUS SYSTEM PORTS
Page 50 

Installation Forms
TABLE 3-25 (CONT’D)FORM 18 
- MlSCELLANEbUS SYkTEM PORTS
Notes: 1. Specify the physical location (bay, slot, circuit and subcircuit numbers) of the miscella-
neous devices.2. Specification of the extension numbers is only required for the Night Bell relays. Night
Bell definitions are restricted to Universal Card slots.
3. The subcircuit (SCT) fields for the music on hold module and the nine paging zones will
be filled in by the system.Page 51 

SECTION MITL9109-094-206-NATABLE 3-26
FORM 19 
- CALL REROUTING TABLE
SHEET 
_ OF _TENANT GROUP (1 
- 25):Tenant Name:
TYPE OF CALL.DAY NlN2
Station Dial 0 Routing
Priority Dial 0 RoutingDID Recall Points On 
Busv
DID Recall Points On No Answer
DID Routing For Calls Into This Tenant
DID Intercept Routing For Calls Into This Tenant
DID Vacant Number Routing For This Tenant
DID Attendant Night Access Points
Non-Dial-In Trunks Alternate Recall Points
Dial-In Tie Recall Points On Busy1 Dial-In Tie Recall...

Installation Forms
TABLE 3-27
FORM 20 - ARS: COR GROUP DEFINITION
SHEET 
_ OF _COR GROUP NUMBER (1 
- 50):
COR GROUP MEMBERS (Enter the COR numbers of the denied devices below)
COMMENTS:
COR GROUP NUMBER (1 
4 50):
COR GROUP MEMBERS (Enter the COR numbers of the denied devices below)1 COMMENTS:
I1 COR GROUP NUMBER (1 
- 50):I
I COR GROUP MEMBERS (Enter the COR numbers of the denied devices below)1 COMMENTS:
I
Notes: 1.
2.
3.
4.The system supports a maximum of 50 COR Groups numbered 1 
- 50.
Each COR...

SECTION MITL9109-094-206-NATABLE 3-28
FORM 21 
- ARS: DAY ZONE DEFINITION
DAY ZONEMON.TUE.WED.
THU.
FRI.SAT.SUN.
01
02
03Notes: 1. Specify a Day Zone for each day of the week with an asterisk 
(*).2. Only one Day Zone can be assigned to each day.
3.A Day Zone must be assigned to each day of the week before this form can be saved.
Page 54