Mitel SX 200 DIGITAL Pabx Shipping, Receiving, And Installation Information Manual

Installation Forms
TABLE 3-6 (CONT’D)
FORM 02 - FEATURE ACCESS CODES
Notes: 1. Specify the Feature Access Code in the Assigned Access Code column.
2. Feature Access Codes can be a maximum of five digits (except for the Callback Busy
Access Code and the Executive Busy Override Access Code which are only one digit).
3. Feature Access Codes cannot conflict with extension numbers or other access codes,
For example, there cannot be a Feature Access code 18 and extension numbers 1801,
1802, etc.Page 15 

SECTION MITL9109-094-206-NATABLE 3-7
FORM 03 
- CLASS-OF-SERVICE OPTIONS
SHEET OF
Class-of-Service OptionName
109
110
111
112
113Attendant Serial Call
Attendant Abbreviated Dialing Confidential
Number Display
Attendant Abbreviated Dial Programming
Attendant Station Busy-Out
Attendant Call Block Key
IIIIIIII1141 Attendant Trunk Busv-OutIIIII1
115
116
117
118
119
120Attendant-Timed Recall (NO ANSWER)
10 -240Seconds (Default 30 s)Attendant-Timed Recall (HOLD)
10 
-240Seconds (Default 30 s)Attendant-Timed...

Installation Forms
TABLE 3-7 (CONT’D)
FORM 03 - CLASS-OF-SERVICE OPTIONS
ISHEET 
_ OF _
STATION/SlJPERSET- RELATED (CONT’D)1Option
NumberClass-of-Service Option NameClass-of-Service Number (1 
- 50)
-1 I-2 I-3 ) -4 I-5 I-6 I-7 I-6 I-9 I-0Class-of-Service Status
214Cannot Dial a Trunk After Flashing
215Cannot Dial a Trunk if Holding or Conferencing
with One
216Data 
SecuritvIIIIIPage 17 

SECTION MITLSI 09-094-206-NATABLE 3-7 (CONT’D)
FORM 03 
- CLASS-OF-SERVICE OPTIONS
SHEET 
_ OF _Default Paging Zone 
(0 - 9)Page 18 

installation Forms
TABLE 3-7 (CONT’D)
FORM 03 - CLASS-OF-SERVICE OPTIONS
SHEET OF
501Override Announce
SUPERSET -MessageProgram
652
653ACD 
- Supervisor Template (0 - 3, 0 = disable)
ACD 
- Senior Supervisor Template(0 - 3, 0 = disable)
ACD 
- Agent Always Auto-Answer
Page 19 

SECTION MITL9109-094-206-NATABLE 3-7 (CONT’D)
FORM 03 
- CLASS-OF-SERVICE OPTIONS
SHEET 
_ OF _DATA STATIONS-RELATED
1Class-of-Service Number (1 
- 50)
Option
NumberClass-of-Service Option Name
-1 I-2 I-3 I-4 I-5 I-6 I-7 I-8 I-9 I-0Class-of-Service Status
IIALL DEVICES
700SMDR 
- Does Not Apply
701No Dial Tone
702
703704SMDR 
- Overwrite Buffer
Message Register Applies
Incoming/Internal Modem Pooling Access
TRUNK-RELATED
800
ANI Applies
801Incoming Trunk Call Rotary
802Limited Wait For Dial Tone
803SMDR...

Installation Forms
TABLE 3-8
FORM 04 - SYSTEM OPTIONS/SYSTEM TIMERS
IOption No.1 System Options/System Timers 1 Status 1System Options/System Timers
I’“’24 Hour ClockII361 381 Switch-hook Flash
PI
I09Attendant Call Block
I10I Attendant Conference BeepsII
11Automatic Wake-Up
12Automatic Wake-up Alarm
13Automatic Wake-up Print
I14I Automatic Wake-up MusicI-7
~Discriminating Ringing 
Alwavs
I 48ILimited Wait for Dial Tone
1 - 15 seconds
I 4gIPseudo-Answer Supervision
Timer 10 - 60 secondsI20I Holiday...

SECTION MITL9109-094-206-NATABLE 3-9
FORM 05 
- TENANT INTERCONNECTION TABLE
TENANT01 02 03 04 05 06 07 08 09 
IO 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
NAME
01 --
- 
--’02 --
03--
04--
05--
06--
07--
08--
09--
IO--
11--
12--
13--
14--
15--
16--
17--
18--
19--
20--
21--
22--
23--
24--
25--
Notes: 1. Specify all inhibited connections with an X (indicated by a period on the CRT). Tenant
Group interconnection is inhibited unidirectionally. For example, an X in row 21 column
1 prevents Tenant Group 21...

Installation Forms
TABLE 3-10
FORM 06 - TENANT NIGHT SWITCHING CONTROL
Notes: 1.
2.
3.‘01 02 03 04 05 06 07 08 08 10
Specify with an X those Tenant Groups allowed to switch into Night Service simulta-
neously (indicated by an asterisk on the CRT). For example, an X in row 10 column 1
allows Tenant Group 10 to switch both Tenant Groups 10 and 1 into Night Service
simultaneously, but Tenant Group 1 can only switch itself into Night Service.
On initialization, the system defaults to Tenant Groups switching...

SECTION MITL9109-094-206-NATABLE 3-l 1
FORM 07 
- CONSOLE ASSIGNMENTS
Notes: 1.
2.
3.
4.
5.There are a maximum of 11 consoles. The Attendant Console default location is Bay 2,
Slot 3, Circuit 1 on 336, 456 and 
480-port systems; on 672-pot-t systems it is Bay 1, Slot
5, Circuit 2. This Attendant Console is required if the VT-100 compatible terminal is not
used for Customer Data Entry.
Specify the physical location (bay, slot and circuit) of each console.
Specify the extension number of each console....