Mitel SX-200 DIGITAL Pabx Information Manual

Customer Data Entry (CDE) 
4.110 Commands 
2-FIND INDEX This softkey selects an Index Number. Pressing the 
FIND INDEX softkey displays ENTER INDEX NUM: on the command 
line. The selection is completed by entering a valid Index Number (a 
maximum of three digits). 
3-INSERT This softkey adds new digit strings to this form. Pressing 
the INSERT softkey clears the command line and moves the cursor to 
the INDEX NUMBER field. The addition is completed by entering a valid 
extension number. The system...

Customer Data Entry (CDE) 
Form 31 - Customer Data Print 
4.111 This form lists all the Customer Data options that can be sent 
to an output device, such as a printer or a terminal. The options 
are selected by Print Option Number. Note that this form cannot be 
modified. Refer to Table 4-42. Customer Data Print Options for a 
complete list of these options and to Table 4-43, Form 31 - Customer 
Data Print for the form layout. 
4.112 Field Description 
PRINT OPTION Field This field lists the print option...

Customer Data Entry (CDE) 
TABLE 4-42 
CUSTOMER DATA PRINT OPTIONS 
Number Customer Data Print Option 
01 
System Configuration 
02 Feature Access Codes 
03 COS Definition 
04 System Options/System Timers 
05 Tenant Interconnection Table 
06 Tenant Night Switching 
07 Console Assignments 
08 Attendant LDN Assignments 
09 Station/SUPERSET Sets 
09” SUPERSET/Line Appearances 
10 Pickup Groups 
11 RESERVED 
12 RESERVED 
13 Trunk Circuit Descriptors 
13x Trunk Circuit Descriptor Reviews 
14 Non-Dial-In...

Customer Data Entry (CDE) 
TABLE 4-43 
FORM 31 - CUSTOMER DATA PRINT 
CDE TERMINAL DISPLAY 
: 26 1 -&IN-86 alarm status = NO ALARM 
PRINT OPTION 
I CDE DATA PRINT 
01 System Configuration 
02 Feature Access Codes 
03 COS Definition 
04 System Options/System Timers 
05 Tenant Interconnection Table 
06 Tenant Night Switching 
07 Console Assignments 
08 Attendant LDN Asslgnments 
09 Station/SUPERSET Sets 
os* SUPERSET Line Appearances 
10 Pickup Groups 
ii RESERVED 
l- 
6- 01 System Configuration 
2- 3-...

Customer Data Entry (CDE) 
4.113 Commands 
4-TOP Pressing the TOP softkey moves the line pointer to the first 
line of the form. The command line displays the first line. 
5-BOTTOM Pressing the BOTTOM softkey moves the line pointer to 
the last line of the form. The command line displays this line. 
6-QUIT Pressing the QUIT softkey during a print operation halts that 
process and displays the following message on the command line: 
CDE DATA PRINT OPTION XX HAS BEEN ABORTED where XX is the 
Print Option...

Customer Data Entry (CDE) 
Form 32 - Account Code Entry 
4.114 
This form specifies the Account Codes in the database. If the 
Account Codes are verified, they are stored in the Account 
Code database and recorded on SMDR. If they are not verified, then 
they are only recorded on SMDR. Refer to Table 4-44, Form 32 - 
Account Code Entry for the form layout. Refer also the Section 
MITL9108-093-451-NA, Station Message Detail Recording (SMDR). 
Note that this form can only be accessed if System Option 04,...

Customer Data Entry (CDE) 
:26 1 -3UN-86 
TABLE 4-44 
FORM 32 - ACCOUNT CODE ENTRY 
CDE TERMINAL DISPLAY 
alarm status = NO ALARM 
ACCOUNT CODE 
123456 
345678 
445679 
123456 
1 I 
I 
I I 
l- 
I 2-NULL COS I3-INSERT 1 J-TOP 
I I 
6-QUIT 
7-DELETE RANGE 8-DELETE g-FIND 
O- 
cos COR 
1 1 
3 
2 ACTIVE 
ACT1 VE 
INACTIVE 
ACTIVE 
ACTIVE 
I 5-BOTTOM 
ATTENDANT CONSOLE DISPLAY 
ACCOUNT CODE 
cos COR 
123456 1 
1 
Fl> 
F2hkJLL COS FB>INSERT 
F4>TOP 
FGXYJIT F7>DELETE RANGE FS>DELETE 
FS>FIND ACTIVE 
ACTIVE...

Customer Data Entry (CDE) 
4.116 Commands 
l-ACTIVE/INACTIVE This softkey has two functions. Pressing the 
ACTIVE softkey sets the selected Account Code entry to Active; that 
Account Code can now be accessed. The ACTIVE prompt appears in 
the ACTIVE field and the softkey now displays the INACTIVE prompt. 
Pressing the INACTIVE softkey sets the selected Account Code entry to 
Inactive; that Account Code can no longer be accessed. The ACTIVE 
field now displays the INACTIVE prompt and the softkey displays...

Customer Data Entry (CDE) 
including these specified Account Codes are removed from the form. 
8-DELETE This softkey appears when the pointer is pointing to data 
(i.e., data on the command line). Pressing the DELETE softkey removes 
the data from the selected field. The deletion is completed by pressing 
the ENTER softkey. 
O-FIND This softkey selects an Account Code and appears only when 
there is data in the form. Pressing the FIND softkey displays the 
ENTER ACCOUNT CODE: prompt on the command line....

Customer Data Entry (CDE) 
TABLE 4-45 
PROGRAMMING ERROR MESSAGES 
Error Message Meaning 
KXXX already has day zone X specified The selected day already has a day zone 
specification. Only one day zone can be specified to 
each day. Refer to Form 25, ARS: Route Plans. 
KXXX has no zone specified All days of the week must have a day zone 
specification. 
L3 must be followed by 01 to 14 In Form 30, System Abbreviated Dial Entry, the “*3” 
indicates that the subsequent digits will be manually 
dialed. The...