Mitel SX-200 DIGITAL Pabx Information Manual

Customer Data Entry (CDE) 
TABLE 4-28 
CALL REROUTING OPTIONS 
Call Type 
Station Dial 0 Routing 
Priority Dial 0 Routing 
DID Recall Points on Busy 
DID Recall Points on No Answer 
DID Routing for Calls into this Tenant 
DID Intercept Routing for Calls into this Tenant 
DID Vacant Number Routing for this Tenant 
DID Attendant Night Access Points 
Non-Dial-In Trunks Alternate Recall Points 
Dial-In Tie Recall Points on Busy 
Dial-In Tie Recall Points on No Answer 
Dial-In Tie Routing for Calls into this...

Customer Data Entry (CDE) 
TABLE 4-29 
FORM 19 - CALL 
REROUTING TABLE 
CDE TERMINAL DISPLAY 
1 -&N-86 
alarm status = NO ALAR 
DAY Nl N2  [TENANT : I] ‘TYPE OF CALL 
Station Dial 0 Routing 
Priority Dial 0 Routing 
DID Recall Points On Busy 
DID Recall Points On No Answer 
DID Routing For Calls 
Into fhis Tenant 
DID Intercept Routing For Calls Into This Tenant 
DID Vacant Number Routing For This Tenant 
DID Attendant Night Access Points 
Non-Dial-In Trunks Alternate Recall Points 
Dial-In Tie Recall...

Customer Data Entry (CDE) 
4.74 Commands 
4-TOP Pressing the TOP softkey moves the line pointer to the first 
line of the form. The command line displays the first line. 
5-BOTTOM Pressing the BOTTOM softkey moves the line pointer to 
the last line of the form. The command line displays this line. 
6-QUIT Pressing the QUIT softkey when editing this form returns the 
display to the level before the field was modified. The change is not 
saved. At all other times, pressing this softkey exits Form 19 and...

Customer Data Entry (CDE) 
Form 20 - ARS: COR Group Definition 
4.75 Class of Restriction groups together users with the same out- 
side call capabilities. A COR is assigned to each Attendant 
Console, station, SUPERSET@ set and Dial-In Trunk. This form specifies 
the Class-of-Restriction (COR) Group members. Refer to Table 4-30, 
ARS: COR Group Definition for the form layout. The system supports a 
maximum of 50 COR Groups with up to 25 CORs per group. Each COR 
Group specifies by COR number those...

Customer Data Entry (CDE) 
4:26 I -&N-86 alarm status = NO ALARM 
TABLE 4-30 
FORM 20 - ARS: COR GROUP DEFINITION 
CDE TERMINAL DISPLAY 
ZOR GROUP COR GROUP MEMBERS (SEPARATE WITH SPACES) COMMENTS 
01 15 18 20-22 LONG DISTANCE - DDD 
02 1-12 WATS BAND 2 ACCESS 
03 5 7 13 
04 
05 
06 
07 
08 
09 
10 
ii 
12 
01 15 18 20-22 
l- 2- 
S-QUIT 7-COR GROUP LONG DISTANCE - DDD 
3- 4-TOP 5-BOTTOM 
a-DELETE 9- 
O- 
ATTENDANT CONSOLE DISPLAY 
COR GROUP coR GROUP MEMBERS (SEPARATE WITH SPACES) COMMENTS 
01 15 18...

Customer Data Entry (CDE) 
4.77 Commands 
4-TOP Pressing the TOP softkey moves the line pointer to the first 
line of the form. The command line displays the first line. 
B-BOTTOM Pressing the BOTTOM softkey moves the line pointer to 
the last line of the form. The command line displays this line. 
6-QUIT Pressing the QUIT softkey when editing this form returns the 
display to the level before the field was modified. The change is not 
saved. At all other times, pressing this softkey exits Form 20 and...

Customer Data Entry (CDE) 
Form 21 - ARS: Day Zone Definition 
4.78 This form defines the day zones for each day of the week, 
There are a maximum of three day zones. Note that all days of 
the week must have a zone specification before this form can be 
saved. Refer to Table 4-31, ARS: Day Zone Definition for the form 
layout. 
4.79 Field Description 
DAY ZONE Field 
This field lists the day zones for the system. Pressing 
the up and down arrow keys select different day zones. Note that this 
field...

Customer Data Entry (CDE) 
TABLE 4-31 
FORM 21 - ARS: DAY ZONE DEFINITION 
CDE TERMINAL DISPLAY 
4 : 26 I -&N-86 
alarm status = NO ALARM 
I DAY ZONE 
I MOC J. 1 TUE. 1 WED. 1 THU. 1 FRI. 1 SAT. 1 SUN. 1 I 
J 
01 * * * * * 
02 * * 
03 
01 * * * * t 
1 -ENABLE 2- 3- 4- 5- 
6-QUIT 
7- 8-DELETE S- O- 
ATTENDANT CONSOLE DISPLAY 
DAY ZONE MON. TUE. 
WED. THU. FRI. SAT. SUN. 
01 * * * 
* * 
F 1 >ENABLE F2> F3> F42 
F5> 
FGHJUIT 
F7> F8>OELETE F9> 
FO> 
Page 4-92  

Customer Data Entry (CDE) 
4.80 Commands 
l-ENABLE/DISABLE This softkey has two functions; it enables and 
disables the day zone specification for each day. Pressing the ENABLE 
softkey sets the selected day to the day zone that is displayed on the 
command line. The form displays an asterisk (*) in the selected day 
field opposite the chosen day zone. When the cursor-is at an asterisk, 
this softkey displays DISABLE. Pressing the DISABLE softkey removes 
that day specification from the selected day...

Customer Data Entry (CDE) 
Form 22 - ARS: Modified Digit Table 
4.81 This form specifies those digits that modify the user-dialed 
digits. The digit modification prepares the dialed digits for dial- 
ing out on certain trunks such as FX, TIE and WATS. Refer to Section 
MITL9108-093-220-NA, Automatic Route Selection and Toll Control for 
details. Refer to Table 4-32, AR!? Modified Digit Table for the form 
layout. 
4.82 Field Description 
ENTRY NUM Field 
This field lists the entry numbers. There are a...