Mitel SX-200 DIGITAL Pabx Information Manual

Customer Data Entry (CDE) 
Form 08 - Attendant LDN Assignments 
4.33 This form specifies the LDN assignments for the consoles (refer 
to Table 4-13, Attendant LDN Assignments). A maximum of nine 
LDN assignments can be programmed for each Attendant Console. The 
attendant LDNs are assigned to the softkeys. Console softkey 1 is 
reserved for the RECALL function. Each LDN assignment is identified by 
a directory number. The directory numbers are subject to the same 
constraints as all Listed Directory...

Customer Data Entry (CDE) 
~~ ‘TABLE 4-13 
FORM 08. - AHENDANTLDN ASSIQNMENTS t. 
CDE 
TERMINAL DISPLAY 
:26 I -JUN-86 alarm status = ND ALARE 
[BAY/SLT/CCT :Oi-08-021 KEY DIR NUMBER LABEL COMMENTS 
2 111 INTERNAL 
3 0 DIAL 0 
4 222 LDN 2 
5 223 LDN 3 
6 224 LDN 4 
7 225 LDN 5 
8 226 LDN 6 
9 227 LDN 7 
0 228 LDN 8 
2 111 INTERNAL 
i- 2- 3- 4-TOP 5-BOTTOM 
6-QUIT 
7-BAY/SLT/CCT a-DELETE 9- 
O- 
ATTENDANT CONSOLE DISPLAY 
rBAy/SLT/CCT :Ol-08-021 KEY DIR NUMBER LABEL COMMENTS 
2 111 INTERNAL 
Fl> F2> 
F3>...

Customer Data Entry (CDE) 
4.35 Commands 
4-TOP Pressing the TOP softkey moves the line pointer to the first 
line of the form. The command line displays the first line. 
5-BOTTOM Pressing the BOTTOM softkey moves the line pointer to 
the last line of the form. The command line displays this line. 
6-QUIT Pressing the QUIT softkey when editing this form returns the 
display to the level before the field was modified. The change is not 
saved. At all other times, pressing this softkey exits Form 08 and...

Customer Data Entry (CDE) 
Form 09 - Station/SUPERSET@ Sets 
4.36 This form assigns stations and SUPERSET@ sets to the system. 
Refer to Table 4-14, Station/SUPERSET@ Sets. It also specifies 
the parameters for these devices. These parameters include COS, COR 
and Tenant Group assignments. Extension numbers are a maximum of 
five digits. Only level conflicts are permitted. For example, both “4” and 
“414” are valid as extension numbers. 
4.37 Field Description 
BAY, SLOT and CCT Fields 
These fields list...

Customer Data Entry (CDE) 
TABLE 4-14 
1. FORM 09 
- STATION/SUPERSETB SETS 
CDE TERMINAL DISPLAY 
4:26 1 -JUN-86 alarm status = NO ALARM 
BAY SLOT CCT TEN EXT NUM COS COR TYP 
ANNOUNCE BLF COMMENTS 
1 1 01 1 111 1 1 Set M. SMITH 
1 1 02 I 112 I I Set J. DOE 
1 I 03 1 113 1 1 set M. WILLIAMS 
I I 04 I 114 1 1 Set 5. BROWN 
I 1 05 I 115 1 I Set M. BLANC 
1 I 06 1 116 1 1 Set L. GREENE 
1 1 07 1 117 1 1 Set L. JOHNSON 
I 1 08 I 118 I 1 Set 
G. WHITE I 2 01 I 101 1 1 Stn R. FOX 
1 
2 02 1 102 I 1 Stn J....

Customer Data Entry (CDE) 
4.38 Commands 
P-FIND EXT This softkey selects a device by its extension number. 
Pressing the FIND EXT softkey displays the ENTER EXTENSION NUM: 
prompt on the command line. The selection is completed by entering 
an extension number of a station or the Prime Line number of a 
SUPERSET@ set. The selected device information appears on the com- 
mand line. 
3-EXPAND SET Pressing this softkey displays a new form. Refer to 
Table 4-15, SUPERSET@ Set Lines. Note: This softkey is...

Customer Data Entry (CDE) 
the selected device from Form 10 (Pickup Groups) and Form 17 (Hunt 
Groups). 
O-REVIEW Pressing the REVIEW softkey displays a new form (refer to 
Table 4-16, Review List for Form 09). This form lists all programmed 
appearances of the selected extension number (or the Prime Line 
number) on other SUPERSET’ sets. 
O-ENTER This softkey appears only after data for an entry has been 
modified. Pressing the ENTER softkey stores the data corresponding to 
the selected physical...

Customer Data Entry (CDE) 
SUPERSET@ Set Lines 
4.39 This form appears when the EXPAND SET softkey from the 
previous form (Table 4-14, Station/SUPERSET@ Sets) is pressed 
and is reserved for the programming of SUPERSET@ sets. Refer to 
Table 4-15, SUPERSET@ Set Lines for the form layout. 
4.40 Field Description 
KEY Field This field lists the SUPERSET@ set Line Select key numbers 
and cannot be modified. 
TYPE Field When the cursor is at the TYPE field on the command line, 
the softkeys display five...

Customer Data Entry (CDE) 
that the RING field cannot be set to Immediate or Delay Ring if the 
DIRECTION field is set to Outgoing Only. Refer to Section 
MITL9108-093-106-NA, SUPERSET 3TM Set Information and Section 
MITL9108-093-107-NA, SUPERSET qTM Set Information. 
I-IMMED RING 2-DELAY RING 
3-NO RING 4- 5- 
6-QUIT 7-KEY 
8-DELETE 
g-REV1 EW O- 
FIGURE 4-B RING TYPES FORM0099RO 
SECRETARIAL Field When the cursor is at the SECRETARIAL field on 
the command line, and when the TYPE field is set to a...