Mitel SX-200 DIGITAL Pabx Information Manual

Shipping, Receiving, And Installation Information 
CHART 5-22 
Step 
1. 
SET CO TRUNK CARD SWITCHES (TYPES -01 l/l 11) 
Action 
Comments 
CAUTION NOTE 
FOLLOW THE PROCEDURES OUTLINED IN Complete installation forms for 
PARAGRAPH 5.03 WHILE HANDLING PRINTED trunk card switch settings before 
CIRCUIT CARDS OR MODULES. 
setting switches. 
Identify trunk circuit by card position, type, 
and circuit number. 
2. While wearing the antistatic wrist strap, 
remove the card from its package or from 
the equipment...

Shipping, Receiving, And Installation Information 
TRUNK 1 
LOOPpg., cl TRUNK 2 GRouND 
- I 
i IA 
(NOTE 4) c 
n TRUNK CONTROL SWITCHES 
PROM 
TRUNK 3 
- 
El 
TRUNK 4 
El q 
LOOP GROUND 
START SWITCHES 
(NOTE 6) 
q 
NON-MODULAR TYPE ’ 
(NOTES 1 AND 2) 
/TRUNK BUSV“ . 
SWITCHES 
‘1 TRUNK 1 
TRUNK 2 
OUTGOING 
TRUNK 3 
TRUNK 4 
i TRUNK 1 
TRUNK 2 
INCOMING 
TRIJNK 3 
TRUNK 4 
BUSY IDLE 
NORMAL OPERATION HAS 
OUTGOING SWITCHES SET 
TO IDLE AND INCOMING 
SWITCHES SET TO BUSY. TRUNK SWITCHES ON REVERSE OF...

Shipping, Receiving, And Installation Information 
NOTES TO FIGURE 5-25 
CO TRUNK CARD TYPES 9110-011 AND -111 
TRUNK BUSY SWITCHES 
1. OUTGOING BUSY SWITCHES (1 PER TRUNK) CAN BE 
SET FOR EITHER: 
IDLE - NORMAL TRUNK OPERATION 
BUSY - TRUNK CANNOT BE SEIZED FOR 
OUTGOING CALL. 
2. THE “OUTGOING BUSY” CONDITION MAY BE SET 
EITHER BY THE OUTGOING BUSY SWITCH (NOTE I), 
OR BY THE CONSOLE “TRUNK BUSY OUT” FUNCTION. 
WHEN THIS CONDITION IS IN EFFECT THE INCOMING 
BUSY SWITCH AFFECTS THE TRUNK CONDITION AS...

Shipping, Receiving, And Installation Information 
CHART 5-23 
SET CO TRUNK CARD SWITCHES (TYPES -211/311) 
Step 
1. 
2. 
3. 
4. 
5. 
6. 
7. 
8. 
9. 
Action Comments 
CAUTION NOTE 
FOLLOW THE PROCEDURES OUTLINED IN 
PARAGRAPH 5.03 WHILE HANDLING PRINTED 
CIRCUIT CARDS OR MODULES. Complete installation forms for 
trunk card switch settings before 
setting switches. 
Attach antistatic wrist strap to your wrist. 
Identify the trunk circuit by card position, 
type, and circuit. 
Set the Trunk Busy switches...

Shipping, Receiving, And Installation Information 
I TRUNK 1 
pilq 
TRUNK 2 TR2 TRI 
Fhiij 
8 
TRUNK BUSY 
SWITCHES 
HIGH IMPEDANCE SWITCHES 
TRUNK BUSY SWITCHES (NOTES 1 AND 2) 
I 
‘.‘CO~:““( +jTRuNK 2p ( 
CLOSED 
CLOSED 
CLOSED 
CLOSED 
OPEN 
CLOSED 
CLOSED 
CLOSED 
CLOSED 
CLOSED 1 
2 
3 
4 
5 
6 
7 
8 
9 
10 OUTGOING 
IDLE 
INCORnING 
IDLE NORMAL 
SETTING 
1 = OPEN 
2 = OPEN 
3 = OPEN 
4 = OPEN 
5 = CLOSED 
6 = CLOSED 
7 = CLOSED 
8 = CLOSED 
TRUNK CONTROL SWITCHES 
NORMAL SWITCH 
SETTING .NUMBER...

Shipping, Receiving, And Installation information 
NOTES FOR FIGURE 5-26 
CO TRUNK CARD SWITCH FUNCTIONS 
TRUNK BUSY SWITCHES 
1. OUTGOING BUSY SWITCHES (1 PER TRUNK) CAN BE 
SET FOR EITHER: 
IDLE - NORMAL TRUNK OPERATION 
BUSY - TRUNK CANNOT BE SEIZED FOR 
OUTGOING CALL. 
2. THE “OUTGOING BUSY” CONDITION MAY BE SET 
EITHER BY THE OUTGOING BUSY SWITCH (NOTE I), 
OR BY THE CONSOLE “TRUNK BUSY OUT” FUNCTION. 
WHEN THIS CONDITION IS IN EFFECT THE INCOMING 
BUSY SWITCH AFFECTS THE TRUNK CONDITION AS...

Shipping, Receiving, And Installation Information 
CHART 5-24 
SET E&M/TIE TRUNK CARD OPTION SWITCHES 
Step 
1. 
Action Comments 
CAUTION NOTE 
FOLLOW THE PROCEDURES OUTLINED IN Complete installation forms for 
PARAGRAPH 5.03 WHILE HANDLING PRINTED Trunk Card switch settings before 
CIRCUIT CARDS OR MODULES. setting any switches on the card. 
Attach the antistatic wrist strap to your 
wrist. 
2. 
3. 
4. 
5. Select the required trunk card and set the Refer to Figure 5-27 and notes for 
busy switches to...

Shipping, Receiving, And Installation Information 
TRUNK CONTROL SWITCHES 
I ’ OPEN 
 
2-WIRE SPECIAL 
,N%#? 3) NORMAL SETTING 
1 = CLOSED 
NOT 
OUTGOING 
WINK NOT 
‘N%/llNG 
1 4-WIRE 
N r 
00 K 2 
2 z 
1 1 4 
N%!l:AL 2 = CLOSED 
3 = OPEN 
i = OPEN 
5 = CLOSED 
6 = CLOSED 
7 = CLOSED 
8 = CLOSED 
9 = NOT USED 
10 = NOT USED 
PN103026 
I 
6OOQ 
l---, TRUNK 1 
I , IMPEDANCE 
I 1 SWITCHES 
L ((NOTE 1) 
9iG% 
2-WIRE 
r---i 
I 
I , 
I 
L-J 
4-WIRE 
ID BUSY 
1 
SWITCHES 
TRUNKCONTROL 
SWITCHES 1 
L--l 4-WIRE...

Shipping, Receiving, And Installation Information 
NOTES FOR FIGURE 5-27 
E&M/TIE TRUNK CARD SWITCH FUNCTIONS 
Notes: 
1. Trunk impedance switches are located on the rear face of the trunk card. 
2. Outgoing/incoming switch settings: 
Outgoing 
#usy Switch 
Set to 
Idle 
Busy 
Busy 
Idle t 
Incoming 
3usy Switch 
Set to 
Busy 
Busy 
Idle 
Idle 
Result 
Normal trunk operation - if trunk is 
made busy by attendant, outgoing busy, 
incoming busy condition results. See 
below. 
Trunk cannot be seized,...

Shipping, Receiving, And Installation Information 
CHART 5-25 
SET DID/TIE TRUNK CARD OPTION SWITCHES 
Step 
1. 
2. 
Action 
Comments 
CAUTION NOTE 
FOLLOW THE PROCEDURES OUTLINED IN 
Complete installation forms for 
PARAGRAPH 5.03 WHILE HANDLING PRINTED 
Trunk Card settings before setting 
CIRCUIT CARDS. any switches on the card. 
Attach the antistatic wrist strap to your wrist Refer to Figure 5-28 and notes for 
and select the required trunk card. setting of switches. 
Set TRUNK BUSY switches as...