Mitel SX 200 DIGITAL Pabx General Descriptions Manual

Features Description
l The overriding party cannot manipulate the original connection in any
way.
lIf the overridden extension puts the call on consultation hold or goes on-
hook, the intruding extension is dropped and receives reorder tone.
lIf SUPERSETtelephones involved in a conversation have multicall appear-
ances, an override only occurs if all appearances are busy. Otherwise, the
calling extension receives ringing and the idle multicall appearance rings if
programmed to do so.
lThe warning tone is...

Telephone Features
la 4 party call with one party flashed out of the conference,
l a call with a Call Announce Port in it,
oa call that has another party in the call with the Non-busy Extension fea-
ture enabled,
l a call with the attendant in it,
l a call with 5 parties in it,
lan extension that is overriding another extension,
l a member of a recording hunt group.
ProgrammingTo allow extensions in a CO5 to override, enable COS Option 500 (Override) in
that COS.Industry-standard telephones, 
SUPERSET...

Features Description
lAfter a warning tone, the SUPERSET4DN telephone is connected to the
call.
Override AnnounceDescription
4.32 This feature allows a caller reaching a busy SUPERSET telephone to
override to the called set’s Call Announce Port. This operation takes prece-
dence over normal override.Conditions
The following conditions apply to this feature:
lThe SUPfRSE~4 telephone must be on a call.
lIf the SUPERSET telephone being called does not have a Call Announce.
Port, or is in Handsfree mode (the...

Telephone Features
Directed Call Pickup allows an extension user to answer any ringing tele-
phone within the system.
See PICKUP GROUPS.Conditions
The following conditions apply to this feature:l
Local Pickup operates only for extensions within the same Pickup Group.
lFor ringing SUPERSE~telephones, the ringing line is scanned for from the
prime line up the 
WPERSETtelephone until a line that can be picked up isfound.
lFor Directed Call Pickup, the scan is done on the extension specified and
not on the...

Features Description
To permit sets in a COS to pick up calls outside their Pickup Group, enable COS
Option 218 (Directed Call Pickup) in that COS.
OperationOperation varies depending upon the type of set as described below.
Local Pickup 
- Industry-standard, SUPERSET3 and SUPERSET3DN
Telephones
When a telephone in the same Pickup Group rings:
lLift the handset-dial tone is returned.
lDial the Call Pickup code-the call is connected.
Local Pickup 
- SUPERSET Telephones
When a telephone in the same Pickup...

Telephone Features
ConditionsThe following conditions apply to this feature:lPrivacy is effective only against other appearances of the line; it has no
effect on Override.
lPrivacy Release is available only on SUPERSEJ4, SUPERSEJ3DN or
SUPERSEJ 4DN telephones.
ProgrammingTo permit Privacy Release operation at a SUPERSEJ3DN telephone, program a
PRIVACY RELEASE Feature Access Key in the appropriate Expand Set (nested)
form of CDE Form 09 
(StationlSUPERSEJ Sets).
OperationOperation varies depending upon...

Features DescriptionConditions
Do Not Disturb has no effect on Reminder.
ProgrammingEnable COS Option 202 (Alarm Call) in the extension’s COS.
To enable industry-standard telephones, 
SUPERSET 3 telephones, and
SUPERSET3DN telephones to use this feature, enable System Option 11 (Auto-
matic Wakeup), and assign an access code to Feature 32 (Automatic Wakeup).Operation
Operation varies depending upon the type of set as described below.Industry-standard, 
SUPERSET 3 and SUPERSET 3DN Telephones
To set or...

Telephone Features
l Press the SAVE softkey.
At the programmed time, the telephone rings once and the LCD shows DIS-
PLAY REMINDER. The reminder sof-tkey prompt flashes.
To acknowledge a timed reminder:
lIf idle, press the REMINDER softkey; the word ACKNOWLEDGED appears
on the LCD.
lIf on a call when the reminder expires, the REMINDER softkey begins flash-
ing, but pressing it does nothing. Press the DISPLAY key and then the 
RE-’
MINDER softkey to acknowledge it.
To Cancel a Timed Reminder:
lWith the...

Features DescriptionConditions
The following conditions apply to this feature:
lThe second language for the SUPERSET telephone is based upon the tele-
phone itself.
lThe language for the SUPfRSE~4DN telephone is selected by a softkey.
The language chosen stays with the Digital Line Card port if the telephone
itself is changed.
ProgrammingNone
OperationOperation varies depending upon the type of set as described below.
SUPERSET 4DN Telephone
0 Press the SUPERKEY.
0 Find and press the Language softkey.
l...

Telephone Features
ProgrammingProgram the secretarial set with at least one Multicall appearance, Secretarial
variant, of the other extension, in the secretarial set’s 
subform of CDE Form 09
(StationlSUPERSET Sets).
OperationThe other extension has Do Not Disturb enabled and there is an incoming call.
At the secretarial set:
0 The multicall appearance rings.
lAnswer the call; the call needs to be transferred to the other extension.
lPress TRANVCONF and dial the other extension’s number.
lThe other...